Analysis of BTA16 CNC Machine Performance Improvement with Total Productive Maintenance Approach
DOI:
https://doi.org/10.22441/ijiem.v3i3.15770Abstract
Machinery or production equipment was the most important part of a production system. Machines need effective and efficient maintenance to be able to guarantee and support the production process to operate properly. The gas filter industry is an industry that produces air and gas filters. The gas filter industry has many production machines, one of which is CNC BTA16. This machine often has problems such as downtime that interfere with smooth production. The purpose of this study was to determine the problems in the CNC BTA16 production machine and provide recommendations for improvements to improve machine performance. The approach used is Total Productive Maintenance. Problem analysis was carried out through Focus Group Discussions with experts. The results showed that the cause of the engine is not optimal comes from abnormal heat in the gearbox on the engine spindle component caused by operator error when inputting data. The results of the calculation of the OEE value on the BTA16 CNC machine during the January – December 2021 period, the average OEE value was 73%. Suggested improvements are to make a special schedule for maintenance, check all speeches, and conduct training for employees to improve knowledge and skills.Downloads
References
Agung, F. Y., & Siahaan, A. (2020). Overall Equipment Effectiveness (OEE) Through Total Productive Maintenance (TPM) Practices: a Case Study in Chemical Industry. Emerging Markets : Business and Management Studies Journal, 7(1), 23–36. https://doi.org/10.33555/ijembm.v7i1.124
Candra, N. E., Susilawati, A., Herisiswanto, & Setiady, W. (2017). Implementation of Total Productive Maintenance (TPM) to Improve Sheeter Machine Performance. MATEC Web of Conferences, 135, 1–11. https://doi.org/10.1051/matecconf/201713500028
Dewi, S., Alhilman, J., & Atmaji, F. T. D. (2020). Evaluation of Effectiveness and Cost of Machine Losses using Overall Equipment Effectiveness (OEE) and Overall Equipment Cost Loss (OECL) Methods, a case study on Toshiba CNC Machine. IOP Conference Series: Materials Science and Engineering, 847(1). https://doi.org/10.1088/1757-899X/847/1/012020
Hendra, Setiawan, I., Hernadewita, & Hermiyetti. (2021). Evaluation of Product Quality Improvement Against Waste in the Electronic Musical Instrument Industry. Jurnal Ilmiah Teknik Elektro Komputer Dan Informatika, 7(3), 402–411. https://doi.org/10.26555/jiteki.v7i3.21904
Hernadewita, H., Rochmad, I., Hendra, H., Hermiyetti, H., & Yuliani, E. N. S. (2019). An analysis of the implementation of the Taguchi method to improve the production of pulp on hydra pulper milling. International Journal of Production Management and Engineering, 7(2), 125. https://doi.org/10.4995/ijpme.2019.10163
Kurnia, H., Jaqin, C., & Purba, H. H. (2022). The PDCA Approach with OEE Methods for Increasing Productivity in the Garment Industry. Jurnal Ilmiah Teknik Industri : Jurnal Keilmuan Teknik Dan Manajemen Industri, 10(1), 57–68. https://doi.org/10.24912/jitiuntar.v10i1.15430
Kurnia, H., Jaqin, C., Purba, H. H., & Setiawan, I. (2021). Implementation of Six Sigma in the DMAIC Approach for Quality Improvement in the Knitting Socks Industry. Tekstilvemuhendis, 28(124), 269–278. https://doi.org/10.7216/1300759920212812403
Manurung, H., Fahri, A., Purba, H. H., & Kurnia, H. (2021). Accidence Analysis Work with Failure Mode and Effect Analysis Method at Coating Service Industry in Indonesia. Specktrum Industry Journal, 19(2), 135–144. https://doi.org/10.12928/si.v19i2.20585
Mkalaf, K. A. (2020). Total Productive Maintenance: A Safety Approach to Optimize the Anesthesia Device Outcomes. ICITM 2020 - 2020 9th International Conference on Industrial Technology and Management, 122–126. https://doi.org/10.1109/ICITM48982.2020.9080374
Nallusamy, S. (2016). Enhancement of productivity and efficiency of CNC machines in a small-scale industry using total productive maintenance. International Journal of Engineering Research in Africa, 25(August), 119–126. https://doi.org/10.4028/www.scientific.net/JERA.25.119
Nurprihatin, F., Angely, M., & Tannady, H. (2019). Total productive maintenance policy to increase effectiveness and maintenance performance using overall equipment effectiveness. Journal of Applied Research on Industrial Engineering, 6(3), 184–199. https://doi.org/10.22105/jarie.2019.199037.1104
Perdana, S., & Santoso, D. (2019). Implementation of repairing production machine productivity of spare parts speaker based on OEE value achievement. Journal of Applied Research on Industrial Engineering, 6(1), 26–32. https://doi.org/10.22105/JARIE.2019.169386.1075
Prabowo, H. A., Suprapto, Y. B., & Farida, F. (2018). The Evaluation of Eight Pillars Totals Productive Maintenance (TPM) Implementation and Their Impact on Overall Equipment Effectiveness (OEE) and Waste. Sinergi, 22(1), 13–18. https://doi.org/10.22441/sinergi.2018.1.003
Purba, H. H., Wijayanto, E., & Aristiara, N. (2018). Analysis of Overall Equipment Effectiveness (OEE) with Total Productive Maintenance Method on Jig Cutting : A Case Study in Manufacturing Industry. Journal of Scientific and Engineering Research, 5(7), 397–406.
