Analysis of Risk Management Implementation in the Cleaning Process of Coffee Roasting Machines at Manufacturing Industry Using Risk Identification and Matrix Approach
DOI:
https://doi.org/10.22441/ijiem.v6i3.32805Keywords:
Risk management, Risk assessment, Occupational safety, Coffee roasting machine, ISO 31000, 2018Abstract
This study aims to identify and analyze occupational safety risks during the cleaning process of large-capacity coffee roasting machines at manufacturing industry. The method used is quantitative descriptive analysis with a risk assessment approach, using the SNI ISO 31000:2018 standard. Data were collected through interviews, direct observation, and literature studies. The results of the study indicate that the main risks include slipping, falling from a height, contact with sharp or hot objects, physical fatigue, and the risk of electrical contact. The risks with the highest severity are falling from a height and electrical contact, which are exacerbated by the lack of occupational safety facilities such as signs and personal protective equipment (PPE). Through a risk matrix and fishbone analysis, a mitigation strategy was designed in the form of installing safety facilities, implementing standard operational procedures, occupational health and safety (OHS) training, and routine inspections. The implementation of these steps is expected to create a safer work environment, increase efficiency, and support operational sustainability at manufacturing industry.Downloads
References
Acebes, F., González-Varona, J. M., López-Paredes, A., & Pajares, J. (2024). Beyond probability-impact matrices in project risk management: A quantitative methodology for risk prioritisation. Humanities and Social Sciences Communications, 11(1), 1–13.
Aisyah, S., Nugroho, B. H., Tampubolon, S., Jaqin, C., & Sumasto, F. (2023). A Design of Supply Chain Risk Management for Cocoa Based Agroindustry at South Sulawesi to Balance Risk. IJIEM - Indonesian Journal of Industrial Engineering and Management, 4(3), 516. https://doi.org/10.22441/ijiem.v4i3.21293
Andry, J. F., Christianto, K., Purnomo, Y., & Lee, F. S. (2024). Risk Analysis of Business Continuity Plan in Light Steel Company Using ISO 31000 Framework. Journal of Information Systems and Informatics, 6(4), 3104–3114.
Arviana, D., & Suseno. (2024). Optimalisasi Produktivitas dan Manajemen Risiko pada Sistem Produksi Aleta Leather Menggunakan Metode House of Risk. Jurnal Teknologi Dan Manajemen Industri Terapan, 3(2), 160–170. https://doi.org/10.55826/jtmit.v3i2.354
Basri, E. I., Razak, I. H. A., Ab-Samat, H., & Kamaruddin, S. (2017). Preventive maintenance (PM) planning: a review. Journal of Quality in Maintenance Engineering, 23(2), 114–143.
Coccia, M. (2020). Fishbone diagram for technological analysis and foresight. International Journal of Foresight and Innovation Policy, 14(2–4), 225–247.
Cristina, C., Cindy, C., Ng, D., Andelson, J., & Wang, T. (2024). Analisis Penerapan Manajemen Risiko Bisnis Pada Biscotti Cakery& Coffee. J-MACC: Journal of Management and Accounting, 7(1), 105–114.
Dea Artha Melati, Ekowati Retnaningtyas, & Diniyah Kholidah. (2024). Analisis Tingkat Pengetahuan Keselamatan dan Kesehatan Kerja (K3) Mengenai Lockout/Tagout (LOTO) terhadap Tindakan Tidak Aman (Unsafe Action) dalam Lockout/Tagout (LOTO) Pekerja Divisi Manufactur dan Divisi Enggenering pada PT. X Kabupaten Banyuwangi. Detector: Jurnal Inovasi Riset Ilmu Kesehatan, 2(3), 99–108. https://doi.org/10.55606/detector.v2i3.4149
Dodoo, J. E., & Al-Samarraie, H. (2021). A systematic review of factors leading to occupational injuries and fatalities. Journal of Public Health, 1–15.
Fan, Y., & Stevenson, M. (2018). A review of supply chain risk management: definition, theory, and research agenda. International Journal of Physical Distribution & Logistics Management, 48(3), 205–230. https://doi.org/10.1108/IJPDLM-01-2017-0043
Fazura Aghnina., S. (2023). Menganalisis Faktor-Faktor Yang Berhubungan Dengan Kecelakaan Kerja Terpeleset, Tersandung, Dan Jatuh Dengan Penerapan Metode Penambangan Data Ke Basis Data Statistik Kecelakaan Dan Penyakit Akibat Kerja Di Pertambangan. Journal of Health and Medical Research, 3(2), 246–255.
Giovanni, A., Fathimahhayati, L. D., & Pawitra, T. A. (2023). Risk Analysis of Occupational Health and Safety Using Hazard Identification, Risk Assessment and Risk Control (HIRARC) Method (Case Study in PT Barokah Galangan Perkasa). IJIEM - Indonesian Journal of Industrial Engineering and Management, 4(2), 198. https://doi.org/10.22441/ijiem.v4i2.20398
Holah, J., Lelieveld, H. L. M., & Gabric, D. (2020). Handbook of hygiene control in the food industry. Woodhead Publishing.
