Analysis of the Potential Hazards of Work Accidents Department of Production Using Failure Mode Effect Analysis (FMEA) and Fault Tree Analysis (FTA) Methods in PT. XYZ
DOI:
https://doi.org/10.22441/ijiem.v4i3.21005Keywords:
Work accident, Potential hazards, FMEA, FTAAbstract
PT. XYZ is a company engaged in the business of white crystal sugar with raw sugar cane in Jombang. As the industrial world develops, companies are required to produce products both in terms of quality and quantity. Therefore, the production process has the potential to experience work accidents. To minimize this from happening, this research identified the potential hazards of work accidents in the production division. The methods used are the Failure Mode Effect Analysis (FMEA) and Fault Tree Analysis (FTA) methods. Using the FMEA method produced 3 potential hazards with the highest RPN values namely potential for exposed hot ashes at the boiler station with an RPN of 33,716. In second place is the potential collapse of the crane at the mill station with RPN 27,192. Then in third place is the potential Explosion of pipes and tanks at the evaporation station with an RPN value of 23.549. With the FTA method, the 3 potential hazards that have been obtained are used as top events and an analysis is carried out to find out the root causes of the potential accidents that occur. The analysis is grouped from human, equipment, and environmental aspects. From the human factor, it is known that the cause was workers who were not concentrating, were negligent, and did not comply with SOPs. The equipment factor comes from the age of the old tool and lack of maintenance. As well as environmental factors, namely high temperature pressure and humidity which can have an impact on corrosion of iron equipment. So that the suggestions that can be given to companies are imposing sanctions on employees who do not comply with the rules, providing job training according to their respective fields, and scheduling regular machine maintenance.Downloads
References
Adityanto, M. H., Nu’man, A. H., & As’ad, N. R. (2019). Perbaikan Kualitas Produk Meja Komputer Menggunakan Metode Fault Tree Analysis (FTA) Dan Failure Mode and Effects Analysis (FMEA) di Home Industry Iyan Meubel. Prosiding Teknik Industri, 0(0), 154–160. https://karyailmiah.unisba.ac.id/index.php/industri/article/view/15799
Aprilliani, C., Fatma, F., Syaputri, D., Marganda, S., Manalu, H., Lukman, S., Risnawati, H., Muhammad Roy Asrori Dame, T., Simangunsong, E., Mahda, C., Arina, K., Romas, N., & Firdaus, L. S. (2022). KESELAMATAN DAN KESEHATAN KERJA (K3). PT Global Ekseskutif Teknologi. www.globaleksekutifteknologi.co.id
Bukhori, M., & Sholihin, Y. M. (2021). Usulan Penurunan Tingkat Kecelakaan Kerja Dengan Menerapkan Metode FMEA dan FTA pada PT Jagat Interindo. Jurnal Rekayasa Dan Optimasi Sistem Industri, 03(1), 20–24.
Ekoanindiyo, F. A., Yohanes, A., Prihastono, E., & Hayati, E. N. (2021). PENDEKATAN METODE FAULT TREE ANALYSIS DALAM KESEHATAN DAN KESELAMATAN KERJA SERTA PENGARUHNYA TERHADAP PRODUKTIFITAS. Jurnal Rekayasa Sistem Industri, 7(1), 20–25. https://ejournal.upbatam.ac.id/index.php/rsi/article/view/firman_v7i1/firman_v7i1
Gianata, P., Hutabarat, J., & Soemanto. (2020). ANALISA POTENSI BAHAYA DAN PERBAIKAN SISTEM KESELAMATAN DAN KESEHATAN KERJA MENGGUNAKAN METODE HIRARCDI PT. BOMA BISMA INDRA. Jurnal Valtech (Jurnal Mahasiswa Teknik Industri), Vol 3, 106–110. https://ejournal.itn.ac.id/index.php/valtech/article/view/2761/2249
Ihsan, A. F., & Nurcahyo, C. B. (2022). Analisis Risiko Kecelakaan Kerja Menggunakan Metode FMEA pada Proyek Pembangunan Jalan Tol Ruas Sigli – Banda Aceh Struktur Elevated. Jurnal Teknik ITS49, 11(1), 49–55.
Mahawati, E., Fitriyatinur, Q., Yanti, C. A., Rahayu, P. P., Aprilliani, C., Chaerul, M., Hartini, E., Sari, M., Marzuki, I., Sitorus, E., Jamaludin, & Susilawaty, A. (2021). Keselamatan Kerja dan Kesehatan Lingkungan Industri. In Yayasan Kita Menulis.
