Analisa Studi Kelayakan Pembangunan PLTS 10 kWp di Graha YPK PLN
DOI:
https://doi.org/10.22441/jte.2022.v13i3.006Keywords:
PLTS studi kelayakan investasi feasibility studyAbstract
Perencanaan PLTS di Graha YPK PLN dibutuhkan sebagai sistem back-up atau pengganti untuk mengurangi penggunaan listrik konvensional. Sistem On Grid merupakan sistem Pembangkit Listrik Tenaga Surya yang tidak terhubung dengan jaringan listrik PLN. Sistem On Grid ini disebut juga dengan sistem pembantu dikarenakan PLTS masih membutuhkan supply dari PLN dengan menggunakan modul surya sebagai penghasil energi listrik sesuai dengan kebutuhan yang diperlukan. Perencanaan Pembangkit Listrik Tenaga Surya 52 m2 sistem On Grid dengan komponen PLTS berupa 24 modul dipasang dengan panel surya 450 Wp, 1 buah Inverter berkapasitas 15330 Watt, Radiasi matahari untuk tahun 2021 rata-rata yaitu 4,67. Biaya energi PLTS Graha YPK PLN 52 m2 adalah Rp. 1.444,70/kWh dengan impor sebesar 9.240.4 kWh/Bulan dan eksport sebesar 1380,61 kWh/Bulan. Dengan perhitungan ekonomi, total biaya investasi pada perencanaan ini sebesar Rp. 257.105.000 dengan waktu pengembalian investasi selama 16 tahun.
Downloads
References
H. Sirait, “Sistem Pelacak Sinar Matahari Dalam Pengisian Daya Listrik Pada Accu Menggunaan Solar Panel,” Proceeding Seminar Nasional APTIKOM 2016, vol. 1, no. 1, pp. 347–359, Oct. 2016.
J. Windarta, E. W. Sinuraya, A. Z. Abidin, A. E. Setyawan, and A. Kusuma, “Penerapan Teknologi Pembangkit Listrik Tenaga Surya (PLTS) di SMA Negeri 6 Surakarta sebagai Sekolah Hemat Energi dan Ramah Lingkungan,” Prosiding : Konferensi Nasional Matematika dan IPA Universitas PGRI Banyuwangi, vol. 1, no. 1, pp. 215–227, 2019.
S. Samsurizal, C. Christiono, and H. Husada, “Studi Kelayakan Pemanfaatan Energi Matahari Sebagai Pembangkit Listrik Tenaga Surya Di Dusun Toalang,” Setrum : Sistem Kendali-Tenaga-elektronika-telekomunikasi-komputer, vol. 9, no. 1, p. 75, Jun. 2020, doi: 10.36055/setrum.v9i1.7494.
S.G. Ramadhan and C. Rangkuti, “Perencanaan Pembangkit Listrik Tenaga Surya Di Atap Gedung Harry Hartanto Universitas Trisakti,” Prosiding Seminar Nasional Cendekiawan, pp. 22.1–22.11, 2016, doi: 10.25105/semnas.v0i0.905.
P. A. K. Ray, R. S. Wibowo, and F. A. Pamuji, “Studi Kelayakan Pemasangan PLTS 80 KW Pada Sistem Kelistrikan PT. Indonesia Kendaraan Terminal,” Jurnal Teknik ITS, vol. 10, no. 1, Aug. 2021, doi: 10.12962/j23373539.v10i1.59320.
R. Hariyati., M. N. Qosim., & A. W. Hasanah, “Konsep Fotovoltaik Terintegrasi On Grid dengan Gedung STT-PLN,” Energi dan Kelistrikan: Jurnal Ilmiah, vol 11, no. 1, 2019.
H. Satria and S. Syafii, “Sistem Monitoring Online dan Analisa Performansi PLTS Rooftop Terhubung ke Grid PLN,” Jurnal Rekayasa Elektrika, vol. 14, no. 2, Aug. 2018, doi: 10.17529/jre.v14i2.11141.
S. Sukmajati and M. Hafidz, “Perancangan dan Analisis Pembangkit Listrik Tenaga Surya Kapasitas 10 Mw On Grid di Yogyakarta,” Energi dan Kelistrikan, vol. 7, no. 1, pp. 49–63, 2015, doi: 10.33322/energi.v7i1.582.
Direktur Jenderal Energi Baru, Terbarukan dan Konservasi Energi, “Panduan Studi Kelayakan Pembangkit Listrik Tenaga Surya Terpusat”, Tetra Tech. ES, Inc, 2019.
B. Winardi, A. Nugroho, and E. Dolphina, “Perencanaan Dan Analisis Ekonomi Pembangkit Listrik Tenaga Surya (PLTS) Terpusat Untuk Desa Mandiri,” Jurnal Tekno, vol. 16, no. 2, pp. 1–11, Oct. 2019, doi: 10.33557/jtekno.v16i1.603.
A. Naufal, “Desain Kapasitas Pembangkit Listrik Tenaga Surya Rooftop Di Gedung C Fakultas Teknik Universitas Mataram,” Repository UNRAM, Unram.ac.id, 2021.
Direktur Jenderal Energi Baru, Terbarukan dan Konservasi Energi, “Panduan Perencanaan Dan Pemanfaatan PLTS Atap Di Indonesia”, Tetra Tech. ES, Inc, 2020.
Downloads
Published
How to Cite
Issue
Section
License
The copyright to this article is transferred to Universitas Mercu Buana (UMB) if and when the article is accepted for publication. The undersigned hereby transfers any and all rights in and to the paper including without limitation all copyrights to UMB. The undersigned hereby represents and warrants that the paper is original and that he/she is the author of the paper, except for material that is clearly identified as to its original source, with permission notices from the copyright owners where required. The undersigned represents that he/she has the power and authority to make and execute this assignment.
We declare that:
1. This paper has not been published in the same form elsewhere.
2. It will not be submitted anywhere else for publication prior to acceptance/rejection by this Journal.
3. A copyright permission is obtained for materials published elsewhere and which require this permission for reproduction.
Furthermore, I/We hereby transfer the unlimited rights of publication of the above mentioned paper in whole to UMB. The copyright transfer covers the exclusive right to reproduce and distribute the article, including reprints, translations, photographic reproductions, microform, electronic form (offline, online) or any other reproductions of similar nature.
The corresponding author signs for and accepts responsibility for releasing this material on behalf of any and all co-authors. This agreement is to be signed by at least one of the authors who have obtained the assent of the co-author(s) where applicable. After submission of this agreement signed by the corresponding author, changes of authorship or in the order of the authors listed will not be accepted.
Retained Rights/Terms and Conditions
1. Authors retain all proprietary rights in any process, procedure, or article of manufacture described in the Work.
2. Authors may reproduce or authorize others to reproduce the Work or derivative works for the authors personal use or for company use, provided that the source and the UMB copyright notice are indicated, the copies are not used in any way that implies UMB endorsement of a product or service of any employer, and the copies themselves are not offered for sale.
3. Although authors are permitted to re-use all or portions of the Work in other works, this does not include granting third-party requests for reprinting, republishing, or other types of re-use.
