Synergizing QCC and PDCA Approaches to Foster Kaizen Practices in Wingbox Production at Karoseri
DOI:
https://doi.org/10.22441/ijiem.v5i2.22816Keywords:
Automotive parts, Kaizen, PDCA, QCC, Quality managementAbstract
This research applies the Quality Control Circle (QCC) method and the PDCA (Plan-Do-Check-Action) approach to overcome problems in hydraulic cylinder bracket mounts in a manufacturing company. At the "Plan" stage, a defect classification analysis, matrix diagram for problem classification, analysis of existing conditions, setting quality, cost, and morale targets, as well as Why-Why and 5W+1H analysis were conducted. At the "Do" stage, the cylinder bracket mounts was redesigned using UNP 5.4 material as a solution to the existing problems. At the "Check" stage, measurements of the improvement results were made to ensure the achievement of the planned targets, including the reduction of damage frequency and repair costs. The results of overcoming the problem of broken hydraulic cylinder bracket mounts showed a decrease in complaints during the 2-month period after implementation. The application of the QCC method and PDCA approach not only effectively addressed the problem, but also increased customer confidence, company sustainability, and worker morale. The next step is “Action” stage to ensure process continuity by standardizing through the creation of operation standards for the manufacture and installation of hydraulic cylinder bracket mounts. As a result, the material change from SPHC 6.0 to UNP 5.4 successfully resolved the damage problem and eliminated complaints within two months after implementation. After implementation, the company can reduce the cost expense of repair by IDR 1,413,510. This success had a positive impact on customer confidence, cost efficiency, and worker morale.Downloads
References
Annai Nashida, A., & Syahrullah, Y. (2021). Perbaikan Kualitas Pada Proses Produksi Kabel Type NYA dengan Metode Quality Control Circle (QCC) Pada Perusahaan Manufaktur Kabel di Banyumas. JURMATIS (Jurnal Manajemen Teknologi Dan Teknik Industri), 3(2), 147. https://doi.org/10.30737/jurmatis.v3i2.1792
Asiyah, D., Amilia, W., Wiyono, A. E., Suryaningrat, I. B., & Wibowo, Y. (2022). Efisiensi Biaya dengan Sistem PDCA Menggunakan Metode Quality control circle (QCC) di PT. XYZ Kabupaten Sidoarjo. Jurnal Rekayasa Dan Manajemen Agroindustri, 10(4), 531. https://doi.org/10.24843/jrma.2022.v10.i04.p14
Fahturizal, I. M. (2020). A Systematic Literature Review of Implementation Quality Control Circle in Manufacturing and Services Industries. IJIEM - Indonesian Journal of Industrial Engineering and Management, 1(3), 144. https://doi.org/10.22441/ijiem.v1i3.10232
Faiesal, Z., Hamzah, A., Rasib, A., Bin, Z. F., Rafaai, M., & Bin, A. H. (2018). Short Review of QCC (Quality Control Circle) Implementation toward Productivity Improvement: Case Study Operational performance measures View project Quality and Construction Management View project Short Review of QCC (Quality Control Circle) Implementat. International Journal of Engineering and Technical Research, 7(11), 68–72. www.ijert.org
Hernadewita, H., Herdiawan, D., Afriyuddin, A., & Hermiyetti, H. (2019). Implementation of the quality control circle for improvement of painting production in PT QWE. Journal of Applied Research on Industrial Engineering, 6(1), 16–25. https://doi.org/10.22105/JARIE.2019.169238.1074
Isniah, S., Hardi Purba, H., & Debora, F. (2020). Plan do check action (PDCA) method: literature review and research issues. Jurnal Sistem Dan Manajemen Industri, 4(1), 72–81. https://doi.org/10.30656/jsmi.v4i1.2186
Panjaitan, T. W. S., A. Y. A., D., & Yessicha, M. (2012). Minimalisasi Kekurangan Material melalui Implementasi Quality Control Circle. Jurnal Teknik Industri, 13(2), 101–106. https://doi.org/10.9744/jti.13.2.101-106
Ridwan, A., Ulfah, M., Sonda, A., & Arya, V. (2022). Pengendalian kualitas produksi roti menggunakan quality control circle. Journal Industrial Servicess, 7(2), 314. https://doi.org/10.36055/jiss.v7i2.14159
Riyanto, O. A. W. (2015). Implementasi Metode Quality Control Circle Untuk Menurunkan Tingkat Cacat Pada Produk Alloy Wheel. Journal of Engineering and Management Industial System, 3(2), 104–110. https://doi.org/10.21776/ub.jemis.2015.003.02.7
Rusman, & Prabowo, R. (2021). Penerapan Quality Control Circle dalam Memperbaiki Kualitas pada Proses Pengelasan Box Karoseri di PT. X. Seminar Nasional Teknologi INdustri Berkelanjutan I (SENASTITAN I), 495.
