Development of Concealer X Packaging Using Kansei Engineering
DOI:
https://doi.org/10.22441/ijiem.v6i3.30961Kata Kunci:
Kansei engineering, PCA, Design concept, Packaging, ConcealerAbstrak
Concealer x packaging still has shortcomings in its packaging from the applicator which makes it difficult to use, the packaging design is uncomfortable for consumers, and the visual design is less informative. This is a challenge in developing concealer x packaging by considering consumer preferences. The purpose of this study is to identify the concept and elements of packaging design according to consumer preferences. Kansei Engineering is one of the methods used to optimize the identification of consumer preferences. This method can capture consumer emotions in the form of Kansei words which are translated into concepts and elements of packaging design. Other supporting methods used are Principal Component Analysis (PCA) and Quantification Theory Type 1 (QTT1). The results obtained were 61 selected samples and 35 Kansei words. The samples and Kansei words were then evaluated by creating a semantic differential questionnaire for 30 respondents by purpose judgment sampling. The results of the concept obtained by the PCA method were 4 PCs with PC 2 selected as the practical standard because it had the highest R-square value of 0.911. The results of the packaging design elements obtained are X1.1 Strew X2.9 Concave X3.6 Jug X4.3 Half Tube X5.4 Heptagon X6.2 Brush and Sponge X7.5 Silicon X8.1 Fun X9.1 Small 1 - 5 gr X10.1 Under. The conclusion of the packaging design obtained has described practical packaging following the design concept and meets consumer preferences.Unduhan
Referensi
Abdullah, F., Wardoyo, B. T., & Adnan, A. M. (2021). Batik Packaging Design for Creative Industry and Sustainability. 519(Icade 2020), 57–60. https://doi.org/10.2991/assehr.k.210203.012
Andrade, C. (2021). The Inconvenient Truth About Convenience and Purposive Samples. Indian Journal of Psychological Medicine, 43(1), 86–88. https://doi.org/10.1177/0253717620977000
Aprilia, I. R., Sari, N. P., Faizi, I., & Wati, R. (2023). Penerapan Metode PCA dalam Penentuan Konsep Desain Kemasan Sekunder untuk Produk X. Performa: Media Ilmiah Teknik Industri, 22(2), 136. https://doi.org/10.20961/performa.22.2.80739
Arini, R. W., Wahyuni, R. S., Munikhah, I. A. T., Ramadhani, A. Y., & Pratama, A. Y. (2023). Perancangan Desain Kemasan Makanan Khas Daerah Keripik Tike Menggunakan Pendekatan Metode Kansei Engineering dan Model Kano. Jurnal INTECH Teknik Industri Universitas Serang Raya, 9(1), 42–52. https://doi.org/10.30656/intech.v9i1.5541
Ariyanti, F. D., & Chan, S. (2020). Kansei engineering, MANOVA and quality function deployment to design bottle packaging and seasoning quality. IOP Conference Series: Earth and Environmental Science, 426(1), 0–8. https://doi.org/10.1088/1755-1315/426/1/012113
Campbell, S., Greenwood, M., Prior, S., Shearer, T., Walkem, K., Young, S., Bywaters, D., & Walker, K. (2020). Purposive sampling: complex or simple? Research case examples. Journal of Research in Nursing, 25(8), 652–661. https://doi.org/10.1177/1744987120927206
Delfitriani, D., & Uzwatania, ; Diki; Fina. (2022). Pengembangan Konsep Desain Kemasan Produk Handsanitizer dengan Pendekatan Kansei Engineering. 8, 13–20. https://ojs.unida.ac.id/Agrohalal/article/view/4916
Dermawan, D., Qurthuby, M., Denur, D., & Ali Ardi, H. (2023). Redesign Kemasan Keripik Singkong Menggunakan Kansei Engineering. Jurnal Teknik Industri Terintegrasi, 6(1), 14–26. https://doi.org/10.31004/jutin.v6i1.14071
Engelberth, R. A. (2023). Re-Design Kemasan Produk Keripik Tempe Dengan Menggunakan Metode Kansei Engineering. Jurnal Rekayasa Industri (JRI), 5(1), 35–42. https://doi.org/10.37631/jri.v5i1.838
Faturrohmah, S. A., Utami, S. R., and Ansoriyah, S. (2024). Makna Kontekstual Diksi Iklan di Tiktok dan Implikasinya Terhadap Memaknai Informasi Teks Iklan SMP. Literasi, 8(2), 273-287. http://dx.doi.org/10.25157/literasi.v8i2.15492
Guo, F., Qu, Q. X., Nagamachi, M., & Duffy, V. G. (2020). A proposal of the event-related potential method to effectively identify kansei words for assessing product design features in kansei engineering research. International Journal of Industrial Ergonomics, 76(December 2019), 102940. https://doi.org/10.1016/j.ergon.2020.102940
Hidayat, H. H., & Wijayanti, N. (2021). Product Development Model for Tempe Chocolate Chips Based on Costumer Preferences in Banjarnegara, Central Java, Indonesia. Industria: Jurnal Teknologi Dan Manajemen Agroindustri, 10(1), 25–32. https://doi.org/10.21776/ub.industria.2021.010.01.3
Hu, Y., & Yan, K. (2023). Convolutional Neural Network Models Combined with Kansei Engineering in Product Design. Computational Intelligence and Neuroscience, 2023(1). https://doi.org/10.1155/2023/2572071
Lestari Pratiwi, S., Andrispa, B., Prasetya, D., Studi Desain Komunikasi Visual, P., Teknologi dan Bisnis Palcomtech, I., & Kunci, K. (2023). 2 nd Mdp Student Conference (Msc) 2023 Perancangan Desain Kemasan Kue Suri Makanan Khas Palembang. 587–592.
