PDCA Method Implementation to Reduce the Potential Product Defects in the Automotive Components Industry
DOI:
https://doi.org/10.22441/ijiem.v4i2.19527Keywords:
Automotive components, Defect, PDCA, QualityAbstract
The research aim to reduce the potential for product defects in the automotive component industry by implementing Plan-Do-Check-Action (PDCA). The application of the PDCA method was carried out in an automotive component manufacturing company in Indonesia which produced SLJ 91 parts as a research object. The causes of the high number of product defects are known at the Plan stage from setting the theme of improvement to the root cause by using a fishbone diagram and 5W+1H analysis. In the Do stage, system improvements are implemented from the solutions generated by the 5W+1H analysis. The repair results are controlled to confirm the results of the repairs made. The corrective actions taken resulted in a reduction in product defects of 2.8% so that they were included in the maximum tolerance for the number of defects in the SLJ 91 part. Based on the results of data processing, analysis, and comparison between before and after implementation, it was found that the defect rate for SLJ 91 products was reduced from 10.8 % to 8%, a reduction in the percentage of 2.8% so that the product reaches the quality target it should be. The results of the repair had a direct impact on the type of dent defects, namely a decrease in the number of defects from 8.6% to 5.3%, so that there was a decrease of 3.3%. The results of the research are implemented and standardized in the action stage so that the improvements made can be maintained in the long term.Downloads
References
Abubakar, A. S., Zied, H., & Nyoungue, A. C. (2022). An optimal production, maintenance and quality problem, with improved statistical process chart of a supply chain under service and quality requirements. IFAC-PapersOnLine, 55(10), 1746–1751. https://doi.org/10.1016/j.ifacol.2022.09.650
Dahniar, T., Ibu, F. D., & Zulziar, M. (2022). IMPLEMENTASI KONSEP PDCA DAN SEVEN TOOLS UNTUK MENGURANGI REJECT PRODUK V-BELT DI PT. BANDO INDONESIA. Jurnal Ilmiah Teknik Dan Manajemen Industri, 5(1).
Garza-Reyes, J. A., Torres Romero, J., Govindan, K., Cherrafi, A., &
Ramanathan, U. (2018). A PDCA-based approach to Environmental Value Stream Mapping (E-VSM). Journal of Cleaner Production, 180, 335–348. https://doi.org/10.1016/j.jclepro.2018.01.121
Godina, R., Pimentel, C., Silva, F. J. G., & Matias, J. C. O. (2018). Improvement of the Statistical Process Control Certainty in an Automotive Manufacturing Unit. Procedia Manufacturing, 17, 729–736. https://doi.org/10.1016/j.promfg.2018.10.123
Huang, C. Y., Lee, D., Chen, S. C., & Tang, W. (2022). A Lean Manufacturing Progress Model and Implementation for SMEs in the Metal Products Industry. Processes, 10(5). https://doi.org/10.3390/pr10050835
Khaerudin, D., & Rahmatullah, A. (2020). Implementasi Metode Pdca Dalam Menurunkan Defect Sepatu Type Campus Di Pt. Prima Intereksa Indastri (Pin). Jurnal Sains Dan Teknologi: Jurnal Keilmuan Dan Aplikasi Teknologi Industri, 20(1), 34. https://doi.org/10.36275/stsp.v20i1.228
Kulkarni, T., Toksha, B., Shirsath, S., Pankade, S., & Autee, A. T. (2022). Construction and Praxis of Six Sigma DMAIC for Bearing Manufacturing Process. Materials Today: Proceedings, xxxx. https://doi.org/10.1016/j.matpr.2022.09.342
Kumar Singh, V., Kumar, R., Joshi, C. V., & Poddar, S. (2022). Improving operational performance with world class quality (WCQ) technique: A case in Indian automotive industry. Materials Today: Proceedings, xxxx. https://doi.org/10.1016/j.matpr.2022.09.387
Madanhire, I., & Mbohwa, C. (2016). Application of Statistical Process Control (SPC) in Manufacturing Industry in a Developing Country. Procedia CIRP, 40, 580–583. https://doi.org/10.1016/j.procir.2016.01.137
Manojkumar, S., & Kumar, M. (2021). Elimination of visor defects using 7 QC tools. Materials Today: Proceedings, 45, 8203–8206. https://doi.org/10.1016/j.matpr.2021.03.382
McKinsey&Company. (2016). Automotive Revolution & Perspective Towards 2030. In Auto Tech Review (Vol. 5, Issue 4). https://doi.org/10.1365/s40112-016-1117-8
Muhazir, A., Sinaga, Z., & Yusanto, A. A. (2020). Analisis Penurunan Defect Pada Proses Manufaktur Komponen Kendaraan Bermotor Dengan Metode Failure Mode and Effect Analysis (Fmea). Jurnal Kajian Teknik Mesin, 5(2), 66–77. https://doi.org/10.52447/jktm.v5i2.2955
Nabiilah, A. R., Hamedon, Z., & Faiz, M. T. (2018). Improving quality of light commercial vehicle using PDCA approach. Journal of Advanced Manufacturing Technology, 12(1 Special Issue 2), 525–534.