Judijanto, L., Sudarmanto, E., & Zulfikri, A. (2024). Analisis tentang Efek Manajemen Risiko, Struktur Modal, dan Inovasi Produk terhadap Profitabilitas di Industri Manufaktur Jawa Barat. Jurnal Multidisiplin West Science, 3(06), 785–797. https://doi.org/10.58812/jmws.v3i06.1322
Maharani, A. I., Aziza, A. H., Lubis, A. F., & Zaharani, Y. T. (2024). Manajemen risiko industri minyak bumi dan gas pada proses industri dan manajemen risiko. Environment Conflict, 1(1), 32–41. https://doi.org/10.61511/environc.v1i1.2024.525
Mahmood, S. U., Crimbly, F., Khan, S., Choudry, E., & Mehwish, S. (2020). Strategies for rational use of personal protective equipment (PPE) among healthcare providers during the COVID-19 crisis. Cureus, 12(5).
Muhammad Asir, Yuniawati, R. A., Mere, K., Sukardi, K., & Anwar, M. A. (2023). Peran manajemen risiko dalam meningkatkan kinerja perusahaan: studi manajemen sumber daya manusia. Entrepreneurship Bisnis Manajemen Akuntansi (E-BISMA), 4(1), 32–42. https://doi.org/10.37631/ebisma.v4i1.844
Nurwahidah, A., & Nur, A. (2025). Identifikasi dan Mitigasi Risiko Rantai Pasok Produk menggunakan Metode House of Risk (HOR) pada IKM Makanan. ARIKA, 19(1), 1–9.
Prata, E. R. B. de A., Chaves, J. B. P., Gomes, S. G. S., & Passos, F. J. V. (2021). Statistical quality control in the food industry: a risk-based approach. International Journal of Quality & Reliability Management, 38(2), 437–452.
Pujianahum, N. F., Soesanto, E., Nuraini, V. M., & Dwianing, Y. N. (2024). IJM : Indonesian Journal of Multidisciplinary. 2, 256–263.
Rahmadanis, R., Novita, R., Wati, R. Z., & Mardiana, R. (2023). Efektivitas Penerapan Manajemen Risiko Pada PT. Indofood Sukses Makmur. Magisma: Jurnal Ilmiah Ekonomi Dan Bisnis, 11(2), 163–171. https://doi.org/10.35829/magisma.v11i2.323
Ririh, K. R. (2021). Analisis Risiko Kecelakaan Kerja Menggunakan Metode HIRARC dan Diagram Fishbone pada Lantai Produksi PT DRA Component Persada. Go-Integratif : Jurnal Teknik Sistem Dan Industri, 2(2), 135–152. https://doi.org/10.35261/gijtsi.v2i2.5658
Sitanggang, P. A., & Sitanggang, F. A. (2022). Analisis Implementasi Manajemen Risiko Berdasarkan SNI ISO 31000:2018 (Studi Kasus: Sparepart Personal Computer Second Jambi). Eksis: Jurnal Ilmiah Ekonomi Dan Bisnis, 13(1), 12. https://doi.org/10.33087/eksis.v13i1.293
Tilc, G., & Sari, B. (2023). Identifikasi Bahaya, Penilaian Risiko dan Penentuan Pengendalian Pada Operasi: Systematic Literature Review Hazard Identification , Risk Assessment and Risk Control in Mining Operation : Systematic Literature Review Magister Terapan Keselam. 446–460.
Wakhyudi, T., Sayuti, M., & Karnadi, K. (2024). Analisis Mitigasi Risiko Kecelakaan Kerja Divisi AC pada Perusahaan Elektronik di Karawang dengan Menerapkan Metode HOR dan ISM. Journal of Integrated System, 7(1), 83–97. https://doi.org/10.28932/jis.v7i1.9154
Wijaya, C. E., Ahmad, & Doaly, C. O. (2022). Analisis Manajemen Risiko Pada Aktivitas Supply Chain Perusahaan Baja di Indonesia Menggunakan Metode House of Risk. Jurnal Mitra Teknik Industri, 1(3), 250–259. https://doi.org/10.24912/jmti.v1i3.23501
Downloads
Published
How to Cite
Issue
Section
License
The copyright to this article is transferred to Universitas Mercu Buana (UMB) if and when the article is accepted for publication. The undersigned hereby transfers any and all rights in and to the paper including without limitation all copyrights to UMB. The undersigned hereby represents and warrants that the paper is original and that he/she is the author of the paper, except for material that is clearly identified as to its original source, with permission notices from the copyright owners where required. The undersigned represents that he/she has the power and authority to make and execute this assignment.
We declare that:
1. This paper has not been published in the same form elsewhere.
2. It will not be submitted anywhere else for publication prior to acceptance/rejection by this Journal.
3. A copyright permission is obtained for materials published elsewhere and which require this permission for reproduction.
Furthermore, I/We hereby transfer the unlimited rights of publication of the above mentioned paper in whole to UMB. The copyright transfer covers the exclusive right to reproduce and distribute the article, including reprints, translations, photographic reproductions, microform, electronic form (offline, online) or any other reproductions of similar nature.
The corresponding author signs for and accepts responsibility for releasing this material on behalf of any and all co-authors. This agreement is to be signed by at least one of the authors who have obtained the assent of the co-author(s) where applicable. After submission of this agreement signed by the corresponding author, changes of authorship or in the order of the authors listed will not be accepted.
Retained Rights/Terms and Conditions
1. Authors retain all proprietary rights in any process, procedure, or article of manufacture described in the Work.
2. Authors may reproduce or authorize others to reproduce the Work or derivative works for the authors personal use or for company use, provided that the source and the UMB copyright notice are indicated, the copies are not used in any way that implies UMB endorsement of a product or service of any employer, and the copies themselves are not offered for sale.
3. Although authors are permitted to re-use all or portions of the Work in other works, this does not include granting third-party requests for reprinting, republishing, or other types of re-use.