Lie, S., & Erlyana, Y. (2024). Pengembangan produk makanan lokal khas Wonogiri dalam bentuk identitas produk. SELAPARANG: Jurnal Pengabdian Masyarakat Berkemajuan, 8(September), 2175–2187.
Maleki, S., Amiri Aghdaie, S. F., Shahin, A., & Ansari, A. (2020). Investigating the relationship among the Kansei-based design of chocolate packaging, consumer perception, and willingness to buy. Journal of Marketing Communications, 26(8), 836–855. https://doi.org/10.1080/13527266.2019.1590855
Mitsuo. N, S. I. (2022). Research Methods of Product Perceptual Image Recognition in Kansei Engineering. https://books.google.com/books?hl=id&lr=&id=lNyVEAAAQBAJ&oi=fnd&pg=PA79&dq=N.+Nagamachi,+%22Kansei+Engineering+&ots=G6a4wapT8R&sig=RBpAlgbrR7QRCiwEz2eXA7RJpp4
Mujahidin, A., & Khoirianingrum, I. (2019). Analisis Segmentasi, Targeting, Positioning (STP) pada Zakiyya House Bojonegoro. Prosiding Seminar Nasional Unimus, 2, 284–294.
Muryan Awaludin, Hari Mantik, F. F. (2022). Penerapan Metode Servqual Pada Skala Likert Untuk Mendapatkan Kualitas Pelayanan Kepuasan Pelanggan. Jurnal Sistem Informasi Universitas Suryadarma, 10(1). https://doi.org/10.35968/jsi.v10i1.990
Puspasari, R. A., Amelia, C., Pangestu, B. P., & Sari, N. P. (2023). Perancangan Konsep Desain Kemasan Makanan Kucing Menggunakan Metode Kansei Engineering. Performa: Media Ilmiah Teknik Industri, 22(2), 143. https://doi.org/10.20961/performa.22.2.80744
Putri, R. D. (2020). Pengaruh Pembiayaan Murabahah Dan Musyarakah Terhadap Profitabilitas Bank Umum Syariah Periode 2016-2018. Jurnal Tabarru’: Islamic Banking and Finance, 3(1), 48–56. https://doi.org/10.25299/jtb.2020.vol3(1).5310
Purwoko, S., & Haryana, A. (2021). Pengaruh Kemasan, Kualitas Dan Harga Produk Susu Terhadap Kepuasan Dan Loyalitas Pelanggan PT. Dwimitra Usaha Global. Jurnal Administrasi Dan Manajemen, 10(2), 117–126. https://doi.org/10.52643/jam.v10i2.1130
Rachmadita Dwi Pramesti, & Susilawati. (2021). Analisis Fitur dan Elemen Desain Kemasan Bakpia Kenes Terhadap Persepsi Konsumen. Wahana, 73(2), 74–87. https://doi.org/10.36456/wahana.v73i2.4731
Rindi Salsabilla, C. I. (2023). 17 Brand Pemenang Female Daily Best of Beauty Awards 2023. https://www.cnbcindonesia.com/lifestyle/20231214170413-33-497460/17-brand-pemenang-female-daily-best-of-beauty-awards-2023
Sari, N. P. (2019). Perencanaan dan Pengembangan Kemasan (PNJ Press).
