KAJIAN TEORITIS PERENCANAAN BOILER PIPA API PADA USAHA KECIL VULKANISIR
DOI:
https://doi.org/10.22441/jtm.v8i1.5400Keywords:
Perencanaan, Boiler, VulkanisirAbstract
Boiler atau ketel uap adalah suatu alat berbentuk bejana tertutup yang digunakan untuk menghasilkan uap. Uap diperoleh dengan memanaskan bejana yang berisi air dengan bahan bakar. Uap air adalah sejenis fluida yang merupakan fase gas dari air. Penelitian ini bertujuan untuk merancang kontruksi boiler jenis Vertical fire tube boiler dengan kapasitas 150 kg/jam menghasilkan uap jenuh pada temperatur 150 oC – 200 oC untuk digunakan pada proses pemanasan sistem uap pada usaha kecil vulkanisir ban. Pada penelitian ini akan dikaji mengenai bagaimana perancangan konstruksi boiler jenis vertical fire tube boiler yang menghasilkan uap jenuh pada temperatur 150 oC - 200 oC. Hasil perancangan kontruksi boiler jenis Vertical fire tube boiler dengan spesifikasi sebagai berikut : Jenis uap basah, Temperatur operasi; 150 oC – 200 oC, Tekanan internal; 6 bar, Tekanan operasi; 2 bar, Bahan bakar; kayu bakar, Volume air maksimal; 93,6 liter. (Dimensi boiler yaitu; diameter boiler; 504,6 mm, Tinggi boiler;1450 mm, Diameter pipa api; 42,5 mm dan Jumlah pipa api;13)Downloads
References
Dwi Ardiyanto Effendy. 2013. “Rancang Bangun Boiler untuk Proses Pemanasan Sistem Uap pada Industri Tahu dengan Menggunakan Catia V5”. Skripsi.
Sudarman, Suwahyo, Sunyoto. Sainteknol. 2015. Penerapan Ketel Uap (Steam Boiler) Pada Industri Pengolahan Tahu Untuk Meningkatkan Efisiensi Dan Kualitas Produk.
Denny M.E. Soedjono,Joko Sasetiyanto,Dedy Zulhidayat Noor,Hayu Rara,Febby Hapsari. SNT. 2015. Analisis Perhitungan Dan Perencanaan Water Tube Boiler Berbahan Bakar Lpg Pada Industri Kecil Tahu Di Mojokerto.
Rusnoto. 2008. Perencanaan Ketel Uap Tekanan 6 Atm dengan Bahan Bakar Kayu untuk Industri Sederhana. Oseatek, Edisi 4. Hal 32-35
ASME. 2004. Boiler & Pressure Vessel Code IV, Rules For Contruction fo Heating Boiler. New York : Three Park Avenue
Https://law.resource.org/pub/us/code/ibr/asme.bp vc.iv.2007.pdf 22-06-2018 pukul 15:09
Http://eprints.polsri.ac.id/2009/3/3%20BABII%2 0.pdf 29-07-2018 pukul 17:42
Eprints.polsri.ac.id/1953/3/BAB II.pdf 31-06-2018 pukul 05:46
Downloads
Published
How to Cite
Issue
Section
License
The copyright to this article is transferred to Universitas Mercu Buana (UMB) if and when the article is accepted for publication. The undersigned hereby transfers any and all rights in and to the paper including without limitation all copyrights to UMB. The undersigned hereby represents and warrants that the paper is original and that he/she is the author of the paper, except for material that is clearly identified as to its original source, with permission notices from the copyright owners where required. The undersigned represents that he/she has the power and authority to make and execute this assignment.
We declare that:
1. This paper has not been published in the same form elsewhere.
2. It will not be submitted anywhere else for publication prior to acceptance/rejection by this Journal.
3. A copyright permission is obtained for materials published elsewhere and which require this permission for reproduction.
Furthermore, I/We hereby transfer the unlimited rights of publication of the above mentioned paper in whole to UMB. The copyright transfer covers the exclusive right to reproduce and distribute the article, including reprints, translations, photographic reproductions, microform, electronic form (offline, online) or any other reproductions of similar nature.
The corresponding author signs for and accepts responsibility for releasing this material on behalf of any and all co-authors. This agreement is to be signed by at least one of the authors who have obtained the assent of the co-author(s) where applicable. After submission of this agreement signed by the corresponding author, changes of authorship or in the order of the authors listed will not be accepted.
Retained Rights/Terms and Conditions
1. Authors retain all proprietary rights in any process, procedure, or article of manufacture described in the Work.
2. Authors may reproduce or authorize others to reproduce the Work or derivative works for the authors personal use or for company use, provided that the source and the UMB copyright notice are indicated, the copies are not used in any way that implies UMB endorsement of a product or service of any employer, and the copies themselves are not offered for sale.
3. Although authors are permitted to re-use all or portions of the Work in other works, this does not include granting third-party requests for reprinting, republishing, or other types of re-use.
This work is also licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
