Waste Factors Analysis in Instant Noodle Production Process at PT Prakarsa Alam Segar Bekasi: A Lean Six Sigma Approach
DOI:
https://doi.org/10.22441/ihasj.2022.v5i1.05Abstrak
PT Prakarsa Alam Segar is one of the largest noodle-making companies in Indonesia. In its production activities, waste is one of the main problems of PT Prakarsa Alam Segar. This study aims to determine the activities that result in waste and the right solution to minimize waste during the production process. This study focuses on the use of flour raw materials in the production process in the Noodle 2 department. This research is a descriptive qualitative research conducted using the Lean Six Sigma (LSS) approach with the DMAIC (Define, Measure, Analyze, Improve, and Control) method, a framework to fix problematic processes. The analysis techniques used included cause-effect diagrams, SIPOC diagrams, and FMEA. The results showed that the failure and waste of flour material during the instant noodle production process in the Noodle 2 department was related to 3 processes on the production line, namely: (1) Roll Press, (2) Cutting, and (3) Frying.
Unduhan
Referensi
Herjanto, Eddy. (1999). Manajemen Produksi dan Operasi. Jakarta : PT. Gramedia Widia Sara ndonesia.
S Assuari. (2004). Manajemen Pemasaran: Dasar, Konsep dan Strategi. Jakarta: PT Grafindo Persada.
Assauri, Sofjan. (1998). Manajemen Produksi dan Operasi. Jakarta: Lembaga Penerbit Fakultas Ekonomi Universitas Indonesia
Gaspersz, Vincent. (1998). Manajemen Produksi Total, Strategi Peningkatan Produktivitas Bisnis Global. Jakarta : Gramedia Pustaka Utama.
Gaspersz, Vincent. (2001). Total Quality Management (TQM). Jakarta :
PT. Gramedia Pustaka Utama.
Gazpersz, Vincent. (2002). Production Planning and Inventory Control.
Jakarta : PT Gramedia Pustaka Utama.
Gaspersz, Vincent., Avanti Fontana. (2007). Organizational Excellence
Jakarta : Gramedia Pustaka Utama.
Gaspersz, Vincent., Avanti Fontana. (2011). Lean Six Sigma for Manufacturing and Service Industries. Bogor : Vinchristo Publication.
Pyzdek, T. (2001). The Six Sigma Handbook-A Complete Guide for Greenbelts, Blackbelts, and Managersat All Levels. New York : McGraw-Hill, Inc.
Kusmayadi, B. and Vikaliana, R. (2021) ‘Pendekatan Konsep Lean untuk Mengurangi Waste Transportasi dengan Optimasi Truk (Studi Kasus di Perusahaan Distributor PT XYZ)’, Jurnal Manajemen Logistik, 1(1), pp. 20–28. Available at: https://ojs.stiami.ac.id/index.php/JUMATIK/article/view/1241.
Lestari, Kartika 2019 “Penerapan Lean Manufakturing untuk Mengidentifikasi Waste pada Proses Produksi Kain Knitting di Lantai Produksi PT.XYZ”. Jurnal Teknik Industri. Universitas Majalengka. Kota Majalengka
Y. Setyawan P,N Handayani, dan H.Suliantoro, 2017 “Analisis Pemborosan (WASTE) Material Pada Proses Produksi Aqua Kemasan 240ml Di PT TIRTA INVESMA Klaten”. jurnal industrial Engineering vol. 6 no. 2, Universitas Diponegoro.
Haris Dwi Armyanto, Dwi Djumhariyanto, Santoso Mulyadi 2020 “Penerapan Lean Manufakturing Dengan Metode VSM Dan FMEA Untuk Mereduksi Pemborosan Produksi Sarden” jurnal Energi Dan manufaktur 13(1), 37-42. Universitas Jember, Kampus tegal Boto Jember.
Bagus Andres Lesmana. 2018 “Analisis Penerapan Lean Manufacturing Untuk Mengurangi Pemborosan DI Produksi Pipa PVC DI PT Tjakrindo Mas, Gresik”. Universitas Muhammadiyah Gresik
Filscha Nurprihatin, Nur Eka Yulia, Dino Cae saron 2007 “Usulan Pengurangan Pemborosan Pada Proses Penjahitan Menggunaka Metode Lean Six Sigma”. Universitas Bunda Maria, Jakarta Utara.
Sri Indrawati, Muhammad Ridwansyah. 2015 “Manufacturing Continuous Improvement Using Lean Six Sigma: An Iron Ores Industry Case Application” Industrial Engineering and Service Science, Universitas I
Unduhan
Diterbitkan
Cara Mengutip
Terbitan
Bagian
Lisensi
The copyright to this article is transferred to Universitas Mercu Buana (UMB) if and when the article is accepted for publication. The undersigned hereby transfers any and all rights in and to the paper including without limitation all copyrights to UMB. The undersigned hereby represents and warrants that the paper is original and that he/she is the author of the paper, except for material that is clearly identified as to its original source, with permission notices from the copyright owners where required. The undersigned represents that he/she has the power and authority to make and execute this assignment.
We declare that:
1. This paper has not been published in the same form elsewhere.
2. It will not be submitted anywhere else for publication prior to acceptance/rejection by this Journal.
3. A copyright permission is obtained for materials published elsewhere and which require this permission for reproduction.
Furthermore, I/We hereby transfer the unlimited rights of publication of the above mentioned paper in whole to UMB. The copyright transfer covers the exclusive right to reproduce and distribute the article, including reprints, translations, photographic reproductions, microform, electronic form (offline, online) or any other reproductions of similar nature.
The corresponding author signs for and accepts responsibility for releasing this material on behalf of any and all co-authors. This agreement is to be signed by at least one of the authors who have obtained the assent of the co-author(s) where applicable. After submission of this agreement signed by the corresponding author, changes of authorship or in the order of the authors listed will not be accepted.
Retained Rights/Terms and Conditions
1. Authors retain all proprietary rights in any process, procedure, or article of manufacture described in the Work.
2. Authors may reproduce or authorize others to reproduce the Work or derivative works for the authors personal use or for company use, provided that the source and the UMB copyright notice are indicated, the copies are not used in any way that implies UMB endorsement of a product or service of any employer, and the copies themselves are not offered for sale.
3. Although authors are permitted to re-use all or portions of the Work in other works, this does not include granting third-party requests for reprinting, republishing, or other types of re-use.
