Proposed Maintenance Plan for Maker Machinery with Reliability Centered Maintenance (RCM) Method and Maintenance Value Stream Mapping (MVSM) at PT. XYZ
DOI:
https://doi.org/10.22441/ijiem.v4i3.21445Keywords:
Reability, Maintenance, Downtime, MVSMAbstract
PT XYZ is a company engaged in cigarette production, where most of the production process uses automatic machines. The problem faced by the company is damage that occurs at any time before the scheduled maintenance interval causes overhaul and replacement or corrective maintenance activities which causes downtime and stops the production process on production machines that have a high average downtime compared to other machines. With these problems, calculations are carried out to obtain maintenance scheduling time intervals. The index of fit is used to measure how well the Weilbull distribution is based on the time to repair data. The fit index value (r) for the Hoper component downtime data is 0.92 or 92%, which means that the Hoper component downtime data can be completed using the Weilbull distribution. Calculation of the time to failure and time to repair parameters uses the Weilbull distribution by finding the intercept (a), gradient (b), shape parameter (α) and scale parameter (β). Calculation of the mean time to failure and mean time to repair using the results of parameter calculations using the Weilbull distribution based on the gamma table results in a mean time to failure of 1054.67 hours and a mean time to repair of 218.18 minutes. Calculation of the inspection time interval on the Hope component for 250 hours or 10 days per month. Analysis of maintenance efficiency using the maintenance value stream mapping approach obtained a maintenance efficiency percentage of 77.5%. Activities that provide added value have a longer time, namely 218.18 minutes. While activities that do not have added value is 63.2 minutes.Downloads
References
Ade, R., Rofi, S., Achmadi, F., Industri, M. T., & Industri, F. T. (2022). Strategi Perawatan pada Recompressor Cooler dengan Metode MVSM dan. Seminar Nasional Teknologi Industri Berkelanjutan II, 145–151.
Ahmad, Z. S., & Arsyad, M. (2018). Manajemen Perawatan. Deepublish Publisher.
Anardani, S., Setiawan, D., Mumtahana, H. A., Isnaini, W., & zainal, A. M. (2021). Teknologi Tepat Guna Berbasis Stem untuk Indonesia Tangguh. CV AE MEDIA GRAFIKA.
Dahniar, T. (2019). Pengendalian Mutu Produk Pada Industri Komponen Sepeda Motor Menuju Zero Defect Untuk Mencapai Optimalisasi Manufaktur. Pascal Books.
Fatma, N. F., Ponda, H., & Kuswara, R. A. (2020). Analisis Preventive Maintenance Dengan Metode Menghitung Mean Time Between Failure (MTBF) Dan Mean Time To Repair (MTTR) (Studi Kasus PT. Gajah Tunggal Tbk). Heuristic, 17(2), 87–94. https://doi.org/10.30996/heuristic.v17i2.4648
Felecia, & Limantoro, D. (2013). Total Productive Maintenance di PT. X. Jurnal Titra, 1(1), 13–20.
Kulsum, Febianti Evi, & H Supriatna Irpan. (2018). Usulan Waktu Preventive Maintenance Untuk Menurunkan Downtime Mesin Paper Mill 1 Dengan Reliability Block Diagram (Studi Kasus: PT Indah Kiat Pulp and Paper). Seminar Nasional Sains Dan Teknologi 2018, 1–8. jurnal.umj.ac.id/index.php/semnastek%0Ap-
Novianti, F., & Rochmoeljati, R. (2023). Quality Control of Edamame Products Using Statistical Quality Control (SQC) and Failure Mode Effect Analysis ( FMEA ) Methods in PT. XYZ. IJIEM (Indonesian Journal of Industrial Engineering & Management), 4(2), 221–230. https://doi.org/10.22441/ijiem.v4i2.20550
Raharja, I. P., Suardika, I. B., & Galuh W, H. (2021). Analisis Sistem Perawatan Mesin Bubut Menggunakan Metode Rcm (Reliability Centered Maintenance) Di Cv. Jaya Perkasa Teknik. Industri Inovatif : Jurnal Teknik Industri, 11(1), 39–48. https://doi.org/10.36040/industri.v11i1.3414
Setiawan, A., Aritonang, Y. M. K., & Iskandar, C. (2013). Penerapan Metode Reliability Centered Maintenance (RCM) untuk Menentukan Strategi Perawatan Fasilitas Produksi Kain. Jurnal Telematika, 8(1), 121–127. https://doi.org/10.61769/jurtel.v8i1.64
Sukopriyatno, A., Rahayuningsih, S., & Komari, A. (2019). Perancangan Penjadwalan Perawatan Mesin Bubut Dengan Metode Reliability Centered Maintenance (Rcm) Di Bengkel Pemesinan Smk Negeri 1 Kediri. JURMATIS : Jurnal Ilmiah Mahasiswa Teknik Industri, 1(1), 13. https://doi.org/10.30737/jurmatis.v1i1.291
Wahyudin, Herwanto, D., Debora, F., Julianto, O., & Rizal, M. (2023). Usulan Perbaikan Kualitas Produk Cacat pada Mesin SSW Menggunakan Metode Failure Mode and Effect Analysis ( FMEA ). Prosiding Seminar Nasional Teknik Industri (SENASTI) 2023, 196–204. https://ojs.uajy.ac.id/index.php/SENASTI/article/view/7942
Downloads
Published
How to Cite
Issue
Section
License
The copyright to this article is transferred to Universitas Mercu Buana (UMB) if and when the article is accepted for publication. The undersigned hereby transfers any and all rights in and to the paper including without limitation all copyrights to UMB. The undersigned hereby represents and warrants that the paper is original and that he/she is the author of the paper, except for material that is clearly identified as to its original source, with permission notices from the copyright owners where required. The undersigned represents that he/she has the power and authority to make and execute this assignment.
We declare that:
1. This paper has not been published in the same form elsewhere.
2. It will not be submitted anywhere else for publication prior to acceptance/rejection by this Journal.
3. A copyright permission is obtained for materials published elsewhere and which require this permission for reproduction.
Furthermore, I/We hereby transfer the unlimited rights of publication of the above mentioned paper in whole to UMB. The copyright transfer covers the exclusive right to reproduce and distribute the article, including reprints, translations, photographic reproductions, microform, electronic form (offline, online) or any other reproductions of similar nature.
The corresponding author signs for and accepts responsibility for releasing this material on behalf of any and all co-authors. This agreement is to be signed by at least one of the authors who have obtained the assent of the co-author(s) where applicable. After submission of this agreement signed by the corresponding author, changes of authorship or in the order of the authors listed will not be accepted.
Retained Rights/Terms and Conditions
1. Authors retain all proprietary rights in any process, procedure, or article of manufacture described in the Work.
2. Authors may reproduce or authorize others to reproduce the Work or derivative works for the authors personal use or for company use, provided that the source and the UMB copyright notice are indicated, the copies are not used in any way that implies UMB endorsement of a product or service of any employer, and the copies themselves are not offered for sale.
3. Although authors are permitted to re-use all or portions of the Work in other works, this does not include granting third-party requests for reprinting, republishing, or other types of re-use.
