Rancang Bangun Sistem Kontrol Dan Monitoring Sistem Pendinginan Dan Penerangan Pada Gedung Perkantoran Berbasis PLC Virtual Machine Experion LXR120
DOI:
https://doi.org/10.22441/jte.2025.v16i1.004Abstract
Perkembangan teknologi pada jaman ini, memungkinkan manusia untuk menciptakan sistem otomasi untuk melakukan pekerjaan dan aktifitas sehari-hari. Mulai dari keamanan rumah tinggal, pengendalian lalu lintas dan manufacturing. Salah satu teknologi yang terus berkembang dan dipergunakan secara luas dibidang pengontrolan adalah Programmable Logic Control (PLC) dan Human Machine Interface (HMI). Pada kehidupan sehari-hari sistem instalasi penerangan listrik sangat memberikan pengaruh penting dalam aktivitas yang dikerjakan manusia. Selain itu Indonesia yang memiliki iklim tropis membutuhkan pendinginan saat musim kemarau yang panjang dan sangat panas. Oleh karena itu, apabila sistem penerangan dan pendinginan dapat bekerja secara modern, akan lebih mempermudah aktifitas yang dilakukan oleh manusia. Maka pada penelitian ini dibuatkah sistem kontrol dan monitoring pada sistem penerangan dan pendinginan di gedung perkantoran. Pada penelitian ini parameter yang dugunakan adalah PLC Honeywell C300, dan HMI. Pembacaan temperature dilakukan dengan cara memasukan nilai temperature secara manual melalui HMI (Human Machine Interface) yang disediakan disetiap tampilan HMI (Human Machine Interface) pada Gedung perkantoran yaitu ada diruang direktur, ruang staff dan ruang satpam. Berdasarkan hasil pengujian dapat disimpulkan bahwa penggunaan PLC dapat digunakan untuk kontrol dan monitoring aktifitas pada Gedung perkantoran. Dimana respon daripada PLC Honeywell C300 memiliki respon yang cepat untuk melakukan kontrol pada output/aktuator melalui HMI yaitu kurang dari 1 detik. Tentu dengan respon terhadap perintah yang cepat dapat mengefisiensikan waktu disetiap aktifitas gedung perkantoran.
Kata Kunci—HMI, Monitoring, PLC LXR120, Sistem Kontrol, Sistem Pendinginan, Sistem PeneranganDownloads
References
D. Yuhendri, “Penggunaan PLC Sebagai Pengontrol Peralatan Building Otomatis”, Fakultas Teknik – Universitas Islam Sumatera Utara, vol. 3, no. 3, 2018.
H. Hamdani, “Aplikasi Smart System pada Gedung Perkantoran dengan Menggunakan PLC FX0S-30MR-ES”, Diss. Universitas Sumatera Utara, 2008.
F. A. Pradana, “Rancang Bangun Pengendali Instalasi Listrik Gedung E6 Ft. Unnes Berbasis Programmable Logic Controller ( PLC )”, Under Graduates thesis, Universitas Negeri Semarang, 2017.
M. Yusuf, and I. D. Sara, “Implementasi Sistem Cerdas Pada Gedung Workshop Otomasi Industri Balai Latihan Kerja Banda Aceh sebagai Solusi dalam Penghematan Energi Listrik”, JNTE, vol. 9, no. 2, pp. 61 –, Jul. 2020.
A. Ananta, J. Irawan, and S. C. Annisa, “LAMPU PINTAR UNTUK FIRE EMERGENCY EVACUATION BERBASIS PLC MITSUBISHI FX 3G”, JuTEkS, vol. 7, no. 1, Apr. 2020.
H. N. Pratiwi, E. Sutisna, and W. H. Mulyadi, “ Sistem Penerangan pada Smart Home Berbasis PLC ”, SNTE, vol. 7, no. 1, pp. 65–68, Dec. 202
Downloads
Published
How to Cite
Issue
Section
License
The copyright to this article is transferred to Universitas Mercu Buana (UMB) if and when the article is accepted for publication. The undersigned hereby transfers any and all rights in and to the paper including without limitation all copyrights to UMB. The undersigned hereby represents and warrants that the paper is original and that he/she is the author of the paper, except for material that is clearly identified as to its original source, with permission notices from the copyright owners where required. The undersigned represents that he/she has the power and authority to make and execute this assignment.
We declare that:
1. This paper has not been published in the same form elsewhere.
2. It will not be submitted anywhere else for publication prior to acceptance/rejection by this Journal.
3. A copyright permission is obtained for materials published elsewhere and which require this permission for reproduction.
Furthermore, I/We hereby transfer the unlimited rights of publication of the above mentioned paper in whole to UMB. The copyright transfer covers the exclusive right to reproduce and distribute the article, including reprints, translations, photographic reproductions, microform, electronic form (offline, online) or any other reproductions of similar nature.
The corresponding author signs for and accepts responsibility for releasing this material on behalf of any and all co-authors. This agreement is to be signed by at least one of the authors who have obtained the assent of the co-author(s) where applicable. After submission of this agreement signed by the corresponding author, changes of authorship or in the order of the authors listed will not be accepted.
Retained Rights/Terms and Conditions
1. Authors retain all proprietary rights in any process, procedure, or article of manufacture described in the Work.
2. Authors may reproduce or authorize others to reproduce the Work or derivative works for the authors personal use or for company use, provided that the source and the UMB copyright notice are indicated, the copies are not used in any way that implies UMB endorsement of a product or service of any employer, and the copies themselves are not offered for sale.
3. Although authors are permitted to re-use all or portions of the Work in other works, this does not include granting third-party requests for reprinting, republishing, or other types of re-use.
