CRAFT Method to Minimize Material Handling Cost in Automotive Component Industry
DOI:
https://doi.org/10.22441/ijiem.v6i3.25388Keywords:
CRAFT, Material handling, Cost, LayoutAbstract
In automotive component manufacturing, an efficient plant layout minimizes material handling costs (MFCs). The problem is the high material handling costs for the production of 2DIN Radio Bracket MK 56660 at PT XYZ because it is produced at two factories, Factory 1 and Factory 9, which are pretty far apart. Using the Computerized Relative Facility Allocation Technique (CRAFT), this study aims to optimize the plant layout by exploring alternative configurations that facilitate cost-effective material handling. The initial assessment of the 2DIN Radio Bracket MK 56660 layout revealed a material transfer cost. Applying the CRAFT method, two different alternative proposals for layout improvement emerged. The first alternative showed a reduction in material transfer costs of IDR 476.11. In contrast, the second alternative resulted in a slightly higher cost of IDR 476.21. The study findings concluded that the first alternative, with the lowest cost of IDR 476.11, is the preferred choice to improve the plant layout and minimize MMF. This study provides practical insights into plant layout optimization in the automotive component industry and underscores the effectiveness of the CRAFT method in identifying cost-effective solutions to material handling challenges.Downloads
References
Adiasa, I., Suarantalla, R., Rafi, M. S., & Hermanto, K. (2020). Perancangan Ulang Tata Letak Fasilitas Pabrik Di CV. Apindo Brother Sukses Menggunakan Metode Systematic Layout Planning (SLP). Performa: Media Ilmiah Teknik Industri, 19(2), 151–158. https://doi.org/10.20961/Performa.19.2.43467
Amrullah, M., Tajuddin, T., & Rachmadhani, M. M. (2022). Usulan Penataan Lahan Kontener Dengan Metode Craft Pada PT Spil Sorong. Industrial Engineering Journal – System. 01(1), 22–32. https://doi.org/10.33506/system.v1i1.1968
Baladraf, T. T., Fitri Salsabila, N. S., Harisah, D., & Sudarmono, T. R. (2021). Evaluasi Dan Perancangan Tata Letak Fasilitas Produksi Menggunakan Metode Analisis Craft (Studi Kasus Pabrik Pembuatan Bakso Jalan Brenggolo Kediri). Jurnal Rekayasa Industri (JRI), 3(1), 12–20. https://doi.org/10.37631/Jri.V3i1.287
Chaerul, A., Arianto, B., & Bhirawa, D. A. N. W. (2019). Perancangan Ulang Tata Letak Fasilitas Di Cafe “Home 232” Cinere. Jurnal Teknik Industri, 8(2), 142–158. https://journal.universitassuryadarma.ac.id/index.php/jtin/article/view/799/780
Darsini, Adji, S., & Wijianto. (2023). Jurnal Muhammadiyah Relative Allocation Of Facilities Techniques) Pada Pabrik. 4(1).
Fajri, A. (2021). Perancangan Tata Letak Gudang Dengan Metode Systematic Layout Planning. Jurnal Teknik Industri, 7(1), 1–10. http://dx.doi.org/10.24014/jti.v7i1.10533
Febianti, E., Kulsum, K., Dan Pradifta, D. (2020). Relayout Gudang Bahan Baku Dengan Menggunakan Metode CORELAP Dan CRAFT Di PT. XYZ. Journal Industrial Servicess, 6(1), 78-85. Http://Dx.Doi.Org/10.36055/Jiss.V6i1.9481
Imon, G. L., Elim, I., & Gerungai, N. Y. T. (2020). The Evaluation of Application of the Depreciation Method For Fixed Asset at PT. Wahana Wirawan Manado-Nissan Datsun Martadinata. Jurnal EMBA: Jurnal Riset Ekonomi, Manajemen, Bisnis Dan Akuntansi, 8(17), 549–561. Https://Doi.Org/10.35794/Emba.V8i4.30900
Islaha, A. F., & Cahyana, A. S. (2017). Upaya Peningkatan Produktivitas Dengan Meminimasi Waste Menggunakan From To Chart (FTC). PROZIMA (Productivity, Optimization and Manufacturing System Engineering), 1(2), 107–115. Https://Doi.Org/10.21070/Prozima.V1i2.1289
Jamalludin, Fauzi, A., & Ramadhan, H. (2020). Metode Activity Relationship Chart (ARC) Untuk Analisis Perancangan Tata Letak Fasilitas Pada Bengkel Nusantara Depok. Bulletin Of Applied Industrial Engineering Theory, 2(1), 20–22. Https://Jim.Unindra.Ac.Id/Index.Php/Baiet/Article/View/2836
Kholifah U, S., Suhartini, S. (2021). Perancangan Ulang Tata Letak Fasilitas Produksi Dengan Metode Systematic Layout Planning Dan BLOCPLAN Untuk Meminimasi Biaya Material Handling Pada UD. Sofi Garmen. Journal Of Research And Technology, 7(2), 151–162. Https://Doi.Org/10.55732/Jrt.V7i2.556
Mardjani, A. C., Kalangi, L., & Lambey, R. (2015). Keuangan Dan Peraturan Perpajakan Pengaruhnya Terhadap Laporan Keuangan Pada PT. Hutama Karya Manado. Jurnal EMBA: Jurnal Riset Ekonomi, Manajemen, Bisnis Dan Akuntansi, 3(1), 1024–1033. Https://Doi.Org/10.35794/Emba.3.1.2015.7807
Padhil, A., Pawennari, A., Alisyahbana, T., & Firman, F. (2021). Perancangan Ulang Tata Letak Fasilitas Produksi Menggunakan Metode Algoritma Craft Pada PT. Sermani Steel Makassar. Jurnal Rekayasa Sistem Industri, 7(1), 14–19. Https://Doi.Org/10.33884/Jrsi.V7i1.4496