Redjeki, S. (2016). KESEHATAN DAN KESELAMATAN KERJA. Pusdik SDM Kesehatan. http://202.70.136.161:8107/485/1/Kesehatan-dan-Keselamatan-Kerja-Komprehensif.pdf
Rizal, M., Jufriyanto, M., & Rizqi, A. W. (2022). ANALISIS RISIKO KECELAKAAN KERJA DENGAN METODE FAILURE MODE AND EFFECT ANALYSIS (FMEA) (Studi Kasus: Pekerja Project Economizer, Tangki Scrubber dan Draiyer di Bengkel Fabrikasi PT. Petrokimia Gresik). Jurnal Sains, Teknologi Dan Industri, 20(1), 156–165.
Setyaningsih, R. (2021). ANALISIS SISTEM KESELAMATAN DAN KESEHATAN KERJA DALAM MENINGKATKAN PRODUKTIVITAS KERJA DENGAN PENDEKATAN FAULT TREE ANALYSIS (Studi Kasus Di PT. Pijar Sukma). Universitas Islam Nahdlatul Ulama.
Simarmata, J., Makbul, R., Mansida, A., Amsah, L. O. M. Y., Rachim, F., Dharmawan, V., Bachtiar, E., Sumantrie, P., Simbolon, S., Erdawaty, Muadzah, & Della, R. H. (2022). Keselamatan dan Kesehatan Kerja. Yayasan Kita Menulis.
Triyono, M. B., Ismara, K. I., Slamet, Hargiyanto, P., Solikhin, M., Yuniarti, N., Sugiyono, L, B., Khayati, E. Z., Jatmiko, R. D., Fatah, A., Wulandari, B., Hidayat, N., & Wahyuni, I. (2014). Keselamatan dan Kesehatan Kerja (K3). Universitas Negeri Yogyakarta. http://staffnew.uny.ac.id/upload/198812242014042002/pendidikan/Buku%20K3%20FT%20UNY.pdf
Umniyyah, A., Irkas, D., Fitri, A. M., Anggraeni, A., Purbasari, D., & Pristya, T. Y. R. (2020). Hubungan Unsafe Action dan Unsafe Condition dengan Kecelakaan Kerja pada Pekerja Industri Mebel The Relationship between Unsafe Action and Unsafe Condition with Work Accidents in Furniture Industry Workers. In Jurnal Kesehatan (Vol. 11, Issue 3). Online. http://ejurnal.poltekkes-tjk.ac.id/index.php/JK
Wahyuningsih, U., Sulistyo, E., Rusjdi, H., Alfalah, W., Sudirmanto, S., & Prabowo, E. (2021). Pengenalan Keselamatan Dan Kesehatan Kerja Di PT Cita Rasa Palembang. Jurnal Pengabdian Pada Masyarakat Menerangi Negeri, 3(2), 155–162. https://doi.org/10.33322/terang.v3i2.431
Wibisono, K. (2021). ANALISIS KETERLAMBATAN PROYEK FISCAL METERING DENGAN MENGGUNAKAN METODE FAULT TREE ANALYSIS PADA PT. XYZ. Institut Teknologi Sepuluh Nopember.
Downloads
Published
How to Cite
Issue
Section
License
The copyright to this article is transferred to Universitas Mercu Buana (UMB) if and when the article is accepted for publication. The undersigned hereby transfers any and all rights in and to the paper including without limitation all copyrights to UMB. The undersigned hereby represents and warrants that the paper is original and that he/she is the author of the paper, except for material that is clearly identified as to its original source, with permission notices from the copyright owners where required. The undersigned represents that he/she has the power and authority to make and execute this assignment.
We declare that:
1. This paper has not been published in the same form elsewhere.
2. It will not be submitted anywhere else for publication prior to acceptance/rejection by this Journal.
3. A copyright permission is obtained for materials published elsewhere and which require this permission for reproduction.
Furthermore, I/We hereby transfer the unlimited rights of publication of the above mentioned paper in whole to UMB. The copyright transfer covers the exclusive right to reproduce and distribute the article, including reprints, translations, photographic reproductions, microform, electronic form (offline, online) or any other reproductions of similar nature.
The corresponding author signs for and accepts responsibility for releasing this material on behalf of any and all co-authors. This agreement is to be signed by at least one of the authors who have obtained the assent of the co-author(s) where applicable. After submission of this agreement signed by the corresponding author, changes of authorship or in the order of the authors listed will not be accepted.
Retained Rights/Terms and Conditions
1. Authors retain all proprietary rights in any process, procedure, or article of manufacture described in the Work.
2. Authors may reproduce or authorize others to reproduce the Work or derivative works for the authors personal use or for company use, provided that the source and the UMB copyright notice are indicated, the copies are not used in any way that implies UMB endorsement of a product or service of any employer, and the copies themselves are not offered for sale.
3. Although authors are permitted to re-use all or portions of the Work in other works, this does not include granting third-party requests for reprinting, republishing, or other types of re-use.
