Analisis Pengaruh Kapasitor Bank Pada Jaringan IEEE 34 Dengan Metode Newton Raphson dan Fast Decoupled
DOI:
https://doi.org/10.22441/jte.2025.v16i3.007Keywords:
Kapasitor Bank, Newton Raphson, Fast Decoupled, Jaringan Distribusi, IEEE 34 Node, Kualitas DayaAbstract
Penelitian ini bertujuan untuk menganalisis pengaruh penambahan kapasitor Bank pada jaringan distribusi model IEEE 34 Node dengan menggunakan metode Newton Raphson dan Fast Decoupled. Ada nya peningkatan kebutuhan listrik yang signifikan sering kali menyebabkan penurunan tegangan dan rugi-rugi daya pada sistem distribusi radial. Salah satu solusi efektif untuk mengatasi masalah ini adalah penggunaan kapasitor Bank guna memperbaiki faktor daya dan mengurangi kerugian daya. Metode Newton Raphson dan Fast Decoupled digunakan untuk mengevaluasi aliran daya pada jaringan distribusi radial dengan beban yang sensitif terhadap tegangan.
Penambahan kapasitor Bank terbukti mampu meningkatkan kualitas daya pada jaringan distribusi dengan mengurangi penurunan tegangan rugi-rugi daya dan peningkatan power faktor. Pada penelitian ini pengaruh penggunaan kapasitor Bank dalam jaringan IEEE 34 memiliki dampak terhadap peningkatan nilai power factor, dengan perbandingan nilai rata-rata pada metode Newton Raphson 68.607% menjadi 88.801%, dan nilai rata-rata metode Fast Decoupled 57.041% menjadi 95.485%.
Metode Newton Raphson dan Fast Decoupled sama-sama efektif dalam mengoptimalkan kinerja jaringan distribusi. Namun, metode Fast Decoupled memiliki keunggulan dalam hal kecepatan komputasi, menjadikannya lebih sesuai untuk analisis sistem distribusi yang kompleks. Dengan pilihan metode Fast Decoupled terlihat lebih efisien dengan nilai rata-rata 95.485% untuk sistem yang besar dengan beban yang sebagian besar linier dan stabil. Penelitian ini memberikan kontribusi penting dalam memahami pengaruh kapasitor Bank terhadap kualitas daya pada jaringan distribusi serta memberikan panduan bagi pengelola jaringan listrik untuk meningkatkan efisiensi operasional.
Downloads
References
S. Johan and Ari Mulianta Ginting, “Determinasi Konsumsi Listrik Di Indonesia,” Media Ekon., vol. 30, no. 1, pp. 106–117, 2022, doi: 10.25105/me.v30i1.10662.
Suriadi et al., “Perbaikan Tegangan dengan Menggunakan Kapasitor Bank 25 MVAR pada Gardu Induk Banda Aceh,” J. Eng. Sci., vol. 2, no. 1, pp. 1–12, 2023, doi: 10.56347/jes.v2i1.118.
H. J. Ate et al., “Perbandingan Hasil Iterasi Aliran Daya ( Load Flow ) Menggunakan Metode Newton Raphson dan Metode Fast-Decoupled Dengan Software ETAP”.
S. S. Shrawane et al., “Simulation and Load Flow Analysis of Interconection System,” IEEE Access, vol. 8, no. 1, pp. 114–121, 2018.
U. S. U. penuntun ETAP, “Penuntun Praktikum Etap Laboratorium,” pp. 1–30, 2012, [Online]. Available: https://dte.usu.ac.id/images/IMAGE/Modul_ETAP.pdf
S., Etap, S., Ilyas, I., Apriansyah, B. A., Supriyadi, E., Multi, A., Moh, J., Ii, K., Sawah, S., & Selatan, K. J, " Power, B., Menggunakan Spftware etap 12.6," 46–59, 2019
Luna, L. E., & Parra, E. E, "Methodology for assessing the impacts of distributed generation interconnection. Ingeniería e Investigación, 31(2SUP)", 36–44., 2019 https://doi.org/10.15446/ing.investig.v31n2sup.25209
Ate, H. J., Sumampouw, G., Munir, M., Irawan, H., Dermawan, M. A., Haikal, M., & Utomo, R. M. (n.d.), "Perbandingan Hasil Iterasi Aliran Daya ( Load Flow ) Menggunakan Me Metode Newton Raphson dan Metode Fast-Decoupled Dengan Software ETAP.
Hasibuan, A., Isa, M., Yusoff, M. I., & Rahim, S. R. A, "Analisis Aliran Daya Pada Sistem Tenaga Listrik Dengan Metode Fast Decoupled Menggunakan Software Etap. RELE (Rekayasa Elektrikal Dan Energi)", Jurnal Teknik Elektro, 3(1), 37–45, 2020 https://doi.org/10.30596/rele.v3i1.5236
Johan Verbeke dan Ronald Cools, "The Newton-Raphson Method, International Journal of Mathematical Education in Science and Technology", 1995, 26:2, 177-193
Andi Muhammad Syafi’i, Irfan Pradikatama, Muhammad Ikbal Nur, Rifqi Rizqullah, "Analisis Aliran Daya Dan Hubung Singkat Modifikasi Sistem 30 Bus IEEE Menggunakan Metode Fast Decoupled", PoliGrid Vol. 02 No. 02, Desember 2021
M. Erlangga and others, “Usulan Perencanaan Perawatan Mesin dengan Metode Reliability Centered Maintenance (Rcm) dan Age Replacement pada Mesin Raking Intake (Studi Kasus: Pt. Xyz),” Universitas Islam Indonesia, 2023.
Downloads
Published
How to Cite
Issue
Section
License
The copyright to this article is transferred to Universitas Mercu Buana (UMB) if and when the article is accepted for publication. The undersigned hereby transfers any and all rights in and to the paper including without limitation all copyrights to UMB. The undersigned hereby represents and warrants that the paper is original and that he/she is the author of the paper, except for material that is clearly identified as to its original source, with permission notices from the copyright owners where required. The undersigned represents that he/she has the power and authority to make and execute this assignment.
We declare that:
1. This paper has not been published in the same form elsewhere.
2. It will not be submitted anywhere else for publication prior to acceptance/rejection by this Journal.
3. A copyright permission is obtained for materials published elsewhere and which require this permission for reproduction.
Furthermore, I/We hereby transfer the unlimited rights of publication of the above mentioned paper in whole to UMB. The copyright transfer covers the exclusive right to reproduce and distribute the article, including reprints, translations, photographic reproductions, microform, electronic form (offline, online) or any other reproductions of similar nature.
The corresponding author signs for and accepts responsibility for releasing this material on behalf of any and all co-authors. This agreement is to be signed by at least one of the authors who have obtained the assent of the co-author(s) where applicable. After submission of this agreement signed by the corresponding author, changes of authorship or in the order of the authors listed will not be accepted.
Retained Rights/Terms and Conditions
1. Authors retain all proprietary rights in any process, procedure, or article of manufacture described in the Work.
2. Authors may reproduce or authorize others to reproduce the Work or derivative works for the authors personal use or for company use, provided that the source and the UMB copyright notice are indicated, the copies are not used in any way that implies UMB endorsement of a product or service of any employer, and the copies themselves are not offered for sale.
3. Although authors are permitted to re-use all or portions of the Work in other works, this does not include granting third-party requests for reprinting, republishing, or other types of re-use.
