Paper Distribution Route Optimization Using Ant Colony Method at PT. XY
DOI:
https://doi.org/10.22441/ijiem.v5i2.22356Keywords:
Distribution, Distance, Time, Ant colony optimizationAbstract
In distributing their products, companies need to determine distribution routes to optimize the distanceof distribution process and minimize losses, such as distribution by PT. XY is carried out randomly without regard to the location betweenthe customers to be addressed, so that the distance and time taken is excessive resulting in a lot of costs to be incurred. Therefore, planning needs to be done to optimize the distance and time of distribution. The purpose of this study was to determine the paper distribution routes at PT. XY so that the distance and travel time traveled are much more optimal by using the Ant Colony Optimization method. Based on research, the distribution of PT. XY using the Ant Colony Optimization method obtained more optimal results than using the company's initial route design. The total route distance was originally 423.4 km to 310.4 km, and the original total time was 695 minutes to 554 minutes. So it was concluded that there was a total route distance saving of 113 km and a distribution time of 141 minutes. Thus, in the distribution process at PT. XY with the application of this method can minimize costs that must be incurred by the company.Downloads
References
Arifian, R., & Pulansari, F. (2023). Determination of the Shortest Distribution Routes to Minimize Fuel Consumption and CO2 Emission Using Sweep and Clarke & Wright Saving Algorithms. IJIEM - Indonesian Journal of Industrial Engineering and Management, 4(2), Article 2. https://doi.org/10.22441/ijiem.v4i2.20493
Bimantara, W., Rahayudi, B., & Cholissodin, I. (2021). Optimasi Rute Distribusi Produk PT Indomarco Adi Prima (Stock Point Nganjuk) Dengan Algoritma K-Means Dan Ant Colony Optimization (KACO). Jurnal Pengembangan Teknologi Informasi dan Ilmu Komputer, 5(6), 2426–2434. https://j-ptiik.ub.ac.id/index.php/j-ptiik/article/view/9347
Eraniola, G., & Suhendar, E. (2021). Menentukan Rute Kendaraan PT. Sarana Cahaya Makmur Metode Algoritma Ant Colony Optimization. IKRA-ITH Teknologi Jurnal Sains Dan Teknologi, 5(1), Article 1. https://journals.upi-yai.ac.id/index.php/ikraith-teknologi/article/view/904
Hasna, A. A., Rahayudi, B., & Widodo, A. W. (2021). Optimasi Rute Distribusi Produk Minuman dan Makanan pada Distributor Nestle (CV Forward Kediri) dengan Algoritma Ant Colony Optimization. Jurnal Pengembangan Teknologi Informasi dan Ilmu Komputer, 5(7), 2918–2924. https://j-ptiik.ub.ac.id/index.php/j-ptiik/article/view/9439
Karundeng, T. N., Mandey, S. L., & Sumarauw, J. S. B. (2018). Analisis Saluran Distribusi Kayu (Studi Kasus di CV. Karya Abadi, Manado). Jurnal EMBA : Jurnal Riset Ekonomi, Manajemen, Bisnis Dan Akuntansi, 6(3), Article 3. https://doi.org/10.35794/emba.v6i3.20444
Manuputty, D. E. A., Montolalu, C. E. J. C., & Manurung, T. (2021). Penentuan Jalur Terpendek Distribusi Air Mineral Menggunakan Ant Colony Optimization. d’Cartesian: Jurnal Matematika dan Aplikasi, 10(2), 76–82. https://doi.org/10.35799/dc.10.2.2021.34987
Nurharyanto, & Perdana, S. (2021). Menentukan Rute Distribusi Di PT Sinar Harapan Plastik Dengan Metode Algoritma Ant Colony Optimization. Jurnal IKRA-ITH TEKNOLOGI, 5(1). https://journals.upi-yai.ac.id/index.php/ikraith-teknologi/article/view/905
Perindustrian, K. (2021). Mungkinkah Peran Industri Bersandar pada Industri Pulp dan Paper? Buku Analisis Pembangunan Industri (Edisi IV - 2021) (IV). Pusdatin Kemenperin.
Purnomo, H. D. (2014). Cara Mudah Belajar Metode Metaheuristik Menggunakan Matlab. Gava Media.
Risqiyanti, V., Yasin, H., & Santoso, R. (2019). Pencarian Jalur Terpendek Menggunakan Metode Algoritma “Ant Colony Optimization” Pada GUI Matlab (Studi Kasus: PT Distriversa Buana Mas cabang Purwokerto). Jurnal Gaussian, 8(2), 272–284. https://doi.org/10.14710/j.gauss.v8i2.26671
Sahir, S. H. (2021). Metodologi Penelitian. Penerbit Kbm Indonesia.
Silalahi, B. P., Fathiah, N., & Supriyo, P. T. (2019). Use of Ant Colony Optimization Algorithm for Determining Traveling Salesman Problem Routes. Jurnal Matematika MANTIK, 5(2), 100–111. https://doi.org/10.15642/mantik.2019.5.2.100-111
Subagyo, Masruroh, N. A., & Bastian, I. (2018). Akuntansi Manajemen Berbasis Desain. UGM PRESS.
Tegar, N. (2019). Panduan Lengkap Manajemen Distribusi. Anak Hebat Indonesia.
Lasmana. (2021). Transportation Method in Linear Programming for Goods Distribution. Jurnal Matematika Vol 20. No 1, 35–41.
Downloads
Published
How to Cite
Issue
Section
License
The copyright to this article is transferred to Universitas Mercu Buana (UMB) if and when the article is accepted for publication. The undersigned hereby transfers any and all rights in and to the paper including without limitation all copyrights to UMB. The undersigned hereby represents and warrants that the paper is original and that he/she is the author of the paper, except for material that is clearly identified as to its original source, with permission notices from the copyright owners where required. The undersigned represents that he/she has the power and authority to make and execute this assignment.
We declare that:
1. This paper has not been published in the same form elsewhere.
2. It will not be submitted anywhere else for publication prior to acceptance/rejection by this Journal.
3. A copyright permission is obtained for materials published elsewhere and which require this permission for reproduction.
Furthermore, I/We hereby transfer the unlimited rights of publication of the above mentioned paper in whole to UMB. The copyright transfer covers the exclusive right to reproduce and distribute the article, including reprints, translations, photographic reproductions, microform, electronic form (offline, online) or any other reproductions of similar nature.
The corresponding author signs for and accepts responsibility for releasing this material on behalf of any and all co-authors. This agreement is to be signed by at least one of the authors who have obtained the assent of the co-author(s) where applicable. After submission of this agreement signed by the corresponding author, changes of authorship or in the order of the authors listed will not be accepted.
Retained Rights/Terms and Conditions
1. Authors retain all proprietary rights in any process, procedure, or article of manufacture described in the Work.
2. Authors may reproduce or authorize others to reproduce the Work or derivative works for the authors personal use or for company use, provided that the source and the UMB copyright notice are indicated, the copies are not used in any way that implies UMB endorsement of a product or service of any employer, and the copies themselves are not offered for sale.
3. Although authors are permitted to re-use all or portions of the Work in other works, this does not include granting third-party requests for reprinting, republishing, or other types of re-use.
