MERANCANGAN ALAT LABELLING BOTOL DENGAN METODE VDI 2221
DOI:
https://doi.org/10.22441/jtm.v13i1.15916Keywords:
Meracangan, Pelabelan Botol, VDI 2221Abstract
Abstrak -- Alat labelling botol adalah alat yang dibuat untuk memudahkan pekerjaan pelabelan pada botol. Namun masih banyak ditemui alat yang digerakan secara manual, karena biaya yang cukup mahal untuk memiliki alat yang bergerak secara otomatis. Seperti penggunaan alat labelling botol yang menggunakan tenaga manusia untuk mengerakan handel penekan label pada botol, karena tidak perlu menggunakan biaya yang mahal untuk menempelkan label pada botol. Penelitian ini bertujuan untuk merancangan alat labelling botol semi otomatis. Perancangan alat labelling botol ini mengacu pada metode VDI 2221 yang memiliki 4 tahap yaitu: klasifikasi tugas, perancangan konsep produk, perancangan wujud produk, dan perancangan terinci. Penelitian ini diharapkan dapat merancang alat labelling botol semi otomatis yang berfungsi dengan baik. Hasil penelitian ini diperoleh rancangan alat labelling botol semi otomatis dengan rangka roll label diatas, dimensi alat 430mm x 405mm x 300mm, scraper persegi tanpa sambungan, transmisi sprocket & rantai, pengikat baut & mur, penggerak stepper motor. Rata rata waktu yang dibutuhkan alat labelling botol semi otomatis untuk melakukan pelabelan adalah 3,262 detik.
Kata kunci: Meracangan, Pelabelan Botol, VDI 2221
Abstract-- Bottle labeling tool is a tool made to facilitate labeling work on bottles. However, there are still many tools that are moved manually, because it is quite expensive to have a tool that moves automatically. Like the use of a bottle labeling tool that uses human power to move the label pressing handel on the bottle, because there is no need to use expensive costs to attach labels to bottles. This study aims to design a semi-automatic bottle labeling tool. The design of this bottle labeling tool refers to the VDI 2221 method which has 4 stages, namely: task classification, product concept design, product design, and detailed design. This research is expected to be able to design a semi-automatic bottle labeling tool that functions properly. The results of this study obtained a semi-automatic bottle labeling device design with a label roll frame above, the dimensions of the tool are 430mm x 405mm x 300mm, a square scraper without a connection, sprocket & chain transmission, bolt & nut fasteners, stepper motor drive. The average time required for the semi-automatic bottle labeling tool to do the labeling is 3.262 seconds.
Keywords: Design, Bottle Labelling, VDI 2221
Downloads
References
Mohd, R. S. D. Bin, Binti, Y. N. H., & Mohd, F. N. F. D. B. (2020). Labelling Bottole Machine.
Nurdin, H., Ambiyar, & Waskito. (2020). Peracangan Elemen Mesin. Padang: UNP Press.
Pujono, ST., M. E. (2019). Bahan Ajar Metode Perancangan Teknik.
Panjaitan, U. (2020). Perancangan Mesin Pencacah Rumput Multifungsi Dengan Metode Vdi 2221. Presisi Jurnal Teknik Mesin, 22(1), 65–78.
Muhammad, Y., & Nanda, P. (2021). Rancang Bangun Alat Pembengkok Kawat Metal Jig. Jurnal Mesin Nusantara, 4(1), 11–20. https://doi.org/10.29407/jmn.v4i1.16017
Arief, R.K. (2018). Metode Desain VDI 2221 Untuk Merancang SKID MPFM SINGLE LINE. Rang Teknik Journal, Volume 1 No 2.
Siregar, S.A.K., & Syahrial. (2021). Perancangan Sepeda Listrik 350 W dengan Metode VDI 2221 untuk Ibu Rumah Tangga Perumahan. SNETO.
Yakub, Y., Erizal., & Yulianto, A.Y. (2016). Desain dan Validasi Sistem Otomatis Feeder Mesin Run-Out Velg Steel Untuk Mobil Kategori I-IV Menggunakan Metode VDI 2221. BINA TEKNIKA, Volume 12 No 1, 11-22.
Moch, Y., Dicky, S., & Agham, B. (2019). Analisa Pengujian Koefisien Gesek Material Vcn Terhadap Material Bronze. Jurnal Austenit, 11(1), 6–10.
B. Sudibyo, Ing. HTL. (1986). MEKANIK TEKNIK 3. Surakarta: ATMI PRESS SOLO.
Luthfianto, A. (2017). Perencanaan Ulang Sistem Transmisi Rantai Mobil Nogogeni Evo 3 Andrian. Institut Teknologi Sepuluh November Surabaya, 1–47.
Sandiono, B. at N., & Purkuncoro, A. E. (2019). Sistem Transmisi Mesin Pembuat Sandal Bermotif. 1, 1–4.
B. Sudibyo, Ing. HTL. (1986). BANTALAN GELINDING. Surakarta: ATMI PRESS SOLO.
B. Sudibyo, Ing. HTL. (1986). Strength of Material. Surakarta: ATMI PRESS SOLO.
Downloads
Published
How to Cite
Issue
Section
License
The copyright to this article is transferred to Universitas Mercu Buana (UMB) if and when the article is accepted for publication. The undersigned hereby transfers any and all rights in and to the paper including without limitation all copyrights to UMB. The undersigned hereby represents and warrants that the paper is original and that he/she is the author of the paper, except for material that is clearly identified as to its original source, with permission notices from the copyright owners where required. The undersigned represents that he/she has the power and authority to make and execute this assignment.
We declare that:
1. This paper has not been published in the same form elsewhere.
2. It will not be submitted anywhere else for publication prior to acceptance/rejection by this Journal.
3. A copyright permission is obtained for materials published elsewhere and which require this permission for reproduction.
Furthermore, I/We hereby transfer the unlimited rights of publication of the above mentioned paper in whole to UMB. The copyright transfer covers the exclusive right to reproduce and distribute the article, including reprints, translations, photographic reproductions, microform, electronic form (offline, online) or any other reproductions of similar nature.
The corresponding author signs for and accepts responsibility for releasing this material on behalf of any and all co-authors. This agreement is to be signed by at least one of the authors who have obtained the assent of the co-author(s) where applicable. After submission of this agreement signed by the corresponding author, changes of authorship or in the order of the authors listed will not be accepted.
Retained Rights/Terms and Conditions
1. Authors retain all proprietary rights in any process, procedure, or article of manufacture described in the Work.
2. Authors may reproduce or authorize others to reproduce the Work or derivative works for the authors personal use or for company use, provided that the source and the UMB copyright notice are indicated, the copies are not used in any way that implies UMB endorsement of a product or service of any employer, and the copies themselves are not offered for sale.
3. Although authors are permitted to re-use all or portions of the Work in other works, this does not include granting third-party requests for reprinting, republishing, or other types of re-use.
This work is also licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
