Analysis of Service Quality on Lestari Seserahan SME Customer Satisfaction with the Customer Satisfaction Index (CSI) and Importance Performance Analysis (IPA) Methods
DOI:
https://doi.org/10.22441/ijiem.v4i1.19198Keywords:
Customer, Satisfaction, Customer Satisfaction Index (CSI), Importance Performance Analysis (IPA)Abstract
Lestari Seserahan is a business unit engaged in offering services, utilizing business digitalization to promote its business to achieve customer satisfaction. Customer satisfaction can, of course, be influenced by various factors such as the number of manufacturers offering in the same field, the price and quality offered, and the location of available business locations. Based on this, Small and Medium Enterprise (SME) business actors want to know the factors that can influence customer satisfaction so that there are no wrong steps in determining what strategy will be used to make improvements and maintain the level of customer satisfaction using the Customer Satisfaction Index (CSI) method and Importance Performance Analysis (IPA) method. The purpose of the CSI method is to determine customer satisfaction. In contrast, the IPA method aims to identify attributes based on their respective importance and is illustrated using a Cartesian diagram. The calculations using the CSI method yield results of 92.20% and are included in the "Very Satisfied" category, followed by the IPA method, which is described in the Cartesian diagram that no attributes are included in Quadrant I (Top Priority). In Quadrant II (Maintain Achievement), attributes 1, 2, 3, 9, 10, 11, 12, 13, 14, 15, 17, and 19. In Quadrant III (Low Priority), namely attributes 4, 5, 6, 7, 16, and 18. In Quadrant IV (Excessive), only one attribute is included in the plotting of this quadrant, namely attribute 8.Downloads
References
Alghifari. (2019). Mengukur Kualitas Layanan dengan Indeks Kepuasan, Metode Importance Performance Analysis (IPA) dan Model Kano. BPFE.
Asfary, O. R. (2018). Analisis Kepuasan Pelanggan menggunakan Pendekatan Importance Performance Analysis dan Customer Satisfaction Index. Universitas Islam Indonesia.
Choriah, & Nurmiati, E. (2021). Analisis Kepuasan Pengguna Whatsapp Sebagai Media Knowledge Sharing Menggunakan Metode Pieces. Jurnal Teknologi, 14(1), 61–68. https://doi.org/10.24853/jurtek.14.1.61-68
Darmawan, S. B. (2009). Perancangan Meja dan Kursi Pada Alat Pemotong Bulu Industri Shuttle Cock Merk T3 Berdasarkan Pendekatan Antropometri di Kelurahan Serengan Surakarta. Universitas Sebelas Maret.
Devani, V., & Rizko, R. A. (2016). Analisis Kepuasan Pelanggan dengan Menggunakan Metode Customer Satisfaction Index (CSI) Dan Potential Gain In Customer Value (PGCV). Jurnal Rekayasa Dan Manajemen Sistem Informasi, 2(2), 24–29.
Halim, F., Kumiullah, Z., Butarbutar, M., Efendi, Sudarso, A., Purba, B., Lie, D., Sisca, Simarmata, H. M. P., Permadi, L. A., & Novela, V. (2021). Manajemen Pemasaran Jasa. Yayasan Kita Menulis.
Hardi Purba, H., Debora, F., Jaqin, C., & Adiyatna, H. (2021). Service Quality Analysis: An Empirical Study of Customer Satisfaction in a Healtcare. Jurnal Teknologi Dan Manajemen, 19(1), 33–40. https://doi.org/https://doi.org/10.52330/jtm.v19i1.22
Herlina, V. (2019). Panduan Praktis Mengolah Data Kuesioner Menggunakan SPSS (P. A. M. Komputindo (ed.)).
Hidayat, F. N. P. (2020). Analisis Tingkat Kepuasan Nasabah Terhadap Kualitas Pelayanan BRI Syari’ah Dengan Metode Importance Performance Analysis (IPA) dan Customer Satisfaction Index (CSI). Institut Agama Islam Negeri (IAIN).
Hirzan, A. (2019). Analisis Kepuasan Pelanggan PT. Samudera Surabaya Logistik Dengan Implementasi Marketing Mix 4P Menggunakan Metode Importance Performance Analysis. Politeknik Perkapalan Negeri Surabaya.
Kotler, P. (2005). Manajemen Pemasaran. PT. Prenhallindo.
Kusumadiningrum, R. (2020). Analisis Kualitas Pelayanan untuk meningkatkan Kepuasan Pelangggan pada Kantin ITN Malang Kampus 1 menggunakan Metode Service Quality. Jurnal Valtech (Jurnal Mahasiswa Teknik Industri), 3(2), 177–182.
Lestari, S., & Pratama, S. A. (2018). Analisis Tingkat Kepuasan Pelanggan Di Pasar Sore Purijaya Tangerang Dengan Metode Swot. Jurnal Teknik: Universitas Muhammadiyah Tangerang, 7(2), 95–101.
Rusmawati DJ, Y., Nur Azizah, L., & NajiahEvi, F. (2021). Total Quality Management. CV Media Sains Indonesia.
Sihotang, F. P., & Oktarina, R. (2022). Penggunaan Metode Importance Performance Analysis (IPA) dan Customer Satisfaction Index (CSI) Dalam Menganalisis Pengaruh Sistem E-Service Terhadap Tingkat Kepuasan Pelanggan. Jurnal Teknologi Sistem Informasi, 3(1), 1–12.
Tjiptono, F. (2006). Manajemen Jasa. And Offset.
Umam, R. K., & Hariastuti, N. P. (2018). Analisa Kepuasan Pelanggan dengan menggunakan Metode Customer Satisfaction Index (CSI) dan Importance Performance Analysis (IPA). Seminar Nasional Sains Dan Teknologi Terapan VI, 339–344.
Downloads
Published
How to Cite
Issue
Section
License
The copyright to this article is transferred to Universitas Mercu Buana (UMB) if and when the article is accepted for publication. The undersigned hereby transfers any and all rights in and to the paper including without limitation all copyrights to UMB. The undersigned hereby represents and warrants that the paper is original and that he/she is the author of the paper, except for material that is clearly identified as to its original source, with permission notices from the copyright owners where required. The undersigned represents that he/she has the power and authority to make and execute this assignment.
We declare that:
1. This paper has not been published in the same form elsewhere.
2. It will not be submitted anywhere else for publication prior to acceptance/rejection by this Journal.
3. A copyright permission is obtained for materials published elsewhere and which require this permission for reproduction.
Furthermore, I/We hereby transfer the unlimited rights of publication of the above mentioned paper in whole to UMB. The copyright transfer covers the exclusive right to reproduce and distribute the article, including reprints, translations, photographic reproductions, microform, electronic form (offline, online) or any other reproductions of similar nature.
The corresponding author signs for and accepts responsibility for releasing this material on behalf of any and all co-authors. This agreement is to be signed by at least one of the authors who have obtained the assent of the co-author(s) where applicable. After submission of this agreement signed by the corresponding author, changes of authorship or in the order of the authors listed will not be accepted.
Retained Rights/Terms and Conditions
1. Authors retain all proprietary rights in any process, procedure, or article of manufacture described in the Work.
2. Authors may reproduce or authorize others to reproduce the Work or derivative works for the authors personal use or for company use, provided that the source and the UMB copyright notice are indicated, the copies are not used in any way that implies UMB endorsement of a product or service of any employer, and the copies themselves are not offered for sale.
3. Although authors are permitted to re-use all or portions of the Work in other works, this does not include granting third-party requests for reprinting, republishing, or other types of re-use.
