Identifikasi Potensi Kecelakaan Kerja Pada Proses Pengelasan di Bengkel Las K Dengan Metode HIRARC
DOI:
https://doi.org/10.22441/pasti.2023.v17i3.003Keywords:
work accidents, identifying hazards, managing riskAbstract
Kecelakaan kerja di industri pengelasan menjadi perhatian utama karena dapat menyebabkan cedera serius pada pekerja, kehilangan material dan berdampak negatif terhadap produktivitas. Oleh karena itu, penting dilakukan identifikasi dan menganalisis potensi kecelakaan kerja dalam proses pengelasan dan mengembangkan strategi pencegahan yang efektif. Penelitian dilakukan untuk menganalisis kecelakaan kerja yang dapat terjadi pada saat pengelasan pada bengkel las dengan menggunakan metode HIRARC (Hazard Identification, Risk Assessment, and Risk Control) serta mengidentifikasi langkah-langkah pengendalian yang tepat. Pengambilan data dilakukan melalui observasi langsung dan analisis terhadap berbagai tahapan proses pengelasan di bengkel las yang melibatkan berbagai jenis pekerjaan pengelasan, termasuk persiapan material, pengaturan mesin, proses pengelasan, dan penyelesaian pekerjaan. Hasil penelitian menunjukkan bahwa risiko kecelakaan yang terkait dengan mesin pengelasan yang tidak aman, tidak menggunakan alat pelindung diri (APD) yang memadai, eksposur bahan kimia berbahaya, serta risiko kebakaran dan ledakan akibat kegagalan dalam prosedur pengendalian keselamatan.Downloads
References
Afdahlika, H., Hamid, A., & Maliga, I. (2021). Hubungan Pengetahuan Kesehatan dan Keselamatan Kerja (K3) dengan Kecelakaan Kerja pada Tukang Las di Kecamatan Sumbawa Tahun 2020. Jurnal Kesehatan Dan Sains, 4(1), 71–78.
Amelita, R., (2019). Faktor-Faktor yang Menyebabkan Kecelakaan Kerja pada Pekerja Bagian Pengelasan di PT. Johan. PREPOTIF: Jurnal Kesehatan Masyarakat, Vol 3, No 1, 35-49.
Ihsan, T., Edwin, T., & Irawan, R., O. (2017). Analisis Risiko K3 Dengan Metode HIRARC Pada Area Produksi PT. Cahaya Murni Andalas Permai. Jurnal Kesehatan Masyarakat Andalas, 10(2), 179–185. https://doi.org/10.24893/jkma.v10i2.204.
Irawan, S. Panjaitan, T. W. S., Bendatu, L. Y. (2015). Penyusunan Hazard Identification Risk Assessment and Risk Control (HIRARC) di PT. X. Jurnal Titra, Vol. 3, No 1, pp. 15-18.
Pisceliya, D. M. R., Mindayani, S. (2018). Analisis Kecelakaan Kerja pada Pekerja Pengelasan di CV. Cahaya Tiga Putri. Jurnal Riset Hesti Medan, Vol. 3, No. 1, 66-75.
Wijaya, A., Panjaitan, T. W. S., Palit, H. C. (2015). Evaluasi Kesehatan dan Keselamatan Kerja dengan Metode HIRARC pada PT. Charoen Pokphand Indonesia. Jurnal Titra, Vol 3, No 1, pp. 29-34.
Downloads
Published
How to Cite
Issue
Section
License
The copyright to this article is transferred to Universitas Mercu Buana (UMB) if and when the article is accepted for publication. The undersigned hereby transfers any and all rights in and to the paper including without limitation all copyrights to UMB. The undersigned hereby represents and warrants that the paper is original and that he/she is the author of the paper, except for material that is clearly identified as to its original source, with permission notices from the copyright owners where required. The undersigned represents that he/she has the power and authority to make and execute this assignment.
We declare that:
1. This paper has not been published in the same form elsewhere.
2. It will not be submitted anywhere else for publication prior to acceptance/rejection by this Journal.
3. A copyright permission is obtained for materials published elsewhere and which require this permission for reproduction.
Furthermore, I/We hereby transfer the unlimited rights of publication of the above mentioned paper in whole to UMB. The copyright transfer covers the exclusive right to reproduce and distribute the article, including reprints, translations, photographic reproductions, microform, electronic form (offline, online) or any other reproductions of similar nature.
The corresponding author signs for and accepts responsibility for releasing this material on behalf of any and all co-authors. This agreement is to be signed by at least one of the authors who have obtained the assent of the co-author(s) where applicable. After submission of this agreement signed by the corresponding author, changes of authorship or in the order of the authors listed will not be accepted.
Retained Rights/Terms and Conditions
1. Authors retain all proprietary rights in any process, procedure, or article of manufacture described in the Work.
2. Authors may reproduce or authorize others to reproduce the Work or derivative works for the authors personal use or for company use, provided that the source and the UMB copyright notice are indicated, the copies are not used in any way that implies UMB endorsement of a product or service of any employer, and the copies themselves are not offered for sale.
3. Although authors are permitted to re-use all or portions of the Work in other works, this does not include granting third-party requests for reprinting, republishing, or other types of re-use.