Pramesti, M., Subagyo, H. S. H., & Aprilia, A. (2019). Perencanaan Ulang Tata Letak Fasilitas Produksi Keripik Nangka Dan Usulan Keselamatan Kesehatan Kerja (Studi Kasus Di Umkm Duta Fruit Chips, Kabupaten Malang). Agrisocionomics: Jurnal Sosial Ekonomi Pertanian, 3(2), 150–164. Https://Doi.Org/10.14710/Agrisocionomics.V3i2.5297
Ramdan, L. D., Arianto, B., & Bhirawa, W. T. (2021). Perancangan Ulang Tata Letak Pusat Pemeliharaan Bus Transjakarta Dengan Metode Activity Relationship Chart Untuk Meningkatkan Efektivitas Dan Efisiensi Kerja Pada PT. Citrakarya Pranata. Jurnal Teknik Industri, 9(2), 105–115. Https://Journal.Universitassuryadarma.Ac.Id/Index.Php/Jtin/Article/View/642
Riswanda, J. I. (2018). Evaluasi Tata Letak Dengan Mengguakan Metode CRAFT Untuk Meningkatkan Efisiensi (Studi Kasus Di Gudang Obat 1 Depo Farmasi RSUD DR. Saiful Anwar). Journal Of Chemical Information And Modeling, 53(9), 1689–1699. Https://Jimfeb.Ub.Ac.Id/Index.Php/Jimfeb/Article/View/5284/4648
Safitri, N. D., Ilmi, Z., & Amin, M. (2018). Analisis Perancangan Tataletak Fasilitas Produksi Menggunakan Metode Activity Relationship Chart (ARC). Jurnal Manajemen, 9(1), 38. Https://Doi.Org/10.29264/Jmmn.V9i1.2431
Setiawannie, Y., Marikena, N., Yudha Pratama, A., & Utama, P. (2022). The Effect Of Facility Layout Improvement On The Production Process At PT. X. Agustus, 3(2), 140–150. Https://Upu-Journal.Potensi-Utama.Org/Index.Php/IESM/Article/Download/1261/891
Sihombing M. F. (2016). Analisis Penerapan Metode Penyusutan Aktiva Tetap Dan Implikasinya Terhadap Laba Perusahaan Pada PT. Manado Persada Madani. Jurnal EMBA: Jurnal Riset Ekonomi, Manajemen, Bisnis Dan Akuntansi, 632(2), 632–639. Https://Doi.Org/10.35794/Emba.4.2.2016.13119
Simanjuntak, R. A., Asih, E. W., & Winardi, F. (2022). Usulan Perbaikan Tata Letak Fasilitas Produksi Kayu Olahan Menggunakan Metode Activity Relationship Chart, Craft dan From To Chart. Prosiding SNAST 2022. https://Doi.Org/10.34151/Prosidingsnast.V8i1
Supriyadi, S., Setiawan, D., & Cahyadi, D. (2019). Perancangan Ulang Tata Letak Pabrik Menggunakan Metode Algoritma Computerized Relative Allocation of Facilities Techniques (CRAFT). Jurnal INTECH Teknik Industri Universitas Serang Raya, 5(2), 75–80. https://doi.org/10.30656/intech.v5i2.1820
Tahir, S., & dan Sayed Baidhawi, S. (2015). Usulan Perbaikan Tata Letak Fasilitas dengan Menggunakan Algoritma CRAFT. Malikussaleh Industrial Engineering Journal, 4(2), 36–41. https://doi.org/10.53912/iejm.v4i2.111
Downloads
Published
How to Cite
Issue
Section
License
The copyright to this article is transferred to Universitas Mercu Buana (UMB) if and when the article is accepted for publication. The undersigned hereby transfers any and all rights in and to the paper including without limitation all copyrights to UMB. The undersigned hereby represents and warrants that the paper is original and that he/she is the author of the paper, except for material that is clearly identified as to its original source, with permission notices from the copyright owners where required. The undersigned represents that he/she has the power and authority to make and execute this assignment.
We declare that:
1. This paper has not been published in the same form elsewhere.
2. It will not be submitted anywhere else for publication prior to acceptance/rejection by this Journal.
3. A copyright permission is obtained for materials published elsewhere and which require this permission for reproduction.
Furthermore, I/We hereby transfer the unlimited rights of publication of the above mentioned paper in whole to UMB. The copyright transfer covers the exclusive right to reproduce and distribute the article, including reprints, translations, photographic reproductions, microform, electronic form (offline, online) or any other reproductions of similar nature.
The corresponding author signs for and accepts responsibility for releasing this material on behalf of any and all co-authors. This agreement is to be signed by at least one of the authors who have obtained the assent of the co-author(s) where applicable. After submission of this agreement signed by the corresponding author, changes of authorship or in the order of the authors listed will not be accepted.
Retained Rights/Terms and Conditions
1. Authors retain all proprietary rights in any process, procedure, or article of manufacture described in the Work.
2. Authors may reproduce or authorize others to reproduce the Work or derivative works for the authors personal use or for company use, provided that the source and the UMB copyright notice are indicated, the copies are not used in any way that implies UMB endorsement of a product or service of any employer, and the copies themselves are not offered for sale.
3. Although authors are permitted to re-use all or portions of the Work in other works, this does not include granting third-party requests for reprinting, republishing, or other types of re-use.