Saleem, F., Nisar, S., Khan, M. A., Khan, S. Z., & Sheikh, M. A. (2017). Overall equipment effectiveness of tire curing press: A case study. Journal of Quality in Maintenance Engineering, 23(1), 39–56. https://doi.org/10.1108/JQME-06-2015-0021
Sen, R. S., Majumdar, G., & Nallusamy, S. (2019). Enhancement of overall equipment effectiveness through the implementation of total productive maintenance. Proceedings of the International Conference on Industrial Engineering and Operations Management, July, 475–484.
Setiawan, I. (2021). Integration of Total Productive Maintenance and Industry 4.0 to increase the productivity of NC Bore machines in the Musical Instrument Industry. Proceedings of the 11th Annual International Conference on Industrial Engineering and Operations Management Singapore, 4701–4711.
Setiawan, S. (2021). A Systematic Literature Review of Total Productive Maintenance On Industries. Performa: Media Ilmiah Teknik Industri, 20(2), 97. https://doi.org/10.20961/performa.20.2.50087
Sjarifudin, D., Kurnia, H., Purba, H. H., & Jaqin, C. (2022). Implementation of the six sigma approach for increasing the quality of formal men’s jackets in the garment industry. Jurnal Sistem Dan Manajemen Industri, 6(1), 33–44. https://doi.org/https://doi.org/10.30656/jsmi.v6i1.4359
Stamatis, D. H. (1995). Failure Mode and Effect Analysis FMEA from Theory to Execution. ASQC Quality Press.
Sukma, D. I., Prabowo, H. A., Setiawan, I., Kurnia, H., & Maulana, I. (2022). Implementation of Total Productive Maintenance to Improve Overall Equipment Effectiveness of Linear Accelerator Synergy Platform Cancer Therapy. International Journal of Engineering, 35(7), 1246–1256. https://doi.org/10.5829/ije.2022.35.07a.04
Sukma, D. I., Setiawan, I., & Purba, H. H. (2021). A Systematic Literature Review of Overall Equipment Effectiveness Implementation in Asia. Journal of Industrial & Quality Engineering, 9(1), 109–117. https://doi.org/10.34010/iqe.v9i1.4015
Thorat, R., & Mahesha, G. T. (2020). Improvement in productivity through TPM Implementation. Materials Today: Proceedings, 24, 1508–1517. https://doi.org/10.1016/j.matpr.2020.04.470
Zuniawan, A. (2020). A Systematic Literature Review of Failure Mode and Effect Analysis (FMEA) Implementation in Industries. IJIEM (Indonesian Journal of Industrial Engineering & Management), 1(2), 59–68.
Downloads
Published
How to Cite
Issue
Section
License
The copyright to this article is transferred to Universitas Mercu Buana (UMB) if and when the article is accepted for publication. The undersigned hereby transfers any and all rights in and to the paper including without limitation all copyrights to UMB. The undersigned hereby represents and warrants that the paper is original and that he/she is the author of the paper, except for material that is clearly identified as to its original source, with permission notices from the copyright owners where required. The undersigned represents that he/she has the power and authority to make and execute this assignment.
We declare that:
1. This paper has not been published in the same form elsewhere.
2. It will not be submitted anywhere else for publication prior to acceptance/rejection by this Journal.
3. A copyright permission is obtained for materials published elsewhere and which require this permission for reproduction.
Furthermore, I/We hereby transfer the unlimited rights of publication of the above mentioned paper in whole to UMB. The copyright transfer covers the exclusive right to reproduce and distribute the article, including reprints, translations, photographic reproductions, microform, electronic form (offline, online) or any other reproductions of similar nature.
The corresponding author signs for and accepts responsibility for releasing this material on behalf of any and all co-authors. This agreement is to be signed by at least one of the authors who have obtained the assent of the co-author(s) where applicable. After submission of this agreement signed by the corresponding author, changes of authorship or in the order of the authors listed will not be accepted.
Retained Rights/Terms and Conditions
1. Authors retain all proprietary rights in any process, procedure, or article of manufacture described in the Work.
2. Authors may reproduce or authorize others to reproduce the Work or derivative works for the authors personal use or for company use, provided that the source and the UMB copyright notice are indicated, the copies are not used in any way that implies UMB endorsement of a product or service of any employer, and the copies themselves are not offered for sale.
3. Although authors are permitted to re-use all or portions of the Work in other works, this does not include granting third-party requests for reprinting, republishing, or other types of re-use.
