Perancangan Sistem Kontrol Ketinggian Muka Cairan Pada Tangki Spherical Menggunakan Kontroler PID-Gain Scheduling
DOI:
https://doi.org/10.22441/jte.2025.v16i2.007Keywords:
Gain Scheduling, Kontrol PID, Tangki Spherical, Adaptif, Kontrol level, Non-linearAbstract
Tangki spherical adalah salah satu tangki pressure vessel yang memiliki bentuk yang sangat nonlinear karena bentuk geometrisnya dan tangki ini banyak digunakan pada industri untuk menyimpan cairan dengan kapasitas besar. Tangki spherical ini banyak digunakan karena keunggulannya untuk mendistribusi tegangan yang lebih merata sehingga cenderung tidak memiliki titik lemah, dan juga luas permukaan per satuan volume yang dimiliki lebih kecil membuatnya panas yang ditransferkan dari lingkungan lebih kecil dibandingkan bentuk tangki lainnya. Pengendalian ketinggian muka cairan pada tangki ini menjadi tantangan karena sifat nonlinearnya yang menyebabkan dinamika proses bervariasi secara ekstrem. Penelitian ini mengusulkan metode kontrol PID dengan pendekatan Gain Scheduling (PID-GS) untuk mengatasi tantangan tersebut. Metode ini memungkinkan parameter kontrol beradaptasi dengan melakukan penjadwalan sesuai perubahan kondisi operasi. Simulasi pada penelitian ini menggunakan MATLAB Simulink untuk mengevaluasi performa PID-GS dibandingkan PID konvensional pada berbagai setpoint. Hasil simulasi menunjukkan bahwa PID-GS memiliki rise time lebih cepat, final value lebih akurat, dan overshoot yang lebih kecil dibandingkan PID konvensional. Selain itu, PID-GS memberikan stabilitas sistem yang lebih baik dengan settling time yang lebih singkat. Analisis kesalahan kumulatif menggunakan parameter seperti IAE, ITAE, ITSE, dan ISE menunjukkan bahwa PID-GS unggul pada setpoint rendah hingga menengah. Namun, peningkatan kesalahan kumulatif pada setpoint tinggi menunjukkan perlunya optimasi lebih lanjut terhadap parameter Gain Scheduling. Secara keseluruhan, PID-GS menawarkan solusi kontrol yang efektif dan efisien untuk sistem non-linear seperti tangki spherical, dengan potensi untuk dikembangkan lebih lanjut guna meningkatkan kinerja di seluruh rentang operasiDownloads
References
M. Bharathi, C. Selvakumar, and A. Kalpana, “Model based Controller Design for a Spherical Tank,” IOSR J. Electr. Electron. Eng., vol. 9, no. 2, pp. 74–79, 2014, doi: 10.9790/1676-09267479.
C. Urrea and Y. Garcia-Garcia, “Design and Performance Analysis of Level Control Strategies in a Nonlinear Spherical Tank,” Processes, vol. 11, no. 3, 2023, doi: 10.3390/pr11030720.
R. A. Haryanto, “Perancangan Sistem Kendali Level Air pada Deaerator Menggunakan Kendali PID Studi Kasus PLTU 2x110 MW Teluk Balikpapan,” Simetris, pp. 1–23, 2020.
C. Urrea and F. Páez, “Design and comparison of strategies for level control in a nonlinear tank,” Processes, vol. 9, no. 5, 2021, doi: 10.3390/pr9050735.
D. Anjar Nyawa, A. Trimulyono, and H. Yudo, “Analisis Kekuatan Spherical Vessel Tank 42-T-404 G PT. Pertamina dengan Variasi Ketebalan dari Grade Material,” J. Tek. Perkapalan, vol. 11, no. 4, pp. 48–58, 2023, [Online]. Available: https://ejournal3.undip.ac.id/index.php/naval
M. C. R. Muhammad Ali Reza, Mohammad Miftachul Munir, “Design Spherical Storage Tank for Storage LPG on Project Tenau, Kupang,” pp. 20–23, 2020, [Online]. Available: http://puskim.pu.go.id/Aplikasi/desain_spektra_indo
S. Boobalan, K. Lakshmi, and S. Gobhinath, “Mathematical modelling and simulation of non-linear PID controller for spherical tank level control in oil and gas industry,” Int. J. Innov. Technol. Explor. Eng., vol. 8, no. 7, pp. 1389–1394, 2019.
S. Rahmani, S. A. Rosana, and G. H. Tian, “Pengaplikasian Kontroler PID Pada Sistem Kontrol Level Ketinggian Air Menggunakan MATLAB,” Telekontran J. Ilm. Telekomun. Kendali dan Elektron. Terap., vol. 10, no. 2, pp. 174–181, 2022.
