Meminimasi Reject Produk Dengan Kapabilitas Proses Menggunakan Pendekatan Lean Six Sigma
DOI:
https://doi.org/10.22441/oe.2022.v14.i3.059Keywords:
DMAIC, Lean Six Sigma, Process Capability, RejectAbstract
The challenges for manufacturing companies are currently getting bigger, now they are not only facing competition but companies are required to be able to survive the pandemic situation that has occurred throughout the world, including Indonesia. The purpose of this study was to minimize the number of rejects and increase the sigma value of 1 Kg cans of paint in accordance with the Straight Pass Ratio Increase (SPRI) standard of 99.3% with an acceptable percentage of 0.7% Reject. The actual condition of the reject percentage of 1kg paint cans is 6.4%, this is still far from the SPRI standard. Therefore, this research will make improvements, using the Lean Six Sigma concept using the DMAIC method in the repair process stage. The results of the study, obtained 5 types of reject that occur in the production process. In this process there are 4 factors that cause rejects, namely human factors, machines, methods and materials. The sigma value before repair was 3.7 and the cumulative process capability value was 0.062, this is still far from the specification limits that consumers expect. The improvements that have been made in this research are: implementing 5S on the production floor, 5S training and dissemination of SOPs for workers and implementing 5S as a standard operating procedure. After implementing the improvements, there was a decrease in rejects of 88.6%, an increase in the sigma value of 4.5 with a reject percentage of 0.69%. These results have reached the SPRI standards set by the companyDownloads
References
Afif, A., & Purwaningsih, R. (2018). Analisis Waste Pada Industri Mebel Dengan Menggunakan Pendekatan Lean Manufacturing Studi Kasus: CV. Jati Mas Semarang. J@Ti Undip : Jurnal Teknik Industri, 6(4), 1–9. https://doi.org/https://ejournal3.undip.ac.id/index.php/ieoj/article/view/18331
Ahmed, N. G. S., Abohashima, H. S., & Aly, M. F. (2018). Defect reduction using Six Sigma methodology in home appliance company: A case study. Proceedings of the International Conference on Industrial Engineering and Operations Management, 2018(SEP), 1349–1358.
Albassam, M., & Aslam, M. (2022). Product evaluation using uncertainty-based process capability index. Ain Shams Engineering Journal, 101947, 1–5. https://doi.org/10.1016/j.asej.2022.101947
Costa, J. P., Lopes, I. S., & Brito, J. P. (2020). Six sigma application for quality improvement of the pin insertion process. 29th International Conference on Flexible Automation and Intelligent Manufacturing, 38(2019), 1592–1599. https://doi.org/10.1016/j.promfg.2020.01.126
Dillinger, F., Tropschuh, B., Dervis, M. Y., & Reinhart, G. (2022). A Systematic Approach to Identify the Interdependencies of Lean Production and Industry 4.0 Elements. Procedia CIRP, 112, 85–90. https://doi.org/10.1016/j.procir.2022.09.041
Guleria, P., Pathania, A., Bhatti, H., Rojhe, K., & Mahto, D. (2021). Leveraging Lean Six Sigma: Reducing defects and rejections in filter manufacturing industry. Materials Today: Proceedings, 46(17), 8532–8539. https://doi.org/10.1016/j.matpr.2021.03.535
Hendra, Setiawan, I., Hernadewita, & Hermiyetti. (2021). Evaluation of Product Quality Improvement Against Waste in the Electronic Musical Instrument Industry. Jurnal Ilmiah Teknik Elektro Komputer Dan Informatika, 7(3), 402–411. https://doi.org/10.26555/jiteki.v7i3.21904
Hernadewita, H., Setiawan, I., & Hendra, H. (2022). Enhance quality improvement through lean six sigma in division Side Board Clavinova Piano’s. International Journal of Production Management and Engineering, 10(2), 173–181. https://doi.org/10.4995/ijpme.2022.16140
Ibrahim, I., Arifin, D., & Khairunnisa, A. (2020). Analisis Pengendalian Kualitas Menggunakan Metode Six Sigma Dengan Tahapan DMAIC Untuk Mengurangi Jumlah Cacat Pada Produk Vibrating Roller Compactor Di PT. Sakai Indonesia. Jurnal KaLIBRASI - Karya Lintas Ilmu Bidang Rekayasa Arsitektur, Sipil, Industri., 3(1), 18–36. https://doi.org/10.37721/kal.v3i1.639
Irwanto, A., Arifin, D., & Arifin, M. M. (2020). Peningkatan Kualitas Produk Gearbox Dengan Pendekatan DMAIC Six Sigma Pada PT. XYZ. Jurnal KaLIBRASI-Karya Lintas Ilmu Bidang Rekayasa Arsitektur Sipil Industri, 3(1), 1–17. https://doi.org/10.37721/kalibrasi.v3i1.638
Joshi, A., Benitez, J., Huygh, T., Ruiz, L., & De Haes, S. (2021). Impact of IT governance process capability on business performance: Theory and empirical evidence. Decision Support Systems, 157(September), 113668. https://doi.org/10.1016/j.dss.2021.113668
Kartika, H. (2020). Penerapan Lean Kaizen untuk Meningkatkan Produktivitas Line Painting pada Bagian Produksi Automotive dengan Metode PDCA. Jurnal Sistem Teknik Industri (JSTI), 22(1), 22–32. https://doi.org/10.32734/jsti.v22i1.3251
Kartika, H. (2021). Reducing Waste In Plastic Seed Cleaning Process in Injection Machine with Design of Experiment Method. American Journal of Engineering Research, 10(5), 143–150.
