ANALISIS PENGGUNAAN ELEKTROLISER TERHADAP EMISI GAS BUANG CO DAN HC PADA SEPEDA MOTOR 4 LANGKAH MERK SUZUKI SHOGUN 125 CC TAHUN PEMBUATAN 2010
DOI:
https://doi.org/10.22441/jtm.v3i3.1026Abstract
Pada penelitian ini digunakan motor tipe 4 langkah merk Suzuki Shogun 125 cc dengan tahun pembuatan 2010. Pengambilan data uji emisi gas buang dilakukan ketika motor sebelum dan sesudah memakai elektroliser dengan berbagai campuran elektrolit. Data diambil berdasarkan perubahan putaran mesin mulai dari 1000 rpm sampai 4000 rpm. Hasil tertinggi untuk CO terjadi pada RPM 4000 dengan campuran elektrolit aquades dan 1 ½ sendok makan KOH dengan nilai 1,04 %. Sedangkan CO terendah terjadi pada RPM 3200 ketika motor tidak menggunakan elektroliser dengan nilai 0,07%. Untuk HC tertinggi ada pada RPM 1000 ketika motor tidak menggunakan elektroliser dengan nilai 382 ppm. Sedangkan HC terendah terjadi pada RPM 4000 dengan campuran elektrolit aquades dan KOH sebanyak ½ sendok makan sebanyak 20,33 %. Dimana nilai tertinggi CO2 adalah 8,2% ada pada 2 campuran elektrolit yaitu campuran pertama adalah elektrolit aquades dengan KOH sebanyak 1 sendok makan dan campuran kedua adalah ketika motor menggunakan elektroliser dengan elektrolit hanya aquades saja. Sedangkan untuk nilai CO2 terendah bernilai 4,1%. Berdasarkan pengambilan data-data tersebut, nilai emisi gas buang pada sepeda motor ini masih ada dibawah standar KEPMEN LH 05/2006.Downloads
Downloads
Published
How to Cite
Issue
Section
License
The copyright to this article is transferred to Universitas Mercu Buana (UMB) if and when the article is accepted for publication. The undersigned hereby transfers any and all rights in and to the paper including without limitation all copyrights to UMB. The undersigned hereby represents and warrants that the paper is original and that he/she is the author of the paper, except for material that is clearly identified as to its original source, with permission notices from the copyright owners where required. The undersigned represents that he/she has the power and authority to make and execute this assignment.
We declare that:
1. This paper has not been published in the same form elsewhere.
2. It will not be submitted anywhere else for publication prior to acceptance/rejection by this Journal.
3. A copyright permission is obtained for materials published elsewhere and which require this permission for reproduction.
Furthermore, I/We hereby transfer the unlimited rights of publication of the above mentioned paper in whole to UMB. The copyright transfer covers the exclusive right to reproduce and distribute the article, including reprints, translations, photographic reproductions, microform, electronic form (offline, online) or any other reproductions of similar nature.
The corresponding author signs for and accepts responsibility for releasing this material on behalf of any and all co-authors. This agreement is to be signed by at least one of the authors who have obtained the assent of the co-author(s) where applicable. After submission of this agreement signed by the corresponding author, changes of authorship or in the order of the authors listed will not be accepted.
Retained Rights/Terms and Conditions
1. Authors retain all proprietary rights in any process, procedure, or article of manufacture described in the Work.
2. Authors may reproduce or authorize others to reproduce the Work or derivative works for the authors personal use or for company use, provided that the source and the UMB copyright notice are indicated, the copies are not used in any way that implies UMB endorsement of a product or service of any employer, and the copies themselves are not offered for sale.
3. Although authors are permitted to re-use all or portions of the Work in other works, this does not include granting third-party requests for reprinting, republishing, or other types of re-use.
This work is also licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
