Work Posture analysis Using the Rapid Entire Body Method Assessment (REBA) to Reduce the Risk of Injury in Line I Employees Upper Production PT. XYZ
DOI:
https://doi.org/10.22441/ijiem.v5i1.22934Keywords:
Ergonomic, REBA, MSDsAbstract
This research aim to solve the problem of ergonomic standart in the process of making an upper shoes by implementing Rapid Entire Body Assessment (REBA). This method is suitable to solve job body posture problem of the worker of PT XYZ based in Sidoarjo. PT XYZ is an international company and one of the expantion company from Denmark, they produce high quality shoes with more than 7000 workers. There are several plaint from the worker that they had a featigue in some part of te body. REBA assess the score from the top of the body to the bottom of the body and giving report are report of the posture risk. By using this method, the solution can be found with giving the right posture of the worker body while working their duty. The result of the research are confirmed to reduce the risk of musculoskeletal disorders (MSDs) the posture need an improvement by changing the moves of trunk, upper arm, and wrist. Reba score are known in 6 and it’s increasing to 3 after the improvement.Downloads
References
Akbar, T. M., Nugraha, A. E., & Cahyanto, W. E. (2023). Analisis postur tubuh pekerja di pabrik roti Riza Bakery menggunakan metode Rapid Entire Body Assessment (REBA). Journal of Integrated System, 6(1), 32–41. https://doi.org/10.28932/jis.v6i1.6004
Haekal, J., Hanum, B., & Prasetio, D. E. (2020). Analysis of Operator Body Posture Packaging Using Rapid Entire Body Assessment (REBA) Method: ACase Study ofPharmaceutical Companyin Bogor, Indonesia. International Journal of Engineering Research and Advanced Technology, 6(7), 27–36. https://doi.org/10.31695/ijerat.2020.3620
Higgnet, S., & Mcatamney, L. (2000). Technical Note, Rapid Entire Body Assessment. Applied Ergonomics, 31, 201–205.
Lubis, Z. I., Yulianti, A., Nisa, F. K., & Ajeng, S. (2021). Hubungan Resiko Posisi Kerja Duduk Terhadap Keluhan Musculoskeletal Disorders ( MSD ) Pada Pegawai Pemerintah Kabupaten Malang. Jurnal Ergonomi Indonesia, 7, 57–65.
Nurmianto, E. (2004). Ergonomi : Konsep Dasar dan Aplikasinya. ITS.
OHSCO. (2008). Musculoskeletal Disorders Prevention Guideline. OHSCO.
Pratiwi, Indah, Aprillia, L., & Zulfa, C. (2014). Evaluasi Postur Kerja Pengrajin Gerabah Menggunakan RULA dan REBA.
Purnama, P. Z., Budiharti, N., & Priyasmanu, T. (2020). Rancang Bangun Mesin Oven Kopi Dengan Prinsip Qfd Dan Ergonomi. Jurnal Mahasiswa Teknik Industri, 3(2), 25–31.
Restuputri, D. P. (2017). Metode REBA Untuk Pencegahan Musculoskeletal Disorder Tenaga Kerja. Jurnal Teknik Industri, 18(1), 19–28. https://doi.org/https://doi.org/10.22219/JTIUMM
Stanton, Neville, & et al. (2005). Handbook of Human Factors and Ergonomic Methods. CRC Press.
Susihono, W., & Prasetyo, W. (2012). Perbaikan postur kerja untuk mengurangi keluhan muskuloskeletal dengan pendekatan metode Owas (studi kasus di UD. Rizki Ragil Jaya – Kota Cilegon). Spektrum Industri: Jurnal Ilmiah Pengetahuan Dan Penerapan Teknik Industri, 10(1), 69–81. http://journal.uad.ac.id/index.php/Spektrum/article/view/1622
Tarwaka, et al. (2014). Ergonomi Untuk Kesehatan dan Keselamatan.
Tjahayuningtyas, A. (2019). Faktor Yang Mempengaruhi Keluhan Musculoskeletal Disorders (MSDs) Pada Pekerja Informal. The Indonesian Journal of Occupational Safety and Health, 8.
Wijaya, I. S. A., & Muhsin, A. (2018). Analisa Postur Kerja Dengan Metode Rapid Upper Limb Assessment (Rula) Pada Oparator Mesin Extruder Di Stasiun Kerja Extruding Pada Pt Xyz. Opsi, 11–49.
Wijaya, W., Samsir, S., & Paramitha, A. (2018). Analisis Penilaian Tingkat Resiko Ergonomi Terhadap Kenyamanan Pekerja Pada PT. Wahana Barametal Pekanbaru. JOM FEB, 1(1), 1–11.
Downloads
Published
How to Cite
Issue
Section
License
The copyright to this article is transferred to Universitas Mercu Buana (UMB) if and when the article is accepted for publication. The undersigned hereby transfers any and all rights in and to the paper including without limitation all copyrights to UMB. The undersigned hereby represents and warrants that the paper is original and that he/she is the author of the paper, except for material that is clearly identified as to its original source, with permission notices from the copyright owners where required. The undersigned represents that he/she has the power and authority to make and execute this assignment.
We declare that:
1. This paper has not been published in the same form elsewhere.
2. It will not be submitted anywhere else for publication prior to acceptance/rejection by this Journal.
3. A copyright permission is obtained for materials published elsewhere and which require this permission for reproduction.
Furthermore, I/We hereby transfer the unlimited rights of publication of the above mentioned paper in whole to UMB. The copyright transfer covers the exclusive right to reproduce and distribute the article, including reprints, translations, photographic reproductions, microform, electronic form (offline, online) or any other reproductions of similar nature.
The corresponding author signs for and accepts responsibility for releasing this material on behalf of any and all co-authors. This agreement is to be signed by at least one of the authors who have obtained the assent of the co-author(s) where applicable. After submission of this agreement signed by the corresponding author, changes of authorship or in the order of the authors listed will not be accepted.
Retained Rights/Terms and Conditions
1. Authors retain all proprietary rights in any process, procedure, or article of manufacture described in the Work.
2. Authors may reproduce or authorize others to reproduce the Work or derivative works for the authors personal use or for company use, provided that the source and the UMB copyright notice are indicated, the copies are not used in any way that implies UMB endorsement of a product or service of any employer, and the copies themselves are not offered for sale.
3. Although authors are permitted to re-use all or portions of the Work in other works, this does not include granting third-party requests for reprinting, republishing, or other types of re-use.
