Design and Implementation of Image Capture for Cluster Housing Security System Based on IoT
DOI:
https://doi.org/10.22441/incomtech.v12i3.15514Abstract
The performance of IoT platforms to security systems has been implemented by some researchers in various scopes such as door, garage, and house gates. Implementing an IoT platform to the gate residential cluster is performed for entering and exiting the gate. Having an interactive system, sending an image of the visitor to the resident, and operating an automatic gate are three main features developed in this work. Using Arduino board to MATLAB and Arduino to Blynk interconnections is implemented to perform those three features. This work describes the entire process of its creation from hardware requirements, through the system's design, up to the simulation test from the running process. From the simulation test, the device can interact with the incoming visitor within 1.33 seconds on average, with the accuracy of the played voice being 100% correct, and the image sent to the 100% proper corresponding resident is done within the time taken to respond to permission granted is 1.56 seconds, while the permission denied takes 1.39 seconds.
Downloads
References
A. Najib, R. Munadi and N. Kar, "Security system with RFID control using E-KTP and internet of things," Bulletin of Electrical Engineering and Informatic, vol. 10, no. 3, pp. 1436-1445, 2021.
R. Reddy, P. V. Krishna, M. K. Chaitanya and M. Neeharika, "Security System Based on Knock-Pattern Using Arduino and GSM Communication," International Journal of Engineering and Techniques, vol. 4, no. 1, pp. 154-157, 2018.
S. Yedulapuram, R. Arabelli, K. Mahender and C. Sidhardha, "Automatic Door Lock System by Face Recognition," in in International Conference on Recent Advancements in Engineering and Management (ICRAEM-2020), Warangal, India, 2020.
H. Amiliansyah, M. Galina and J. W. Simatupang, "Access Control and Security System Via Bluetooth Application on Android SmartphonE," ELTIKOM, vol. 6, no. 1, pp. 100-108, 2022.
S. S. P. d. Keamanan, "Statistik Kriminal 2018," Badan Pusat StatistiK, Jakarta, 2018.
K. Lawal and H. N. Rafsanjani, "Trends, benefits, risks, and challenges of IoT implementation in residential and commercial buildings," Energy and Built Environment, vol. 3, no. 3, pp. 251-256, 2022.
H. Sundmaeker, P. Guillemin, P. Friess and S. Woelfflé, "Vision and challenges for realizing the internet of things, Brussels: Clust. Eur. Res. Proj.," Internet Things Eur, 2010.
D. Miorandi, S. Sicari, F. De. Pellegrini, I. Chlamtac and S, "Internet of things: vision, applications and research challenges," Ad Hoc Networks, vol. 10, no. 7, pp. 1497-1516, 2010.
F. Xia, L. Yang, L. Wang and A. Vinel, "Internet of things," International Journal of Communication Systems, vol. 25, no. 9, pp. 1101-1102, 2012.
A. Aryal, F. Anselmo and B. B-Gerber, "Smart IoT desk for personalizing indoor environmental conditions," in in Proceedings of the 8th International Conference on the Internet of Things (2019), Santa Barbara, CA, USA,, 2018.
D. Mocrii, Y. Chen and P. Musilek, "IoT-based smart homes: a review of system architecture, software, communications, privacy and security," Internet Things, Vols. 1-2, pp. 81-98, 2018.
A. Khanna and S. Kaur, "Evolution of Internet of Things (IoT) and its significant impact in the field of Precision Agriculture," Computers and Electronics in Agriculture, vol. 157, pp. 218-231, 2019.
K. Govinda, K. S. K. Prasad and S. R. Susheel, "Intrusion detection system for smart home using laser rays," International Journal for Scientific Research & Development (IJSRD), vol. 2, no. 3, pp. 176-178, 2014.
M. Sarma, A. Gogoi, R. Saikia and D. J. Bora, "Fingerprint Based Door Access System using Arduino," International Journal of Scientific Research in Engineering and Management (IJSREM), vol. 4, no. 8, pp. 1-5, 2020.
D. Mahjabeen and M. R. Tarafder, "Unique Authentication for Door Lock system through Bio Scanning-Finger Print Security System," Global Scientific Journals, vol. 9, no. 10, pp. 1559-1565, 2021.
Downloads
Published
How to Cite
Issue
Section
License
The copyright to this article is transferred to Universitas Mercu Buana (UMB) if and when the article is accepted for publication. The undersigned hereby transfers any and all rights in and to the paper including without limitation all copyrights to UMB. The undersigned hereby represents and warrants that the paper is original and that he/she is the author of the paper, except for material that is clearly identified as to its original source, with permission notices from the copyright owners where required. The undersigned represents that he/she has the power and authority to make and execute this assignment.
We declare that:
1. This paper has not been published in the same form elsewhere.
2. It will not be submitted anywhere else for publication prior to acceptance/rejection by this Journal.
3. A copyright permission is obtained for materials published elsewhere and which require this permission for reproduction.
Furthermore, I/We hereby transfer the unlimited rights of publication of the above mentioned paper in whole to UMB. The copyright transfer covers the exclusive right to reproduce and distribute the article, including reprints, translations, photographic reproductions, microform, electronic form (offline, online) or any other reproductions of similar nature.
The corresponding author signs for and accepts responsibility for releasing this material on behalf of any and all co-authors. This agreement is to be signed by at least one of the authors who have obtained the assent of the co-author(s) where applicable. After submission of this agreement signed by the corresponding author, changes of authorship or in the order of the authors listed will not be accepted.
Retained Rights/Terms and Conditions
1. Authors retain all proprietary rights in any process, procedure, or article of manufacture described in the Work.
2. Authors may reproduce or authorize others to reproduce the Work or derivative works for the authors personal use or for company use, provided that the source and the UMB copyright notice are indicated, the copies are not used in any way that implies UMB endorsement of a product or service of any employer, and the copies themselves are not offered for sale.
3. Although authors are permitted to re-use all or portions of the Work in other works, this does not include granting third-party requests for reprinting, republishing, or other types of re-use.
