Rancang Bangun Sistem Pemantauan Dan Pengendali Kualitas Udara Diruang MI (Manual Insert) PT. Smart Meter
DOI:
https://doi.org/10.22441/jte.2021.v12i1.004Keywords:
Monitoring, Kualitas Udara, Internet of Thing, ISPU(Indeks Standar Pencemaran Udara), ESP32, Ubidots, SensorAbstract
Polusi udara adalah zat fisik, kimia, maupun biologi yang dapat membahayakan kesehatan dan dapat menimbulkan penyakit pada makhluk hidup, udara merupakan salah satu unsur pokok bagi makhluk hidup. Sistem monitoring pada penelitian ini mengacu pada data yang didapatkan dari tiga kombinasi sensor, sensor Air quality sensor untuk mengukur kadar kualitas udara, sensor MQ-7 sebagai pengukur gas karbon monoksida(CO), sensor MQ-135 sebagai pengukur gas karbon Dioksida (CO2). Membuat alat yang dapat mengukur kualitas udara dengan akurasi yang baik, Memperbaiki sirkulasi udara dalam ruangan dan menjaga kualitas-nya, masuk dalam ambang batas standar ISPU atau WHO serta Mengurangi kadar udara berbahaya yang secara langsung dapat merugikan kesehtan. Hasil dari penelitian ini menunjukan bahwa sistem yang dibuat mampu mendeteksi kualitas udara dan kadar gas dengan kecepatan respon 0,5 detik saat sistem dilakukan uji coba pada ruang MI (dalam ruangan, ber-AC) dengan suhu ruangan 27ºC, kelembaban 63% rata-rata Kadar kualitas udara didalam ruang MI saat dilakukan pengujian yaitu 29,7 ppm. Sedangkan untuk kadar gas CO2 adalah 10.90 ppm dan untuk kadar gas CO rata-rata 1.48 ppm.Downloads
References
S. R. Damaik, “Sistem Monitoring Kualitas Udara Pada Kamar Rumah Sakit Menggunakan Sensor DHT11, MQ135 dan Arduino”. Universitas Sumatra Utara. Medan, 2019.
A. S. Mannaf, F. A. Setyaningsih and I. Ruslianto, “Purwarupa Sitem Deteksi dan Pengurangan Kadar CO, CO2 dan NO2 Berbasis Mikrokontroler”, Coding Jurnal Komputer dan Aplikasi, Universitas Tanjung Pura, vol. 4, no. 3, 2016.
M. Jacquline and O. Lengkong, “Sistem Monitoring dan Notifikasi Kualitas Udara dalam Ruangan dengan Platform IoT”, CogITo Smart Journal 4(1):94, 2018.
Irianto, F. D. Murdianto, D. S. Fitrian and E. Sunarno, “Implementasi Sistem Monitoring Kualitas Udara Dalam Ruangan Berbasis Internet of Things (IoT)”, Jurnal Teknik Elektro dan Komputer TRIAC, 2019.
J. Esquiagola, M. Manini, A. S. Aikawa, L. Yoshioka and M. K. Zuffo, “Monitoring Indoor Air Quality by using IoT Technology”, XXV International Conference on Electronics, Electrical Engineering and Computing - INTECON 2018
M. J. S. Mulia, “Rancang Bangun Pemantau Kualitas Pencemar Udara Menggunakan Sensor di Industri Gula Berbasis Android”. Politeknik Negeri Surabaya, Surabaya, 2019.
S. Widodo, M. M. Amin, A. Sutrisman and A. A. Putra, “Rancang Bangun Alat Monitoring Kadar Udara Bersih dan Gas Berbahaya CO, CO2, dan CH4 Dalam Ruangan Berbasis Mikrokontroler”, Politeknik Negeri Sriwijaya Palembang, Palembang, 2017.
A. Adriansyah, S. Budiyanto, J. Andika, A. Romadlan, and N. Nurdin, “Public street lighting control and monitoring system using the internet of things,” The 5th International Conference On Industrial, Mechanical, Electrical, And Chemical Engineering 2019 (ICIMECE 2019), 2020, doi: 10.1063/5.0000594.
F. Tahir, W. Ridwan, and I. Z. Nasibu, “Monitor Kualitas Udara Berbasis Web Menggunakan Raspberry Pi dan Modul Wemos D1”, jt, vol. 18, no. 1, pp. 35-44, Jun. 2020.
B. D. Waluyo, H. D. Hutahaean, and A. Junaidi, “Multiplexer Performance Testing For IoT-Based Air Quality Monitoring System: Multiplexer Performance Testing For IoT-Based Air Quality Monitoring System”, mantik, vol. 4, no. 1, pp. 33-40, May 2020.
Downloads
Published
How to Cite
Issue
Section
License
The copyright to this article is transferred to Universitas Mercu Buana (UMB) if and when the article is accepted for publication. The undersigned hereby transfers any and all rights in and to the paper including without limitation all copyrights to UMB. The undersigned hereby represents and warrants that the paper is original and that he/she is the author of the paper, except for material that is clearly identified as to its original source, with permission notices from the copyright owners where required. The undersigned represents that he/she has the power and authority to make and execute this assignment.
We declare that:
1. This paper has not been published in the same form elsewhere.
2. It will not be submitted anywhere else for publication prior to acceptance/rejection by this Journal.
3. A copyright permission is obtained for materials published elsewhere and which require this permission for reproduction.
Furthermore, I/We hereby transfer the unlimited rights of publication of the above mentioned paper in whole to UMB. The copyright transfer covers the exclusive right to reproduce and distribute the article, including reprints, translations, photographic reproductions, microform, electronic form (offline, online) or any other reproductions of similar nature.
The corresponding author signs for and accepts responsibility for releasing this material on behalf of any and all co-authors. This agreement is to be signed by at least one of the authors who have obtained the assent of the co-author(s) where applicable. After submission of this agreement signed by the corresponding author, changes of authorship or in the order of the authors listed will not be accepted.
Retained Rights/Terms and Conditions
1. Authors retain all proprietary rights in any process, procedure, or article of manufacture described in the Work.
2. Authors may reproduce or authorize others to reproduce the Work or derivative works for the authors personal use or for company use, provided that the source and the UMB copyright notice are indicated, the copies are not used in any way that implies UMB endorsement of a product or service of any employer, and the copies themselves are not offered for sale.
3. Although authors are permitted to re-use all or portions of the Work in other works, this does not include granting third-party requests for reprinting, republishing, or other types of re-use.