Saad, S. M., & Khamkham, M. A. (2018). Development of an Integrated Quality Management Conceptual Framework for Manufacturing Organisations. Procedia Manufacturing, 17, 587–594. https://doi.org/10.1016/j.promfg.2018.10.100
Setiawan, B., & Soediantono, D. (2022). Benefits of Quality Control Circle (QCC) and Proposed Applications in the Defense Industry: A Literature Review. International Journal of Social and Management Studies (Ijosmas), 3(4), 13–22.
Sulaeman, G. M. R., & Gusniar, I. N. (2023). Analisis Pengendalian Kualitas Menggunakan Metode Quality Control Circle pada Part JK6000 di PT. XYZ. Jurnal Serambi Engineering, 8(2), 5029–5036. https://doi.org/10.32672/jse.v8i2.5665
Sumasto, F, Imansuri, F., Agus, M., Safril, & Wirandi, M. (2020). Sustainable development impact of implementing electric taxis in Jakarta: A cost-benefit analysis. IOP Conference Series: Materials Science and Engineering, 885, 012027. https://doi.org/10.1088/1757-899x/885/1/012027
Sumasto, Fredy, Maharani, C. P., Purwojatmiko, B. H., Imansuri, F., & Aisyah, S. (2023). PDCA Method Implementation to Reduce the Potential Product Defects in the Automotive Components Industry. Indonesian Journal of Industrial Engineering & Management, 4(2), 87–98. https://doi.org/10.22441/ijiem.v4i2.19527
Sumasto, Fredy, Nugroho, Y. A., Purwojatmiko, B. H., Wirandi, M., Imansuri, F., & Aisyah, S. (2023). Implementation of Measurement System Analysis to Reduce Measurement Process Failures on Part Reinf BK6. Indonesian Journal of Industrial Engineering & Management, 4(2), 212–220. https://doi.org/10.22441/ijiem.v4i2.20212
Tambunan, S., Susilawati, A., & Yohanes, Y. (2020). Application of Quality Control Circle Method in Crusher Knife Reconditioning Products (Case Study in PT. Andritz Pekanbaru). Journal of Ocean, Mechanical and Aerospace -Science and Engineering- (JOMAse), 64(2), 52–58. https://doi.org/10.36842/jomase.v64i2.148
Taqwanur, & Suryawantiningtyas, M. B. (2022). Analisis Kecacatan Produk dengan Menggunakan Quality Control Circle dan Seven QC Tools di PT. ACI. G-Tech: Jurnal Teknologi Terapan, 6(2), 191–200. https://doi.org/10.33379/gtech.v6i2.1589
Zhang, D., Liao, M., & Liu, T. (2020). Implementation and promotion of quality control circle: A starter for quality improvement in chinese hospitals. Risk Management and Healthcare Policy, 13, 1215–1224. https://doi.org/10.2147/RMHP.S261998
Downloads
Published
How to Cite
Issue
Section
License
The copyright to this article is transferred to Universitas Mercu Buana (UMB) if and when the article is accepted for publication. The undersigned hereby transfers any and all rights in and to the paper including without limitation all copyrights to UMB. The undersigned hereby represents and warrants that the paper is original and that he/she is the author of the paper, except for material that is clearly identified as to its original source, with permission notices from the copyright owners where required. The undersigned represents that he/she has the power and authority to make and execute this assignment.
We declare that:
1. This paper has not been published in the same form elsewhere.
2. It will not be submitted anywhere else for publication prior to acceptance/rejection by this Journal.
3. A copyright permission is obtained for materials published elsewhere and which require this permission for reproduction.
Furthermore, I/We hereby transfer the unlimited rights of publication of the above mentioned paper in whole to UMB. The copyright transfer covers the exclusive right to reproduce and distribute the article, including reprints, translations, photographic reproductions, microform, electronic form (offline, online) or any other reproductions of similar nature.
The corresponding author signs for and accepts responsibility for releasing this material on behalf of any and all co-authors. This agreement is to be signed by at least one of the authors who have obtained the assent of the co-author(s) where applicable. After submission of this agreement signed by the corresponding author, changes of authorship or in the order of the authors listed will not be accepted.
Retained Rights/Terms and Conditions
1. Authors retain all proprietary rights in any process, procedure, or article of manufacture described in the Work.
2. Authors may reproduce or authorize others to reproduce the Work or derivative works for the authors personal use or for company use, provided that the source and the UMB copyright notice are indicated, the copies are not used in any way that implies UMB endorsement of a product or service of any employer, and the copies themselves are not offered for sale.
3. Although authors are permitted to re-use all or portions of the Work in other works, this does not include granting third-party requests for reprinting, republishing, or other types of re-use.