Sari, N. P., Akkili, V. A., & Muryeti, M. (2024). Penerapan jaringan syaraf tiruan untuk menentukan elemen desain kemasan Numany rempeyek berbasis kansei engineering. Agrointek, 18(3), 742–752. https://doi.org/10.21107/agrointek.v18i3.21790
Sari, N. P., Rizwan, R., Hafidah, E., & Andriyani, S. Z. P. (2023). Perancangan Desain Kemasan Bakso Goreng (Basreng) dengan Metode Kansei Engineering. Performa: Media Ilmiah Teknik Industri, 22(2), 109. https://doi.org/10.20961/performa.22.2.80674
Sari, N. P., Zulkarnain, Z., Muzaki, V. A., & Meilani, Y. D. (2024). Implementasi kansei engineering dalam pengembangan kemasan minuman kopi ready to drink. Agrointek, 18(1), 200–209. https://doi.org/10.21107/agrointek.v18i1.12443
Sutrisna Bhayukusuma, T., & Hadiana, A. (2021). Ekstraksi TF-IDF untuk Kansei Word dalam Perancangan Interface E-Kinerja. Journal of Information Technology, 3(1), 5–16. https://doi.org/10.47292/joint.v3i1.44
Vilano, N., & Budi, S. (2020). Penerapan Kansei Engineering dalam Perbandingan Desain Aplikasi Mobile Marketplace di Indonesia. Jurnal Teknik Informatika Dan Sistem Informasi, 6(2), 354–364. https://doi.org/10.28932/jutisi.v6i2.2705
Wang, I. C., Jiang, Y. R., Wang, Y. W., & Li, C. Y. (2024). Exploring the Multisensory Attractiveness of Cosmetic Packaging: A Study of Visual and Tactile Design Elements and Attractiveness Factors. Sustainability (Switzerland) , 16(13). https://doi.org/10.3390/su16135716
Wu, M. Y., & Chen, Y. H. (2022). Factors affecting consumers’ cognition of food photos using Kansei engineering. Food Science and Technology (Brazil), 42, 1–9. https://doi.org/10.1590/fst.38921
Yu, S. R., & Chen, H. J. (2020). The Kansei Images of Blister Packaging Through Tactile Perception. In Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics): Vol. 12423 LNCS (Issue 1). Springer International Publishing. https://doi.org/10.1007/978-3-030-60114-0_38
Zhang, B. Y., Ma, M. Y., & Chang, X. Q. (2022). Discuss Charm Factors of Mobile MOBA Games with Miryoku Engineering. 2022 8th International Conference on Control, Automation and Robotics, ICCAR 2022, 431–435. https://doi.org/10.1109/ICCAR55106.2022.9782655
Unduhan
Diterbitkan
Cara Mengutip
Terbitan
Bagian
Lisensi
The copyright to this article is transferred to Universitas Mercu Buana (UMB) if and when the article is accepted for publication. The undersigned hereby transfers any and all rights in and to the paper including without limitation all copyrights to UMB. The undersigned hereby represents and warrants that the paper is original and that he/she is the author of the paper, except for material that is clearly identified as to its original source, with permission notices from the copyright owners where required. The undersigned represents that he/she has the power and authority to make and execute this assignment.
We declare that:
1. This paper has not been published in the same form elsewhere.
2. It will not be submitted anywhere else for publication prior to acceptance/rejection by this Journal.
3. A copyright permission is obtained for materials published elsewhere and which require this permission for reproduction.
Furthermore, I/We hereby transfer the unlimited rights of publication of the above mentioned paper in whole to UMB. The copyright transfer covers the exclusive right to reproduce and distribute the article, including reprints, translations, photographic reproductions, microform, electronic form (offline, online) or any other reproductions of similar nature.
The corresponding author signs for and accepts responsibility for releasing this material on behalf of any and all co-authors. This agreement is to be signed by at least one of the authors who have obtained the assent of the co-author(s) where applicable. After submission of this agreement signed by the corresponding author, changes of authorship or in the order of the authors listed will not be accepted.
Retained Rights/Terms and Conditions
1. Authors retain all proprietary rights in any process, procedure, or article of manufacture described in the Work.
2. Authors may reproduce or authorize others to reproduce the Work or derivative works for the authors personal use or for company use, provided that the source and the UMB copyright notice are indicated, the copies are not used in any way that implies UMB endorsement of a product or service of any employer, and the copies themselves are not offered for sale.
3. Although authors are permitted to re-use all or portions of the Work in other works, this does not include granting third-party requests for reprinting, republishing, or other types of re-use.
