Analysis of Steel Plate Raw Material Supplier Selection on Rail Using Analytical Hierarchy Process (AHP) and Additive Ratio Assessment (ARAS) Methods at PT. XYZ
DOI:
https://doi.org/10.22441/ijiem.v4i3.20986Keywords:
Analytical hierarchy process, Additive ratio assessment, Supplier, SelectionAbstract
This study aims to select the best steel plate raw material suppliers at PT XYZ using the Analytical Hierarchy Process (AHP) and Additive Ratio Assessment (ARAS) methods. This research involves the process of collecting primary and secondary data which includes identifying criteria for selecting suppliers, collecting data for each criterion, and collecting performance data from suppliers. The results showed that the order of the best supplier of steel plate raw materials at PT XYZ with the largest value, that is, ranked 1st supplier of PT. Steel Kras with a K value of 0.195207, ranked 2nd supplier of PT. Jaraindo with a K value of 0.137696, ranked 3rd supplier of PT. Capris with a K value of 0.135158, ranks 4th supplier of PT. Kamaseta with a K value of 0.116481, ranks 5th supplier of PT. Wima Indo with a K value of 0.106039 and ranked 6th supplier of PT. Cenia Mandiri with a K value of 0.084586. Based on the AHP and ARAS methods, the relative weight of each criterion has been calculated, which helps in evaluating the best or potential suppliers to be selected. In addition, supplier rankings are also determined based on the resulting priority values.Downloads
References
Diana. (2018). Metode & Aplikasi Sistem Pendukung Keputusan. CV. Budi Utama.
Halimah, H., Kartini, D., Abadi, F., Budiman, I., & Muliadi, M. (2020). Uji Sensitivitas Metode Aras Dengan Pendekatan Metode Pembobotan Kriteria Sahnnon Entropy Dan Swara Pada Penyeleksian Calon Karyawan. Jurnal ELTIKOM, 4(2), 96–104. https://doi.org/10.31961/eltikom.v4i2.194
Hutagalung, J., Nofriansyah, D., & Syahdian, M. A. (2022). Penerimaan Bantuan Pangan Non Tunai (BPNT) Menggunakan Metode ARAS. Jurnal Media Informatika Budidarma, 6(1), 198. https://doi.org/10.30865/mib.v6i1.347
Kindangen, P., Debbie Palandeng, I., Ekonomi
dan Bisnis, F., & Manajemen Universitas Sam Ratulangi Manado, J. (2017). Analisis Manajemen Rantai Pasokan Spring Bed Pada Pt. Massindo Sinar Pratama Kota Manado (Analysis Supply Chain Management (Scm) Spring Bed At Pt. Massindo Sinar Pratama Kota Manado). Analisis SCM 901 Jurnal EMBA, 5(2), 893–900.
Limbong. (2020). Sistem Pendukung Keputusan: Metode & Implementasi. Yayasan Kita Menulis.
Ndruru, E. (2019). Pemanfaatan Sistem Pendukung Keputusan Dalam Seleksi PKW Terbaik Dengan Metode Aras Pada LPK2-Pascom Medan. Jurnal Informasi Logika, I(2), 26–34.
Pujawan, I. N. (2017). Sistem Pendukung Keputusan: Metode & Implementasi (G. Widya. & Rasjidin.R (eds.)). Diktat mata kuliah Perencanaan dan Pengendalian Produksi.
Pujotomo, D., Umaindra, M. A., & Wicaksono,
P. A. (2018). Perancangan Model Pemilihan Supplier Produk Cetakan Dengan Menggunakan Grey Based Topsis (Studi Kasus: Rumah Sakit Islam Sultan Agung Semarang). J@ti Undip : Jurnal Teknik Industri, 13(2), 99. https://doi.org/10.14710/jati.13.2.99-108
Ramdani, R. (2018). Prosiding Manajemen Analisis Pemilihan Pemasok Plate Sheet di PT. Dirgantara Indonesia dengan Menggunakan Metode AHP (Analitycal Hierachy Process) Analysis of Plate Sheet Supplier Selection at PT. Indonesian Aerospace Using AHP (Analitycal Hierachy Proces. Prosiding Manajemen, 4, 831–836.
Siahaya, W. (2013). Sukses Supply Chain Management Akses Demand Chain Management. in media.
Wardhana, D. A. K., & Prastawa, H. (2017). Analisis Pemilihan Supplier dengan Menggunakan Metode Analytical Hierarchy Process (Studi Kasus: UMKM Diana Bakery). E-Journal Undip, 18(1), 39–46.
Downloads
Published
How to Cite
Issue
Section
License
The copyright to this article is transferred to Universitas Mercu Buana (UMB) if and when the article is accepted for publication. The undersigned hereby transfers any and all rights in and to the paper including without limitation all copyrights to UMB. The undersigned hereby represents and warrants that the paper is original and that he/she is the author of the paper, except for material that is clearly identified as to its original source, with permission notices from the copyright owners where required. The undersigned represents that he/she has the power and authority to make and execute this assignment.
We declare that:
1. This paper has not been published in the same form elsewhere.
2. It will not be submitted anywhere else for publication prior to acceptance/rejection by this Journal.
3. A copyright permission is obtained for materials published elsewhere and which require this permission for reproduction.
Furthermore, I/We hereby transfer the unlimited rights of publication of the above mentioned paper in whole to UMB. The copyright transfer covers the exclusive right to reproduce and distribute the article, including reprints, translations, photographic reproductions, microform, electronic form (offline, online) or any other reproductions of similar nature.
The corresponding author signs for and accepts responsibility for releasing this material on behalf of any and all co-authors. This agreement is to be signed by at least one of the authors who have obtained the assent of the co-author(s) where applicable. After submission of this agreement signed by the corresponding author, changes of authorship or in the order of the authors listed will not be accepted.
Retained Rights/Terms and Conditions
1. Authors retain all proprietary rights in any process, procedure, or article of manufacture described in the Work.
2. Authors may reproduce or authorize others to reproduce the Work or derivative works for the authors personal use or for company use, provided that the source and the UMB copyright notice are indicated, the copies are not used in any way that implies UMB endorsement of a product or service of any employer, and the copies themselves are not offered for sale.
3. Although authors are permitted to re-use all or portions of the Work in other works, this does not include granting third-party requests for reprinting, republishing, or other types of re-use.
