EFFECT OF ANNEALING ON MAGNETIC AND STRUCTURAL PROPERTIES OF THE NANOCRYSTALLINE Fe-Mn-Al ALLOYS
DOI:
https://doi.org/10.22441/ijimeam.v2i1.18953Kata Kunci:
Fe55Mn10Al35 nanocrystalline alloys, Annealing process, Magnetic and structures propertiesAbstrak
In this work, the formations of Fe55Mn10Al35 nanocrystalline alloys were made by using mechanical alloying (MA) technique with the milling time of 24 hrs and then annealed at 300, 500, and 700oC. The sizes and the morphology of the particles were checked by using a Scanning Electron Microscope (SEM). The magnetic properties were characterized by using a Vibration Sample Magnetometer (VSM), and it give results both of the magnetic saturation (Ms) and Coercivity (Hc) are decreased respect to annealing temperatures. Last one; the structures were characterized by using an Extended X-ray Absorption Fine Structure (EXAFS) and X-Ray Diffraction (XRD). It give results that the structures were single phase at 24 hrs milled and 300oC annealed, then the structure to be changed at 500 and 700oC.Unduhan
Referensi
Heiko Bremers, Michael Fricke, and Jurgen Hesse, Structure and magnetic properties of FeMnAl alloys investigated by Mossbauer spectroscopy and X-ray diffraction, Hyperfine Interactions 94 (1994) 1855-1859.
M. M. Rico, Liga E. Zamaro, G. A. Peres Alcazar, J. M. Gonzalez, and A. Hernando Jr., phys. Stat. sol. (b) 220, 445 (2000).
F. Offi, W. Kuch, and J. Kirschner, “Structural and magnetic properties of Fe Mn thin films on Cu(001) and on Co/Cu(001),” Phys. Rev.B, vol. 66, pp. 064419-1–064419-10, Aug. 2002.
V. Sebastian, N. Lakshmi, and K. Venugopalan, “Correlation between microstructure and magnetic properties in mechanically alloyed nanogranular Fe Al ,” Mater. Lett., vol. 66, pp. 4635–4638, Mar. 2007.
K. Tarigan, D. S. Yang, and S. C. Yu, Local Structure and Magnetic Properties of FeMnAl Nanocrystalline and Amorphous Alloys, Advanced Materials Research Vol. 277 (2011) pp 100-105
Michael E. McHenry, Matthew A. Willard, David E. Laughlin, Amorphous and nanocrystalline materials for applications as soft magnets, Progress in Materials Science 44 (1999) 291-433.
Abdul Samee Flaws Abdul Aziz, Variation of lattice parameter, average grain size, dielectric constant and saturation magnetization with different temperature for 0.30Ni0.7Zn0.3Fe2O4+ 0.70 PLZT composite by Co-precipitation method, Diyala Jorunal For Pure Sciences, Vol: 8 No: 3, July 2012 .
D. S. Yang, et al., EXAFS Study for a Magnetic Shape Memory Alloy Ni-Mn-Ga, Journal of the Korean Physical Society, Vol. 50, No. 4, April 2007, pp. 1062∼1067
Unduhan
Diterbitkan
Cara Mengutip
Terbitan
Bagian
Lisensi
Authors who publish in IJIMEAM retain the following rights:- Author retains the copyright and grants the journal the right of first publication of the work simultaneously licensed under the Creative Commons Attribution-ShareAlike 4.0 License that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal.
- Author is able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book) with the acknowledgment of its initial publication in this journal.
- Author is permitted and encouraged to post his/her work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of the published work (See What is Open Access).
Read more about the Creative Commons Attribution-ShareAlike 4.0 Licence here: https://creativecommons.org/licenses/by-sa/4.0/.
