Analysis of packaging quality control of PT. LMN using the seven tools method and new seven tools
DOI:
https://doi.org/10.22441/oe.2024.v16.i2.109Keywords:
quality, continuous improvement, seven tools, new seven tools, packagingAbstract
Product quality is a crucial factor that influences success in the market and in the company's production process. Quality products meet company standards and consumer expectations. The aim of this study is to identify the causes of product rejections and to analyze process improvements in terms of man, material, machine, method, measurement, and environment to reduce product rejections. The results of data collection show the dominant types of rejects, with the following proposed improvements: Maintain the operators' jobdesk so that they become experts in one area, by motivating them through rewards to improve work quality. Ensure spare stock, efficient forklift lanes and H-1 glue communication. Make continuous improvements in every part of the packaging department and build an information system for glue type requirements. Place SOPs in a visible and obvious location, add machine filters near operators, and improve machines to prevent overweight/underweight rejects. Check and calibrate machines regularly, implement scheduled machine maintenance checklists, and standardise maintenance and delegate tasks to optimise staff schedules. Regularly update the parts list according to the machine specifications, make a tool to pour glue from the drum with minimal noise, and perform regular machine maintenance and use bearings to reduce vibration.Downloads
References
Agus Setiawan, N. (2023). Analisis Pengendalian Kualitas Kemasan Air Minum Jenis Galon Cleo Dengan Metode New Seven Tools. Jurnal Cakrawala Ilmiah, 2(11), 4371–4380.
Ariani, D. W. (2020). Manajemen Kualitas (A. Canty (ed.); 2nd ed.). Universitas Terbuka.
Aziz, R. Z. A. (2019). Total Quality Management : Tahapan Implementasi TQM Dan Gugus Kendali Mutu Usaha Mikro Kecil Dan Menengah (UMKM). Darmajaya ( DJ ) Press.
Chandra Das, P. (2018). Case Studies with Fishbone Analysis. In Fishbone Analysis (p. 5).
Daga, R. (2017). Citra,Kualitas Produk dan Kepuasan Pelanggan (M. E. Prof. Dr. Hamzah Upu (ed.); Issue 1). GLOBAL RESEARCH AND CONSULTING INSTITUTE (Global-RCI).
Faturohman, A. (2024). Analisis Pengendalian Kualitas Produk Manhole Pada Pt. Mega Jaya Logam Dengan Metode New Seven Tools. Jurnal Ilmiah Teknik Mesin, Elektro Dan Komputer, 4(1), 86–101. https://doi.org/10.51903/juritek.v4i1.2628
Gilang Kistianto, D., & Prakoso, I. (2023). Analisis Kualitas Produk Joran Pancing Dengan Menggunakan Metode New Seven Tools (Studi Kasus: Pt.X). Jurnal Ilmiah Teknik Dan Manajemen Industri, 3(1), 68–79.
Grigoryan, E., & Golubkova, I. (2020). Seven Tools for Quality Management and Control: Theory and Practice. 139(Icemt), 528–535. https://doi.org/10.2991/aebmr.k.200509.094
Helmold, M. (2021). Successful Management Strategies and Tools. In Management for Professionals. Springer Nature Switzerland AG. http://dx.doi.org/10.1007/978-3-030-77661-9%0Ahttps://link.springer.com/content/pdf/10.1007/978-3-030-77661-9.pdf
Inayah, S. K., Wahyudin, W., & Herwanto, D. (2023). Analisis Kualitas Produk Toolbox Menggunakan Metode Seven Tools di PT. KSKB. Jurnal Asiimetrik: Jurnal Ilmiah Rekayasa & Inovasi, 5, 263–272. https://doi.org/10.35814/asiimetrik.v5i2.4877
Lafeniya, S. D. A., & Suseno, S. (2023). Pengendalian Kualitas Produk Kain Grey Dengan Metode New Seven Tools Pada PT Djohartex. Jurnal Inovasi Dan Kreativitas (JIKa), 2(2), 46–56. https://doi.org/10.30656/jika.v2i2.6003
Rina Fitriana, Debbie Kemala Sari, A. N. H. (2021). Pengendalian dan Penjaminan Mutu. In N. Wahid (Ed.), Wawasan Ilmu (1st ed.). Wawasan Ilmu.
Simarmata, M. H., & Septiari, R. (2023). Upaya Pengendalian Kualitas Keripik Tempe Terhadap Produk Cacat Menggunakan Metode Statistical Quality Control ( Sqc ) Pada Home Industry Keripik Tempe Sari. 6(2).
Sri Mukti Wirawati, S. N. A. (2021). Analisa Kualitas Produk Baja Besi Beton Menggunakan Metode Basic Seven Tools dan Taguchi di PT. ABC. Jurnal InTent, 4(1).
Sunarto, H. S. W. N. (2020). Buku Saku Analisis Pareto (Suparji (ed.); Issue July). Prodi Kebidanan Magetan Poltekkes Kemenkes Surabaya.
Syifa Aunillah, M. W., Kurniawan, M. D., & Hidayat, H. (2022). Analisis Pengendalian Kualitas Produksi Batu Kumbung Menggunakan Metode Seven Tools (Studi Kasus : CV. Salsabilah Group). Sigma Teknika, 5(1), 030–038. https://doi.org/10.33373/sigmateknika.v5i1.4202
TOBING, B. (2018). Buku Panduan Seven Basic Tools dan Delapan Langkah Perbaikan.
Downloads
Published
How to Cite
Issue
Section
License
The copyright to this article is transferred to Universitas Mercu Buana (UMB) if and when the article is accepted for publication. The undersigned hereby transfers any and all rights in and to the paper including without limitation all copyrights to UMB. The undersigned hereby represents and warrants that the paper is original and that he/she is the author of the paper, except for material that is clearly identified as to its original source, with permission notices from the copyright owners where required. The undersigned represents that he/she has the power and authority to make and execute this assignment.
We declare that:
1. This paper has not been published in the same form elsewhere.
2. It will not be submitted anywhere else for publication prior to acceptance/rejection by this Journal.
3. A copyright permission is obtained for materials published elsewhere and which require this permission for reproduction.
Furthermore, I/We hereby transfer the unlimited rights of publication of the above mentioned paper in whole to UMB. The copyright transfer covers the exclusive right to reproduce and distribute the article, including reprints, translations, photographic reproductions, microform, electronic form (offline, online) or any other reproductions of similar nature.
The corresponding author signs for and accepts responsibility for releasing this material on behalf of any and all co-authors. This agreement is to be signed by at least one of the authors who have obtained the assent of the co-author(s) where applicable. After submission of this agreement signed by the corresponding author, changes of authorship or in the order of the authors listed will not be accepted.
Retained Rights/Terms and Conditions
1. Authors retain all proprietary rights in any process, procedure, or article of manufacture described in the Work.
2. Authors may reproduce or authorize others to reproduce the Work or derivative works for the authors personal use or for company use, provided that the source and the UMB copyright notice are indicated, the copies are not used in any way that implies UMB endorsement of a product or service of any employer, and the copies themselves are not offered for sale.
3. Although authors are permitted to re-use all or portions of the Work in other works, this does not include granting third-party requests for reprinting, republishing, or other types of re-use.