O’Connor, P. J., Moss, J., Adams, J., Matemberere, C., & Kaya, M. (2022). What drives consumer automobile choice? Investigating personality trait predictors of vehicle preference factors. Personality and Individual Differences, 184(April 2021), 111220. https://doi.org/10.1016/j.paid.2021.111220
Permana, H., Sulaiman, F., & Pramudita, M. (2021). Implementasi Metode Plan-Do-Check-Action (Pdca) Tulta Untuk Pengolahan Limbah Industri Minuman Ringan. Jurnal Integrasi Proses, 10(1), 27–36. http://jurnal.untirta.ac.id/index.php/jip
Prasojo, M., Giyanto, & Rahayu, M. (2020). Implementasi Metode PDCA Dan Seven Tools Untuk Pengendalian Kualitas Pada Produk Sheet Di PT. Kati Kartika Murni. JIMTEK: Jurnal Ilmiah Fakultas Teknik, 1(3), 195–210.
Ranade, P. B., Reddy, G., Koppal, P., Paithankar, A., & Shevale, S. (2020). Implementation of DMAIC methodology in green sand-casting process. Materials Today: Proceedings, 42, 500–507. https://doi.org/10.1016/j.matpr.2020.10.475
Rosa, C., Silva, F. J. G., & Ferreira, L. P. (2017). Improving the Quality and Productivity of Steel Wire-rope Assembly Lines for the Automotive Industry. Procedia Manufacturing, 11(June), 1035–1042. https://doi.org/10.1016/j.promfg.2017.07.214
Sumasto, F., Satria, P., & Rusmiati, E. (2022). Implementasi Pendekatan DMAIC untuk Quality Improvement pada Industri Manufaktur Kereta Api. Jurnal INTECH Teknik Industri Universitas Serang Raya, 8(2), 161–170. https://doi.org/doi.org/10.30656/intech.v8i2.4734
Sunadi, S., Purba, H. H., & Hasibuan, S. (2020). Implementation of statistical process control through pdca cycle to improve potential capability index of drop impact resistance: A case study at aluminum beverage and beer cans manufacturing industry in indonesia. Quality Innovation Prosperity, 24(1), 104–127. https://doi.org/10.12776/QIP.V24I1.1401
Sya’roni, M., & Suliantoro, H. (2017). Analisis Pengurangan Defect Produksi Dengan Menggunakan Metode Six Sigma Pada Unit Painting Smartphone Merk Polytron. Jurnal Teknik Indutri, 1–9.
Utami, S., & Djamal, A. H. (2018). Implementasi Pengendalian Kualitas Produk XX Kaplet Pada Proses Pengemasan Primer Dengan Penerapan Konsep PDCA. Jisi : Jurnal Integrasi Sistem Industri, 5(2), 101–110.
Wajdi, F., & Wiguna, D. (2015). Pengukuran Dan Intervensi Pengendalian Kualitas Pengelasan Blast Furnace Shell Dengan Metode Plant , Do , Check Action (PDCA). Jurnal Intench Teknik Industri, 15–23.
Zhou, F., Chen, T., Hai, P., Ma, P., & Pratap, S. (2021). Strategic quality improvement management practice for domestic automobile industry from the crucial outsourcing part perspective. Engineering Letters, 29(1), 253–260.
Downloads
Published
How to Cite
Issue
Section
License
The copyright to this article is transferred to Universitas Mercu Buana (UMB) if and when the article is accepted for publication. The undersigned hereby transfers any and all rights in and to the paper including without limitation all copyrights to UMB. The undersigned hereby represents and warrants that the paper is original and that he/she is the author of the paper, except for material that is clearly identified as to its original source, with permission notices from the copyright owners where required. The undersigned represents that he/she has the power and authority to make and execute this assignment.
We declare that:
1. This paper has not been published in the same form elsewhere.
2. It will not be submitted anywhere else for publication prior to acceptance/rejection by this Journal.
3. A copyright permission is obtained for materials published elsewhere and which require this permission for reproduction.
Furthermore, I/We hereby transfer the unlimited rights of publication of the above mentioned paper in whole to UMB. The copyright transfer covers the exclusive right to reproduce and distribute the article, including reprints, translations, photographic reproductions, microform, electronic form (offline, online) or any other reproductions of similar nature.
The corresponding author signs for and accepts responsibility for releasing this material on behalf of any and all co-authors. This agreement is to be signed by at least one of the authors who have obtained the assent of the co-author(s) where applicable. After submission of this agreement signed by the corresponding author, changes of authorship or in the order of the authors listed will not be accepted.
Retained Rights/Terms and Conditions
1. Authors retain all proprietary rights in any process, procedure, or article of manufacture described in the Work.
2. Authors may reproduce or authorize others to reproduce the Work or derivative works for the authors personal use or for company use, provided that the source and the UMB copyright notice are indicated, the copies are not used in any way that implies UMB endorsement of a product or service of any employer, and the copies themselves are not offered for sale.
3. Although authors are permitted to re-use all or portions of the Work in other works, this does not include granting third-party requests for reprinting, republishing, or other types of re-use.