Nandakumar, N., Saleeshya, P. G., & Harikumar, P. (2020). Bottleneck Identification and Process Improvement by Lean Six Sigma DMAIC Methodology. Materials Today: Proceedings, 24, 1217–1224. https://doi.org/10.1016/j.matpr.2020.04.436
Palange, A., & Dhatrak, P. (2021). Lean manufacturing a vital tool to enhance productivity in manufacturing. Materials Today: Proceedings, 46, 729–736. https://doi.org/10.1016/j.matpr.2020.12.193
Setiawan, I., Purba, H. H., & Debora, F. (2020). A systematic literature review of implementation six sigma in manufacturing industries. Operations Excellence: Journal of Applied Industrial Engineering, 12(3), 319. https://doi.org/10.22441/oe.2020.v12.i3.005
Setiawan, I., & Setiawan. (2020). Defect reduction of roof panel part in the export delivery process using the DMAIC method: a case study. Jurnal Sistem Dan Manajemen Industri, 4(2), 108–116. https://doi.org/10.30656/jsmi.v4i2.2775
Silvestri, L., Gallo, T., & Silvestri, C. (2022). Which tools are needed to implement Lean Production in an Industry 4.0 environment? A literature review. Procedia Computer Science, 200(2019), 1766–1777. https://doi.org/10.1016/j.procs.2022.01.377
Stauder, J., Buchholz, S., Klocke, F., & Mattfeld, P. (2014). A new framework to evaluate the process capability of production technologies during production ramp-up. Procedia CIRP, 20(C), 126–131. https://doi.org/10.1016/j.procir.2014.05.043
Titmarsh, R., Assad, F., & Harrison, R. (2020). Contributions of lean six sigma to sustainable manufacturing requirements: An industry 4.0 perspective. Procedia CIRP, 90, 589–593. https://doi.org/10.1016/j.procir.2020.02.044
Downloads
Published
How to Cite
Issue
Section
License
The copyright to this article is transferred to Universitas Mercu Buana (UMB) if and when the article is accepted for publication. The undersigned hereby transfers any and all rights in and to the paper including without limitation all copyrights to UMB. The undersigned hereby represents and warrants that the paper is original and that he/she is the author of the paper, except for material that is clearly identified as to its original source, with permission notices from the copyright owners where required. The undersigned represents that he/she has the power and authority to make and execute this assignment.
We declare that:
1. This paper has not been published in the same form elsewhere.
2. It will not be submitted anywhere else for publication prior to acceptance/rejection by this Journal.
3. A copyright permission is obtained for materials published elsewhere and which require this permission for reproduction.
Furthermore, I/We hereby transfer the unlimited rights of publication of the above mentioned paper in whole to UMB. The copyright transfer covers the exclusive right to reproduce and distribute the article, including reprints, translations, photographic reproductions, microform, electronic form (offline, online) or any other reproductions of similar nature.
The corresponding author signs for and accepts responsibility for releasing this material on behalf of any and all co-authors. This agreement is to be signed by at least one of the authors who have obtained the assent of the co-author(s) where applicable. After submission of this agreement signed by the corresponding author, changes of authorship or in the order of the authors listed will not be accepted.
Retained Rights/Terms and Conditions
1. Authors retain all proprietary rights in any process, procedure, or article of manufacture described in the Work.
2. Authors may reproduce or authorize others to reproduce the Work or derivative works for the authors personal use or for company use, provided that the source and the UMB copyright notice are indicated, the copies are not used in any way that implies UMB endorsement of a product or service of any employer, and the copies themselves are not offered for sale.
3. Although authors are permitted to re-use all or portions of the Work in other works, this does not include granting third-party requests for reprinting, republishing, or other types of re-use.
