PERANCANGAN MEJA PENYETRIKA LAUNDRY BERKONSEP ACTUATOR LIFT IRONING TABLE UNTUK MENGURANGI KELUHAN MUSKULOSKELETAL
DOI:
https://doi.org/10.22441/pasti.2021.v15i3.004Keywords:
NBM, QEC, actuator lift ironing tableAbstract
Penelitian ini dilakukan sebagai salah satu tindakan perbaikan fasilitas kerja pada kegiatan penyetrikaan laundry skala menengah di Desa Bandasari dan Desa Karanganyar Kabupaten Tegal untuk mengurangi keluhan muskuloskeletal, dimana perancangan produknya menggunakan metode Lima Langkah Ulrich untuk menetapkan konsep yang akan dipilih, sehingga produk baru tersebut menjadi lebih terarah sesuai dengan kebutuhan pemakainya. Dilakukan juga analisis keluhan subjektif dengan menggunakan metode Nordic Body Map (NBM) dan Quick Exposure Check (QEC). Hasil penelitian berupa meja setrika ergonomis berkonsep actuator lift ironing table dengan dimensi panjang meja 1200 mm, lebar meja 700 mm, tinggi meja normal 660 mm, tinggi meja maksimal 960 mm yang dilengkapi dengan electric linear actuator DC 12V sebagai alat penggerak semi otomatis sehingga ketinggian meja dapat diatur naik dan turun. Hasil analisis diketahui beda rerata skor keluhan NBM adalah 14,50 atau tingkat keluhan turun 25,44%, sedangkan beda rerata nilai exposure level QEC adalah 23,35 atau terjadi penurunan 37,70%.
Downloads
References
Chasanah, M., Siswiyanti, & Luthfianto, S. (2019). Redesain Alat Pemupuk Jagung Untuk Mengurangi Keluhan Muskuloskeletal dengan Analisa Biomekanik dan Fisiologi. Engineering, 10(1), 25–32.
Nofirza, & Hermayu, S. A. (2016). Usulan Perbaikan Postur Dan Fasilitas Kerja Menggunakan Plibel Checklist Dan Quick Exposure Check (QEC) (Studi Kasus : Home Industry Pembuatan Tahu Kusnadi). November, 379–387.
Pembayung, D., Suhardi, B., & Astuti, R. D. (2018). Penilaian Postur Kerja Menggunakan Metode Quick Exposure Checklist (QEC) di IKM Tahu Sari Murni. 17(1), 24–30. https://doi.org/10.20961/performa.17.1.18984
Pheasant, S. (1991). Ergonomics, Work and Health. Macmillan Press. Scentific & Medical.
Pratiknya, A. W. (1993). Dasar-dasar Metodologi Penelitian Kedokteran dan Kesehatan. Raja Gravindo Persada.
Rony, H., & Norjanah, S. (2017). Meja Setrika Ergonomis Untuk Penjahit. Jurnal Kreatif, 5(1), 65–75.
Siswiyanti, & Rusnoto. (2018). Penerapan Ergonomi pada Perancangan Mesin Pewarna Batik untuk Memperbaiki Postur Kerja. Jurnal Optimasi Sistem Industri, 17(1), 75–85. https://doi.org/10.25077/josi.v17.n1.p75-85.2018
Sugiyono. (2007). Metode Penelitian Kuantitatif Kualitatif dan R&D. Alfabeta.
Tarwaka. (2011). Ergonomi Industri: Dasar-dasar Pengetahuan Ergonomi dan Aplikasi di Tempat Kerja (Cetakan 1). Harapan Press.
Ulrich, K. T., & Eppinger, S. D. (2001). Perancangan dan Pengembangan Produk (Edisi 1). Penerbit Salemba Teknika.
Wignjosoebroto, S. (1995). Ergonomi Studi Gerak dan Waktu Teknik Analisis untuk Peningkatan Produktivitas Kerja. Guna Widya.
Downloads
Published
How to Cite
Issue
Section
License
The copyright to this article is transferred to Universitas Mercu Buana (UMB) if and when the article is accepted for publication. The undersigned hereby transfers any and all rights in and to the paper including without limitation all copyrights to UMB. The undersigned hereby represents and warrants that the paper is original and that he/she is the author of the paper, except for material that is clearly identified as to its original source, with permission notices from the copyright owners where required. The undersigned represents that he/she has the power and authority to make and execute this assignment.
We declare that:
1. This paper has not been published in the same form elsewhere.
2. It will not be submitted anywhere else for publication prior to acceptance/rejection by this Journal.
3. A copyright permission is obtained for materials published elsewhere and which require this permission for reproduction.
Furthermore, I/We hereby transfer the unlimited rights of publication of the above mentioned paper in whole to UMB. The copyright transfer covers the exclusive right to reproduce and distribute the article, including reprints, translations, photographic reproductions, microform, electronic form (offline, online) or any other reproductions of similar nature.
The corresponding author signs for and accepts responsibility for releasing this material on behalf of any and all co-authors. This agreement is to be signed by at least one of the authors who have obtained the assent of the co-author(s) where applicable. After submission of this agreement signed by the corresponding author, changes of authorship or in the order of the authors listed will not be accepted.
Retained Rights/Terms and Conditions
1. Authors retain all proprietary rights in any process, procedure, or article of manufacture described in the Work.
2. Authors may reproduce or authorize others to reproduce the Work or derivative works for the authors personal use or for company use, provided that the source and the UMB copyright notice are indicated, the copies are not used in any way that implies UMB endorsement of a product or service of any employer, and the copies themselves are not offered for sale.
3. Although authors are permitted to re-use all or portions of the Work in other works, this does not include granting third-party requests for reprinting, republishing, or other types of re-use.
