Rancang Bangun Triptonic Tracking System pada Panel Surya Thin Film
DOI:
https://doi.org/10.22441/incomtech.v14i2.25498Keywords:
Energi Terbarukan, Panel Surya, Triptonic, Thin Film,Abstract
Era globalisasi dan kebangkitan generasi milenial ini Indonesia telah mengalami lonjakan konsumsi energi di tengah munculnya Industri 4.0. Namun, ketergantungan yang besar pada sumber energi tak terbarukan, seperti bahan bakar fosil dan batubara, telah menyebabkan penipisan yang cepat dan konsekuensi lingkungan, termasuk polusi udara dan air. Untuk mengatasi tantangan ini, integrasi sumber energi terbarukan, khususnya energi surya, telah muncul sebagai solusi mutakhir. Studi ini menyajikan pengembangan dan evaluasi prototipe Triptonic Tracking System pada Panel Surya Thin film. Tujuannya adalah untuk membuat prototipe, menilai efisiensi panel surya thin film dengan Sistem Pelacakan Triptonic, dan memaksimalkan pemanfaatan energi matahari melalui teknologi pelacakan inovatif ini. Metodologi penelitian melibatkan dua mode pengujian: Otomatis dan Manual. Selama mode Otomatis, Sistem Pelacakan Triptonik secara otomatis menyelaraskan panel surya dengan posisi matahari, sedangkan mode Manual memungkinkan penyesuaian manual berdasarkan sudut azimuth matahari. Pengukuran arus, tegangan, suhu lingkungan, dan intensitas cahaya dilakukan selama pengujian. Hasil menunjukkan bahwa Sistem Pelacakan Triptonic secara efektif mengikuti sudut matahari selama mode Otomatis, dan mode Manual memungkinkan penyesuaian manual yang fleksibel. Prototipe mencapai tegangan maksimum 4,1080 V selama mode Manual, dengan output daya rata-rata 1,351 watt dan intensitas cahaya rata-rata 123148,75 Candela. Selanjutnya, panel surya Thin film menunjukkan efisiensi 1,801% selama mode Manual. Temuan menunjukkan bahwa Sistem Pelacakan Triptonik menjanjikan untuk meningkatkan efisiensi panel surya secara signifikan.
Downloads
References
Pratama, “Dampak Negatif Penggunaan Energi Fosil dari Sektor Transportasi dan Industri.”
Norbert Lechner, Heating, Cooling, Lighting : Metode Desain untuk Arsitektur. RajaGrafindo Persada, 2007.
Sumpala and A. Tenri, “Analisis Teknis dan Ekonomis Perencanaan Pembangkit Listrik Tenaga Surya (PLTS) Menggunakan Panel Monokristalin dan Polikristalin pada Gedung CSA Fakultas Teknik Universitas Hasanuddin,” 2020.
M. Pagliaro, R. Ciriminna, and G. Palmisano, “BIPV: Merging The Photovoltaic With The Construction Industry,” pp. 61–72, 2010.
S. Town, “Advantages Make Thin Film Solar Panels Shine.”
M. D. Archer, R. Hill, and K. Firm, Clean Electricity From Photovoltaics, vol. 1. 2001.
M. Y. Puriza, W. Yandi, and A. Asmar, “Perbandingan Efisiensi Konversi Energi Panel Surya Tipe Polycrystaline dengan Panel Surya Monocrystaline Berbasis Arduino di Kota Pangkalpinang,” J. Ecotipe (Electronic, Control. Telecommun. Information, Power Eng., vol. 8, no. 1, pp. 47–52, 2021, doi: 10.33019/jurnalecotipe.v8i1.2034.
Y. K. Tiun, I. Yusuf, and A. Hiendro, “PERBANDINGAN KINERJA SEL SURYA JENIS THIN-FILM DAN POLYCRYSTALLINE (Studi Kasus: Pontianak),” J. Tek. Elektro Univ. Tanjung Pura, vol. 2, no. 1, pp. 1–6, 2019.
Y. Prasetyo, B. Triyono, and H. Kusbandono, “Penerapan Smart Relay Untuk Penentuan Posisi Sudut Panel Surya Dengan Metode Astronomi,” JEECAE (Journal Electr. Electron. Control. Automot. Eng., vol. 5, no. 2, pp. 39–41, 2020, doi: 10.32486/jeecae.v5i2.624.
K. W. Fauzi, T. Arfianto, and N. Taryana, “Perancangan dan Realisasi Solar Tracking System Untuk Peningkatan Efisiensi Panel Surya Menggunakan Arduino Uno,” TELKA - Telekomun. Elektron. Komputasi dan Kontrol, vol. 4, no. 1, pp. 63–74, 2018, doi: 10.15575/telka.v4n1.63-74.
D. Ambasari, “PERANCANGAN PURWARUPA PENERAPAN THIN FILM PHOTOVOLTAIC SEBAGAI PENGHASIL ENERGI LISTRIK PADA JENDELA KACA DENGAN PEMASANGAN SECARA VERTIKAL,” 2021.
Downloads
Published
How to Cite
Issue
Section
License
The copyright to this article is transferred to Universitas Mercu Buana (UMB) if and when the article is accepted for publication. The undersigned hereby transfers any and all rights in and to the paper including without limitation all copyrights to UMB. The undersigned hereby represents and warrants that the paper is original and that he/she is the author of the paper, except for material that is clearly identified as to its original source, with permission notices from the copyright owners where required. The undersigned represents that he/she has the power and authority to make and execute this assignment.
We declare that:
1. This paper has not been published in the same form elsewhere.
2. It will not be submitted anywhere else for publication prior to acceptance/rejection by this Journal.
3. A copyright permission is obtained for materials published elsewhere and which require this permission for reproduction.
Furthermore, I/We hereby transfer the unlimited rights of publication of the above mentioned paper in whole to UMB. The copyright transfer covers the exclusive right to reproduce and distribute the article, including reprints, translations, photographic reproductions, microform, electronic form (offline, online) or any other reproductions of similar nature.
The corresponding author signs for and accepts responsibility for releasing this material on behalf of any and all co-authors. This agreement is to be signed by at least one of the authors who have obtained the assent of the co-author(s) where applicable. After submission of this agreement signed by the corresponding author, changes of authorship or in the order of the authors listed will not be accepted.
Retained Rights/Terms and Conditions
1. Authors retain all proprietary rights in any process, procedure, or article of manufacture described in the Work.
2. Authors may reproduce or authorize others to reproduce the Work or derivative works for the authors personal use or for company use, provided that the source and the UMB copyright notice are indicated, the copies are not used in any way that implies UMB endorsement of a product or service of any employer, and the copies themselves are not offered for sale.
3. Although authors are permitted to re-use all or portions of the Work in other works, this does not include granting third-party requests for reprinting, republishing, or other types of re-use.
