Perencanaan Bisnis Provider Transaksi Pembayaran berbasis RFID pada Hypermarket Makro
DOI:
https://doi.org/10.22441/incomtech.v1i1.245Keywords:
Perencanaan bisnis, Penyelenggara transaksi, Teknologi RFIDAbstract
RFID (Radio-Frequency IDentification) merupakan sebuah teknologi compact wireless yang diunggulkan untuk mentransformasi dunia komersial. Sebagai suksesor dari barcode, RFID dapat melakukan kontrol otomatis untuk banyak hal. RFID adalah sebuah teknologi yang memanfaatkan frekuensi radio untuk identifikasi otomatis terhadap obyekobyek atau manusia. Kenyataan bahwa manusia amat terampil dalam mengidentifikasi obyek-obyek dalam kondisi lingkungan yang berbedabeda menjadi motivasi dari teknologi ini. Sistem pembayaran dengan menggunakan teknologi RFID dapat dilakukan secara swalayan dengan mudah dan cepat. Penggunaan teknologi ini dapat memudahkan dan mempercepat transaksi pembelian dan dilakukan oleh pembeli itu sendiri. Mereka hanya mendekatkan semua barang yang dibeli kepada alat reader RFID, dan setelah selesai mereka menekan tombol total dan diakhiri dengan mendekatkan kartu pembayaran (sejenis kartu debit atau kartu kredit). Dengan didekatnya kartu yang telah diberikan mikro chip sebagai alat pembayaran tersebut, maka saldo uang pembeli yang berada di kartu tersebut berkurang. Transaksi ini menjadi cepat dan mudah karena tidak diperlukannya uang pengembalian dan dapat dilakukan secara mandiri oleh pembeli.Downloads
References
__________( ), Radio Frequency Identification (RFID) Systems, http://www.epic.org/privacy/rfid/, Tanggal Akses 4 Januari 2009
United States Government Accountability Office (2005), Informaton Security : Radio Frequency Identification Technology in the Federal Government, http://www.gao.gov/new.items, Tanggal Akses 4 Januari 2009
Anonim, Financial Management For Non Finance managers, Multi Daya Tata Karya, Jakarta, 2001
Ari Juels (2005), RFID Security and Privacy: A Research Survey, http://www.rsasecurity.com/rsalabs/staff/bios/ajuels/publications/pdfs/rfid_survey_28_09_05.pdf Tanggal Akses 4 Januari 2009
Ari Juels and Paul Syverson and Dan Bailey, High-Power Proxies for Enhancing RFID Privacy and Utility,
http://www.rsasecurity.com/rsalabs/staff/bios/ajuels/publications/pdfs/RFIDREP2.pdf. Tanggal Akses 4 Januari 2009
Ari Juels and Stephen A. Weis (2006), Defining Strong Privacy for RFID, http://www.rsasecurity.com/rsalabs/staff/bios/ajuels/publications/rfid_privacy/rfidprivacy.pdf, Tanggal Akses 4 Januari 2009
Berry, T., A Standard for Business Plan, www.bplans.com, Article, 20 July 2004
Horne, V. dan Wachowicz, Jr. Prinsip-prinsip Manajemen Keuangan, Edisi Kesembilan, Penerbit Salemba Empat, Jakarta, 1998
Ibrahim, H.M. Yacob, “Studi Kelayakan Bisnis”. PT. Rineka Cipta, Jakarta, 1998.
Kasali, R., Membidik Pasar Indonesia: Segmentasi, Targeting, Positioning, PT Gramedia Pustaka Utama, Jakarta, 1998
Kotler, Philip, Manajemen Pemasaran, Edisi Milenium, PT. Prenhalindo, Jakarta, 2003.
Rangkuti, Freddy, “Business Plan : Teknik Membuat Perencanaan Bisnis dan Analisis Kasus”. PT. Gramedia Pustaka Utama, Jakarta, 2001.
Suad Husnan, Suwarsono Muhammad, Studi Kelayakan Proyek,Edisi 4, UPP AMP YKPN Yogyakarta, 2000.
Umar, Husein, “Busniness An Introduction”. PT. Gramedia Pustaka Utama, Jakarta, 2000.
Umar, Husein, “Studi Kelayakan Bisnis : Teknik Menganalisis Kelayakan Rencana Bisnis secara Komprehensif, Edisi Kedua”. PT. Gramedia Pustaka Utama, Jakarta, 2001.
Downloads
Published
How to Cite
Issue
Section
License
The copyright to this article is transferred to Universitas Mercu Buana (UMB) if and when the article is accepted for publication. The undersigned hereby transfers any and all rights in and to the paper including without limitation all copyrights to UMB. The undersigned hereby represents and warrants that the paper is original and that he/she is the author of the paper, except for material that is clearly identified as to its original source, with permission notices from the copyright owners where required. The undersigned represents that he/she has the power and authority to make and execute this assignment.
We declare that:
1. This paper has not been published in the same form elsewhere.
2. It will not be submitted anywhere else for publication prior to acceptance/rejection by this Journal.
3. A copyright permission is obtained for materials published elsewhere and which require this permission for reproduction.
Furthermore, I/We hereby transfer the unlimited rights of publication of the above mentioned paper in whole to UMB. The copyright transfer covers the exclusive right to reproduce and distribute the article, including reprints, translations, photographic reproductions, microform, electronic form (offline, online) or any other reproductions of similar nature.
The corresponding author signs for and accepts responsibility for releasing this material on behalf of any and all co-authors. This agreement is to be signed by at least one of the authors who have obtained the assent of the co-author(s) where applicable. After submission of this agreement signed by the corresponding author, changes of authorship or in the order of the authors listed will not be accepted.
Retained Rights/Terms and Conditions
1. Authors retain all proprietary rights in any process, procedure, or article of manufacture described in the Work.
2. Authors may reproduce or authorize others to reproduce the Work or derivative works for the authors personal use or for company use, provided that the source and the UMB copyright notice are indicated, the copies are not used in any way that implies UMB endorsement of a product or service of any employer, and the copies themselves are not offered for sale.
3. Although authors are permitted to re-use all or portions of the Work in other works, this does not include granting third-party requests for reprinting, republishing, or other types of re-use.
