Defect Analysis of ZA Fertilizer Products with Fault Tree Analysis (FTA) and Failure Mode Effect Analysis (FMEA) Methods at PT. XYZ
DOI:
https://doi.org/10.22441/ijiem.v4i3.20958Kata Kunci:
Defect, Fertilizer, Product quality, Fault tree analysis, FMEAAbstrak
PT XYZ is one of the fertilizer producers in Indonesia. The problem that often occurs in the company is that there are product defects that cause the production process to be ineffective. One of the products that has a high percentage of defects is non-subsidized ZA fertilizer. Research using Fault Tree Analysis (FTA) and Failure Mode and Effect Analysis (FMEA) methods to find out the causes of rejects or rejects in products and can provide preventive solutions so that these defects do not occur. In this study, 4 types of defects were found, namely failed weighing with a chance of defect occurrence of 0.138%, mixed color defect with a chance of defect occurrence of 0.115%, crystal clumping defect with a chance of defect occurrence of 0.115%, and defect mixed with dirt with a chance of defect occurrence of 0.116%, mixed color, crystal clumping, and mixed with dirt. The root causes of these defects include less careful operators, hasty operators, operators do not check the fertilizer bag machine needs maintenance, machine trouble, operators do not check the level on the machine regularly, poor air circulation, lack of cleaning facilities, operators work not according to SOP, lack of supervision, lazy operators, no barrier with other fertilizers, lack of lighting.Unduhan
Referensi
Benedictus., & Rochmoeljati. (2021). Analisa Pencegahan Reject Pada Produksi Roll Karet Dengan Fault Tree Analysis (FTA) Dengan Rekomendasi Perbaikan Failure Mode And Effects Analysis (FMEA) Di PT. Ustegra (Usaha Tehnik Grafika). Juminten : Jurnal Manajemen Industri dan Teknologi, 2(5)
Clemens, P. (1993). Fault Tree Analysis, Fourth Edition. Jacobs Sverdrup, George Washington University.
Kartika, H., Kasad, F., & Parjoko, A. (2019). Analisa Pengendalian Kualitas Produk Versaboard Dengan Menggunakan Metode Fault Tree Analysis (FTA) Dan Metode Failure Mode And Effect Analysis (FMEA). Jurnal teknokris, 22(2).https://jurnalteknik.unkris.ac.id/index.php/teknokris/article/view/99
Kartikasari, V., & Romadhon, H. (2019). Analisa Pengendalian dan Perbaikan Kualitas Proses Pengalengan Ikan Tuna Menggunakan Metode Failure Mode and Effect Analysis (FMEA) dan Fault Tree Analysis (FTA) Studi kasus di PT XXX Jawa Timur. Journal of Industrial View, 1(1).https://jurnal.unmer.ac.id/index.php/jiv/article/view/2999
Lestari, A., & Mahbubah, N. (2021). Analisis Defect Proses Produksi Songkok Berbasis Metode FMEA dan FTA di Home - Industri Songkok GSA Lamongan. Jurnal Serambi Engineering, 6(3)
https://doi.org/10.32672/jse.v6i3.3254
Mislan., Purba, H, H. (2020). Quality Control of Steel Deformed Bar Product using Statistical Quality Control (SQC) and Failure Mode and Effect Analysis (FMEA). IOP Conf. Ser.: Mater. Sci. Eng. 1007 012119. doi:10.1088/1757-899X/1007/1/012119
Suliantoro, H., Backhtiar, A., & Sembiring, J. (2018). Analisis Penyebab Kecacatan Dengan Menggunkan Metode Failure Mode And Effect Analysis (FMEA) Dan Metode Fault Tree Analysis (FTA) Di PT. Alam Daya Sakti Semarang. Industrial Engineering Online Journal, 7(1).https://ejournal3.undip.ac.id/index.php/ieoj/article/view/20596
Supriyadi, Edi. (2021). Analisis Pengendalian Kualitas Produk Dengan Statistical Process Control (SPC). Tangerang: Pascal Books.
Taufik. (2021). Pengendalian Kualitas Produk Perlengkapan Kamar Mandi (Sanitary Asessories) Menggunakan Metode DMAIC. Tangerang: Pascal Books
Unduhan
Diterbitkan
Cara Mengutip
Terbitan
Bagian
Lisensi
The copyright to this article is transferred to Universitas Mercu Buana (UMB) if and when the article is accepted for publication. The undersigned hereby transfers any and all rights in and to the paper including without limitation all copyrights to UMB. The undersigned hereby represents and warrants that the paper is original and that he/she is the author of the paper, except for material that is clearly identified as to its original source, with permission notices from the copyright owners where required. The undersigned represents that he/she has the power and authority to make and execute this assignment.
We declare that:
1. This paper has not been published in the same form elsewhere.
2. It will not be submitted anywhere else for publication prior to acceptance/rejection by this Journal.
3. A copyright permission is obtained for materials published elsewhere and which require this permission for reproduction.
Furthermore, I/We hereby transfer the unlimited rights of publication of the above mentioned paper in whole to UMB. The copyright transfer covers the exclusive right to reproduce and distribute the article, including reprints, translations, photographic reproductions, microform, electronic form (offline, online) or any other reproductions of similar nature.
The corresponding author signs for and accepts responsibility for releasing this material on behalf of any and all co-authors. This agreement is to be signed by at least one of the authors who have obtained the assent of the co-author(s) where applicable. After submission of this agreement signed by the corresponding author, changes of authorship or in the order of the authors listed will not be accepted.
Retained Rights/Terms and Conditions
1. Authors retain all proprietary rights in any process, procedure, or article of manufacture described in the Work.
2. Authors may reproduce or authorize others to reproduce the Work or derivative works for the authors personal use or for company use, provided that the source and the UMB copyright notice are indicated, the copies are not used in any way that implies UMB endorsement of a product or service of any employer, and the copies themselves are not offered for sale.
3. Although authors are permitted to re-use all or portions of the Work in other works, this does not include granting third-party requests for reprinting, republishing, or other types of re-use.