M. Vinodhini, “Real-Time Level Control of Spherical Tank Process using Gain Scheduled PID Controller,” J. Adv. Res. Instrum. Control Eng., vol. 09, no. 3&4, pp. 1–7, 2022, doi: 10.24321/2456.1398.202201.
C. N. Hamdani, W. W. Adi, and D. O. Anggriawan, “Comparative Study on Fuzzy Supervision and Gain Scheduling for Nonlinear Level Control System,” Proc. 2nd Borobudur Int. Symp. Sci. Technol. (BIS-STE 2020), vol. 203, pp. 493–497, 2021, doi: 10.2991/aer.k.210810.085.
T. Bowo Setiyo, A. Triwiyatno, and Sumardi, “Perancangan Model Predictive Control (Mpc) Pada Proses Quadruple Tank,” Transient, vol. 2, pp. 565–572, 2013.
G. Forte, F. Alberini, M. Simmons, and H. E. Stitt, “Use of acoustic emission in combination with machine learning: monitoring of gas–liquid mixing in stirred tanks,” J. Intell. Manuf., vol. 32, no. 2, pp. 633–647, 2021, doi: 10.1007/s10845-020-01611-z.
S. A. Wananda, P. S. Maria, A. Ullah, and J. Jufrizel, “Desain Model Kendali Mrac-Pd Untuk Pengaturan Level Deaerator Pada Pt Pertamina Ru Ii Dumai,” J. Al-AZHAR Indones. SERI SAINS DAN Teknol., vol. 8, no. 1, p. 67, 2023, doi: 10.36722/sst.v8i1.1761.
R. B. Balaram Naik and S. Kanagalakshmi, “Mathematical Modelling and Controller Design for Interacting Hybrid Two Tank System (IHTTS),” Proc. 4th Int. Conf. Inven. Syst. Control. ICISC 2020, no. Icisc, pp. 297–303, 2020, doi: 10.1109/ICISC47916.2020.9171218.
S. M. Turkane, “Design Of Gain Scheduled PID Controller For Nonlinear Liquidlevel System,” Int. J. Sci. Technol. Res., vol. 9, no. 10, 2020, [Online]. Available: www.ijstr.org
P. P. Simanjuntak and A. Triwiyatno, “PENGATURAN SUHU DENGAN METODE GAIN SCHEDULING PI PADA PROTOTIPE INKUBATOR TELUR BERBASIS,” vol. 10, no. 3, pp. 84–93, 2022.
A. Khuriati, “Identifikasi dan Perancangan Pengendali PID Menggunakan Penduga ARX Terhadap Sistem Pemanas Udara dengan Kriteria ISE, IAE, ITSE, dan ITAE,” Berk. Fis., vol. 15, no. 4, pp. 111–116, 2012.
A. A. M. Zahir, S. S. N. Alhady, W. A. F. W. Othman, A. A. A. Wahab, and M. F. Ahmad, “Objective functions modification of GA optimized PID controller for brushed DC motor,” Int. J. Electr. Comput. Eng., vol. 10, no. 3, pp. 2426–2433, 2020, doi: 10.11591/ijece.v10i3.pp2426-2433.
Downloads
Published
How to Cite
Issue
Section
License
The copyright to this article is transferred to Universitas Mercu Buana (UMB) if and when the article is accepted for publication. The undersigned hereby transfers any and all rights in and to the paper including without limitation all copyrights to UMB. The undersigned hereby represents and warrants that the paper is original and that he/she is the author of the paper, except for material that is clearly identified as to its original source, with permission notices from the copyright owners where required. The undersigned represents that he/she has the power and authority to make and execute this assignment.
We declare that:
1. This paper has not been published in the same form elsewhere.
2. It will not be submitted anywhere else for publication prior to acceptance/rejection by this Journal.
3. A copyright permission is obtained for materials published elsewhere and which require this permission for reproduction.
Furthermore, I/We hereby transfer the unlimited rights of publication of the above mentioned paper in whole to UMB. The copyright transfer covers the exclusive right to reproduce and distribute the article, including reprints, translations, photographic reproductions, microform, electronic form (offline, online) or any other reproductions of similar nature.
The corresponding author signs for and accepts responsibility for releasing this material on behalf of any and all co-authors. This agreement is to be signed by at least one of the authors who have obtained the assent of the co-author(s) where applicable. After submission of this agreement signed by the corresponding author, changes of authorship or in the order of the authors listed will not be accepted.
Retained Rights/Terms and Conditions
1. Authors retain all proprietary rights in any process, procedure, or article of manufacture described in the Work.
2. Authors may reproduce or authorize others to reproduce the Work or derivative works for the authors personal use or for company use, provided that the source and the UMB copyright notice are indicated, the copies are not used in any way that implies UMB endorsement of a product or service of any employer, and the copies themselves are not offered for sale.
3. Although authors are permitted to re-use all or portions of the Work in other works, this does not include granting third-party requests for reprinting, republishing, or other types of re-use.
