Relayout of Palm Coconut Factories in West Sumatera
DOI:
https://doi.org/10.22441/ijiem.v4i2.19542Keywords:
Palm Oil Factories, Activity Relationship Chart, Relayout, West SumateraAbstract
One of the plantation companies and palm oil mills in West Sumatera is part of the group and makes a positive contribution. In one of the palm oil factories in West Sumatra, there is a problem with the flow of the work process, where there is an accumulation of products of different sizes in the factory area. This hinders the product transfer process. In addition, this situation will affect the use of the land area. Therefore, it is necessary to consider how to make or change the layout of facilities more effectively and efficiently. An activity Relationship Chart will be used as a method to make recommendations for the layout design of palm coconut factories. The flow of the crude palm oil production process from the proposed layout design weighs the car and bunches of fresh fruits before heading to isolation until the bunches of ripe fruits are stored in the storage tank before being transferred to the transport car. Based on the proposed layout redesign, the management of the oil palm mill can consider improving the placement of the area in the boiler station, as well as the placement of production not too far from the production process.Downloads
References
Al-Zubaidi, S. Q. D., Fantoni, G., & Failli, F. (2021). Analysis of drivers for solving facility layout problems: A Literature review. Journal of Industrial Information Integration, 21, 100187. https://doi.org/10.1016/j.jii.2020.100187
Arif, M. (2017). Perancangan Tata Letak Pabrik. Deepublish.
CHAERUL, A., ARIANTO, B., & BHIRAWA, W. T. (2021). Perancangan Ulang Tata Letak Fasilitas Di Cafe “Home 232” Cinere. Jurnal Teknik Industri, 8(2). https://doi.org/10.35968/jtin.v8i2.799
Durmusoglu, Z. D. (2018). A TOPSIS-based approach for sustainable layout design: activity relation chart evaluation. Kybernetes. https://doi.org/10.1108/K-02-2018-0056
Faishal, M., & Pratama, M. A. (2019). Perancangan ulang tata letak fasilitas perusahaan sandal hotel dengan metode ARC untuk mengurangi waste. Jurnal Teknologi, 12(2), 116-122.
Jamalludin, J., & Ramadhan, H. (2020). Metode Activity Relationship Chart (Arc) Untuk Analisis Perancangan Tata Letak Fasilitas Pada Bengkel Nusantara Depok. Bulletin of Applied Industrial Engineering Theory, 1(2)
Jaya, J. D., Nuryati, N., & Audinawati, S. A. N. (2017). Perancangan ulang tata letak fasilitas produksi UD. usaha berkah berdasarkan activity relationship chart (ARC) dengan aplikasi Blocplan-90. Jurnal Teknologi Agro-Industri, 4(2), 111-122. https://doi.org/10.34128/jtai.v4i2.56
Kramanandita, R. (2019). Praktek-Praktek Operasi Pabrik Berbasis Pembangunan Berkelanjutan Pada Industri Pengolahan Kelapa Sawit. Jurnal Ilmiah Teknologi Industri, 1(2).
Monga, R., & Khurana, V. (2015). Facility layout planning: a review. International Journal of Innovative Research in Science, Engineering and Technology, 4(3), 2347-6710. : https://doi.org/10.15680/IJIRSET.2015.0403027
Pramesti, M., Subagyo, H. S. H., & Aprilia, A. (2019). Perencanaan Ulang Tata Letak Fasilitas Produksi Keripik Nangka Dan Usulan Keselamatan Kesehatan Kerja (Studi Kasus Di Umkm Duta Fruit Chips, Kabupaten Malang). Agrisocionomics: Jurnal Sosial Ekonomi Pertanian, 3(2), 150-164. https://doi.org/10.14710/agrisocionomics.v3i2.5297
Pratiwi, I., Muslimah, E., & Aqil, A. W. (2012). Perancangan tata letak fasilitas di industri tahu menggunakan blocplan.
Ramadhan, D., Widodo, L., Gozali, L., Sukania, I. W., Daywin, F. J., & Doaly, C. O. (2020). Redesigning The Facility Layout With Systematic Layout Planning Method and Lean Manufacturing Approach On The Production Floor At PT. Baruna Trayindo Jaya.
Rosyidi, M. R. (2018). Analisa tata letak fasilitas produksi dengan metode ARC, ARD, dan AAD di PT. XYZ. WAKTU: Jurnal Teknik UNIPA, 16(1), 82-95. https://doi.org/10.36456/waktu.v16i1.1493
Safitri, N. D., Ilmi, Z., & Kadafi, M. A. (2017). Analisis perancangan tataletak fasilitas produksi menggunakan metode activity relationship chart (ARC). Jurnal Manajemen, 9(1), 38-47. https://doi.org/10.30872/jmmn.v9i1.2431
Suhardi, B., Juwita, E., & Astuti, R. D. (2019). Facility layout improvement in sewing department with Systematic Layout planning and ergonomics approach. Cogent Engineering, 6(1), 1597412. https://doi.org/10.1080/23311916.2019.1597412
Suminar, L. A., Wahyudin, W., & Nugraha, B. (2020). Analisis Perancangan Tata Letak Pabrik PT. Xyz Dengan Metode Activity Relationship Chart (ARC). J. Sains dan Teknol. J. Keilmuan dan Apl. Teknol. Ind, 20(2), 181
Yulistio, A., Basuki, M., & Azhari, A. (2022). Perancangan Ulang Tata Letak Display Retail Fashion Menggunakan Activity Relationship Chart (ARC). Jurnal Ilmiah Teknik Industri, 10(1), 21-30. https://doi.org/10.24912/jitiuntar.v10i1.9388
Downloads
Published
How to Cite
Issue
Section
License
The copyright to this article is transferred to Universitas Mercu Buana (UMB) if and when the article is accepted for publication. The undersigned hereby transfers any and all rights in and to the paper including without limitation all copyrights to UMB. The undersigned hereby represents and warrants that the paper is original and that he/she is the author of the paper, except for material that is clearly identified as to its original source, with permission notices from the copyright owners where required. The undersigned represents that he/she has the power and authority to make and execute this assignment.
We declare that:
1. This paper has not been published in the same form elsewhere.
2. It will not be submitted anywhere else for publication prior to acceptance/rejection by this Journal.
3. A copyright permission is obtained for materials published elsewhere and which require this permission for reproduction.
Furthermore, I/We hereby transfer the unlimited rights of publication of the above mentioned paper in whole to UMB. The copyright transfer covers the exclusive right to reproduce and distribute the article, including reprints, translations, photographic reproductions, microform, electronic form (offline, online) or any other reproductions of similar nature.
The corresponding author signs for and accepts responsibility for releasing this material on behalf of any and all co-authors. This agreement is to be signed by at least one of the authors who have obtained the assent of the co-author(s) where applicable. After submission of this agreement signed by the corresponding author, changes of authorship or in the order of the authors listed will not be accepted.
Retained Rights/Terms and Conditions
1. Authors retain all proprietary rights in any process, procedure, or article of manufacture described in the Work.
2. Authors may reproduce or authorize others to reproduce the Work or derivative works for the authors personal use or for company use, provided that the source and the UMB copyright notice are indicated, the copies are not used in any way that implies UMB endorsement of a product or service of any employer, and the copies themselves are not offered for sale.
3. Although authors are permitted to re-use all or portions of the Work in other works, this does not include granting third-party requests for reprinting, republishing, or other types of re-use.
