Readiness Analysis of Politeknik STMI Jakarta Towards Implementation and Certification of ISO 21001:2018
DOI:
https://doi.org/10.22441/ijiem.v4i2.20145Keywords:
Quality Management System, Higher education, ISO 21001, 2018, Gap Analysis MethodAbstract
Higher education has great demands and responsibilities to ensure their student graduates as highly competent human resources. Thus, effective and efficient management is required for higher education’s business process. To ensure their quality in process and result, compliance with national regulations and standards related to higher education is a must, and quality conformity with international standards is also one of the efforts of higher education institutions to improve their quality and competitiveness. ISO 21001:2018 is one of the international standards and best practice management systems for educational organizations that are widely used by various higher education institutions in the world. Considering Politeknik STMI Jakarta’s vision for resulting competent human resources, and that it is not yet certified by ISO 21001: 2018, this study is conducted to know the extent of readiness of Politeknik STMI Jakarta towards implementation and certification of ISO 21001:2018. The method used is the gap analysis method between conditions existing in Politeknik STMI Jakarta to ISO 21001:2018 standard. The results showed that the level of readiness of Politeknik STMI Jakarta is 88.85% which showed that the implementation of the clause requirements is mostly carried out but not consistently. The conclusion that can be drawn from the research is that Politeknik STMI Jakarta is ready to implement and carry out ISO 21001: 2018 certification.Downloads
References
Aniskina, N., & Terekhova, E. (2019). Innovative methods for quality management in educational organizations. International Journal of Quality & Reliability Management.
Faura, M. C., Sanchez-Ruiz, D., Tello, P., Tullume, J., & Vilchez-Sandoval, J. (2019). Compliance Assessment of ISO 21001:2018 Clause 8.5 in the Systems Engineering Program of Universidad Autónoma del Perú. Proceedings of the 2019 International Symposium on Engineering Accreditation and Education, ICACIT 2019, 0–4. https://doi.org/10.1109/ICACIT46824.2019.9130325
Gilbert, D. D. (2020). ISO Alongside, Instead, or Inside? The potential of ISO 21001:2018 to change and challenge higher education accreditation. International Journal of Business and Applied Social Science, October 2020, 45–52. https://doi.org/10.33642/ijbass.v6n10p5
ISO. (2018). INTERNATIONAL STANDARD Educational organizations — Management systems for educational organizations — Requirements with guidance for use. 2018.
Kovalenko, S. M., Romelashvili, O. S., Zborovska, T. V., & Blagun, O. D. (2020). General aspects of introduction of management systems in educational organizations in pursuance of ISO 21001: 2018. Management, economy and quality assurance in pharmacy, (4 (64)), 4-9.
Kemenristekdikti. (2019). Statistik Pendidikan Tinggi (Higher Education Statistics) 2019. In Pusdatin Kemenristekdikti. http://www.mohe.gov.my/web_statistik/
Prihatmadji, W., Zulfikar, A., Oktafiani, S., Hendrawan, A., & Pranita, F. L. (2022). Korelasi Antara Sistem Manajemen Mutu ISO 9001: 2015 dengan Sistem Manajemen Pendidikan ISO 21001: 2018. Jurnal Lentera Bisnis, 11(2), 190-204.
UU No 12 Tahun 2012 tentang Pendidikan Tinggi, 66 37 (2012).
Rahmadi, & Iskandar, A. R. (2020). Analisis Kesiapan Sertifikasi ISO 21001 : 2018 dengan Metode Gap Analysis ( Studi Kasus pada Akademi Telkom Jakarta ). Journal of Informatics and Communication Technology (JICT), 21(1), 1–10.
Republik Indonesia. (2016). Peraturan Menteri Riset Dan Teknologi Pendidikan Tinggi Nomor 62 Tahun 2016 Tentang Sistem Penjaminan Mutu Pendidikan Tinggi. 3.
Rohayati, Y., & Delvika, R. H. (2020). Preparation for the Implementation of ISO 21001: 2018 using Assistance Program: Case study of Telkom Vocational High School. In Proceeding of 12th International Seminar on Industrial Engineering and Management ISSN (p. 774X).
Silaeva, V. V., & Semenov, V. P. (2018). Internal Education Quality Assurance through Standardization of Educational Organization Management System. Proceedings of the 2018 International Conference “‘Quality Management, Transport and Information Security, Information Technologies’”, IT and QM and IS 2018, 70–73. https://doi.org/10.1109/ITMQIS.2018.8525083
Sitorus, T. M. (2021). Penyelarasan ISO 21001: 2018 Dengan Peraturan Standar Nasional Pendidikan Tinggi Nomor 3 Tahun 2020. JAS-PT (Jurnal Analisis Sistem Pendidikan Tinggi Indonesia), 5(2), 133-142.
Vilchez-Sandoval, J., Vasquez-Paragulla, J., Andrade-Arenas, L., & Cortez-Maldonado, W. (2020). Appraisal of the provision of educational products and services according to the ISO-21001 standard in the faculty of sciences and engineering from the Sciences and Humanities University. EDUNINE 2020 - 4th IEEE World Engineering Education Conference: The Challenges of Education in Engineering, Computing and Technology without Exclusions: Innovation in the Era of the Industrial Revolution 4.0, Proceedings, 3–6. https://doi.org/10.1109/EDUNINE48860.2020.9149520
Wibisono, E. (2018). The new management system ISO 21001: 2018: What and why educational organizations should adopt it. In Proceeding of 11th International Seminar on Industrial Engineering and Management (pp. 66-73).
Wilkins, S. (2020). The positioning and competitive strategies of higher education institutions in the United Arab Emirates. International Journal of Educational Management, 34(1), 139–153. https://doi.org/10.1108/IJEM-05-2019-0168
Downloads
Published
How to Cite
Issue
Section
License
The copyright to this article is transferred to Universitas Mercu Buana (UMB) if and when the article is accepted for publication. The undersigned hereby transfers any and all rights in and to the paper including without limitation all copyrights to UMB. The undersigned hereby represents and warrants that the paper is original and that he/she is the author of the paper, except for material that is clearly identified as to its original source, with permission notices from the copyright owners where required. The undersigned represents that he/she has the power and authority to make and execute this assignment.
We declare that:
1. This paper has not been published in the same form elsewhere.
2. It will not be submitted anywhere else for publication prior to acceptance/rejection by this Journal.
3. A copyright permission is obtained for materials published elsewhere and which require this permission for reproduction.
Furthermore, I/We hereby transfer the unlimited rights of publication of the above mentioned paper in whole to UMB. The copyright transfer covers the exclusive right to reproduce and distribute the article, including reprints, translations, photographic reproductions, microform, electronic form (offline, online) or any other reproductions of similar nature.
The corresponding author signs for and accepts responsibility for releasing this material on behalf of any and all co-authors. This agreement is to be signed by at least one of the authors who have obtained the assent of the co-author(s) where applicable. After submission of this agreement signed by the corresponding author, changes of authorship or in the order of the authors listed will not be accepted.
Retained Rights/Terms and Conditions
1. Authors retain all proprietary rights in any process, procedure, or article of manufacture described in the Work.
2. Authors may reproduce or authorize others to reproduce the Work or derivative works for the authors personal use or for company use, provided that the source and the UMB copyright notice are indicated, the copies are not used in any way that implies UMB endorsement of a product or service of any employer, and the copies themselves are not offered for sale.
3. Although authors are permitted to re-use all or portions of the Work in other works, this does not include granting third-party requests for reprinting, republishing, or other types of re-use.
