RANCANGAN TEMPAT TIDUR KURSI RODA ERGONOMIS UNTUK MENUNJANG FASILITAS PELAYANAN KESEHATAN SAAT PANDEMI COVID-19
DOI:
https://doi.org/10.22441/pasti.2021.v15i3.007Kata Kunci:
Covid-19, ENASE, kursi rodaAbstrak
Kebutuhan fasilitas kesehatan khususnya tempat tidur mengalami peningkatan saat Pandemi Covid-19, namun ketersediaan tempat tidur masih sangat minim. Penambahan tempat tidur pasien tentu membutuhkan biaya yang cukup besar, sehingga untuk memenuhi kebutuhan tempat tidur dilakukan perancangan ulang kursi roda tidak terpakai. Tujuan penelitian ini adalah perancangan ulang kursi roda sesuai dengan kebutuhan konsumen dan aspek ergonomi. Metode penelitian yang di gunakan yaitu ergonomic function deployment (EFD) dan antropometri. Atribut yang digunakan yaitu efektif, nyaman, aman, sehat dan efisien. Penyebaran kuesioner melibatkan responden di lingkungan fasilitas pelayananan kesehatan sebagai pengguna kursi roda dengan menggunakan teknik insidensial sampling. Hasil penelitian berdasarkan kebutuhan konsumen terdapat tempat infus, tempat oksigen portable, tempat penyimpanan dokumen, penyangga kepala, penyangga kaki, produk tidak memakan tempat, menggunakan matras tidak panas dan mudah dibersihkan. Berdasarkan analisis house of ergonomic prioritas utama pengembangan tempat tidur kursi roda bagi pasien covid-19 yaitu dilengkapi dengan penyangga kepala dengan penambahan tinggi 25 cm.
Unduhan
Referensi
______. 2020. Corona Covid-19. Tersedia pada: https://infocorona.bantenprov.go.id/.
Damayanti K.A. 2000. Ergonomic Function Deployment Sebuah Pengembangan Dari Quality Function Deployment. Jurnal Teknik Industri Surabaya: Lab APK dan Ergonomi Universitas Kristen Petra, Vol.7(1), 21-30.
Folkesson, P., & Olsson, T. 1997. Redisgn of a Wheelchair Frame Side. Sweden: Departement of Mechanical Engineering.
Gumasing, J. J. M., Villapando, C. A., & Pernia, C. K. 2019. An ergonomic design of wheelchair bed transfer for post stroke patients. International Conference on Management Science and Industrial Engineering, 275–279. https://doi.org/10.1145/3335550.3339900
Hidayati, N. 2013. The Impact of the School Safety Zone on Passenger Car Equivalent Values in Indonesian Urban Roads (Thesis). The University of Leeds.
Lee W. 2017 . Effects Among Product Attributes, Involvement, Word-Of-Mouth, and Purchase Intention In Online Shopping. Journal of Management, Vol 22(4).
Meyharti, Herni F. & Desrianty A. 2013. Usulan Rancangan Baby Tafel Portable dengan Menggunakan Metode Ergonomic Function Deployment (EFD). Jurnal Online Institut Teknologi Nasional, Vol. 2(1), 170-180.
Prasetyo W. 2015. Redesain Alat Pemipihan Biji Melinjo Dengan Pendekatan Metode Antropometri Di UD. SARTIKA. Jurnal Teknik Industri Untirta, Vol. 3(2), 1 – 8.
Savitri, T. 2010. 8 Jenis Kursi Roda Dengan Fungsi Berbeda yang Bisa Jadi Pilihan Anda. Tersedia pada: https://hellosehat.com/hidup-sehat/tips-sehat/tipe-dan-jenis-kursi-roda/.
Shofa J. M. & Iman F. 2020. Pengembangan Produk Spring Steel Menggunakan Kerangka Kerja Quality Function Deployment. Performa : Media Ilmiah Teknik Industri, Vol. 19 (1), 9-18.
Tarwaka. 2015. Ergonomi Industri, Dasar-Dasar Pengetahuan Ergonomi dan Aplikasi di Tempat Kerja. Solo:Harapan press.
Ulrich, K.T., & Eppinger, S.D. 2001. Perancangan dan Pengembangan Produk. Jakarta: Salemba Teknika.
Unduhan
File Tambahan
Diterbitkan
Cara Mengutip
Terbitan
Bagian
Lisensi
The copyright to this article is transferred to Universitas Mercu Buana (UMB) if and when the article is accepted for publication. The undersigned hereby transfers any and all rights in and to the paper including without limitation all copyrights to UMB. The undersigned hereby represents and warrants that the paper is original and that he/she is the author of the paper, except for material that is clearly identified as to its original source, with permission notices from the copyright owners where required. The undersigned represents that he/she has the power and authority to make and execute this assignment.
We declare that:
1. This paper has not been published in the same form elsewhere.
2. It will not be submitted anywhere else for publication prior to acceptance/rejection by this Journal.
3. A copyright permission is obtained for materials published elsewhere and which require this permission for reproduction.
Furthermore, I/We hereby transfer the unlimited rights of publication of the above mentioned paper in whole to UMB. The copyright transfer covers the exclusive right to reproduce and distribute the article, including reprints, translations, photographic reproductions, microform, electronic form (offline, online) or any other reproductions of similar nature.
The corresponding author signs for and accepts responsibility for releasing this material on behalf of any and all co-authors. This agreement is to be signed by at least one of the authors who have obtained the assent of the co-author(s) where applicable. After submission of this agreement signed by the corresponding author, changes of authorship or in the order of the authors listed will not be accepted.
Retained Rights/Terms and Conditions
1. Authors retain all proprietary rights in any process, procedure, or article of manufacture described in the Work.
2. Authors may reproduce or authorize others to reproduce the Work or derivative works for the authors personal use or for company use, provided that the source and the UMB copyright notice are indicated, the copies are not used in any way that implies UMB endorsement of a product or service of any employer, and the copies themselves are not offered for sale.
3. Although authors are permitted to re-use all or portions of the Work in other works, this does not include granting third-party requests for reprinting, republishing, or other types of re-use.
