Facility Layout Design of Mr. Budi's Tofu Factory Using the HIRARC Method and Blocplan Algorithm
DOI:
https://doi.org/10.22441/ijiem.v6i3.31934Kata Kunci:
HIRARC, Activity relationship chart, Facility layout, BlocplanAbstrak
Occupational health and safety is something that cannot be separated in human resources where occupational health and safety includes preventing accidents due to work, securing materials, carrying out maintenance to improve living standards and increase productivity. At the Mr. Budi tofu factory, employees have not used Personal Protective Equipment in the production process and the unstructured layout causes work accidents on the production floor. This study aims to conduct an OHS assessment at the Pak Budi tofu factory and redesign the facility layout to reduce work accidents so that the production process is more effective and efficient. The methods used in this research are HIRARC and Blocplan Algorithm. The results of the OHS assessment at the Pak Budi tofu factory show 2 activities with a medium risk level and one activity with a low risk level, in the redesign of the facility layout the distance of material movement in the initial layout is 19.2 m and the distance of material movement in the proposed layout is 11.7 meters where there is a difference in the distance of material movement of 7.5 meters, this shows that the proposed layout can be applied to the Pak Budi tofu factory.Unduhan
Referensi
Adiyanto, O., & Clistia, A. F. (2020). Perancangan Ulang Tata Letak Fasilitas Produksi Ukm Eko Bubut Dengan Metode Computerized Relationship Layout Planning (Corelap). JISI: Jurnal Integrasi Sistem Industri, 7(1), 49. https://doi.org/10.24853/jisi.7.1.49-56
Ahnaf, M., Hibatullah, F., Priyana, E. D., Rizqi, A. W., Teknik, F., Studi, P., Industri, T., & Gresik, U. M. (2024). Analisis potensi bahaya menerapkan metode JSA dan HIRARC pada departemen civil dan electrical PT. ABC. Journal of Information Technology and Computer Science (INTECOMS), 7(3), 948-956. https://doi.org/10.31539/intecoms.v7i3.10570
Anthony, M. B. (2020). Pengaruh Budaya 5R dan Kinerja Karyawan terhadap Lingkungan Kerja di Sinter Plant PT.XYZ. Jurnal Media Teknik Dan Sistem Industri, 4(2), 71. https://doi.org/10.35194/jmtsi.v4i2.1031
Arbi, A. I., & Rendra, H. (2022). Perancangan Tata Letak Fasilitas Lantai Produksi Pada Pembuatan Sepatu Dengan Menggunakan Metode Systematic Layout Planning CV. Sinar Persada Karyatama. IKRAITH-Teknologi, 6(3), 38–52. https://doi.org/10.37817/ikraith-teknologi.v6i3.2305
Aristriyana, E., & Ibnu Faisal Salim, M. (2023). Perancangan Ulang Tata Letak Fasilitas Menggunakan Metode Arc Guna Memaksimalkan Produktivitas Kerja Pada Ukm Sb Jaya Di Cisaga. Jurnal Industrial Galuh, 5(1), 29–36. https://doi.org/10.25157/jig.v5i1.3060
Astuti, F., Wahyudin, W., & Azizah, F. N. (2022). Perancangan Ulang Tata Letak Area Kerja Untuk Meminimasi Waktu dan Jarak Aliran Proses Produksi. Performa: Media Ilmiah Teknik Industri, 21(1), 20. https://doi.org/10.20961/performa.21.1.52313
Azima, F., Arifin, Z., & Afma, V. M. (2020). Perancangan Ulang Tata Letak Pabrik Menggunakan Metode Systematic Layout Planning Guna Meningkatkan Output Produksi Pada Pt. Wahana Tirta Milenia Batam. PROFISIENSI: Jurnal Program Studi Teknik Industri, 8(1), 23–35. https://doi.org/10.33373/profis.v8i1.2563
Azura, R., Nazaruddin, N., Suherman, S., Hadiyul Umam, M. I., & Nur, M. (2024). Analisis Kualitas Produk Tahu Dalam Upaya Meminimalkan Produk Cacat Menggunakan Metode Six Sigma Dan Fuzzy FMEA Pada Pabrik Tahu Pak Budi. Jurnal Perangkat Lunak, 6(1), 66–80. https://doi.org/10.32520/jupel.v6i1.2963
Bastuti, S. (2021). Analisis Tingkat Risiko Bahaya K3 pada Pengelolaan Apartemen Menggunakan Metode Hazard Operability Study (HAZOPS). Jurnal INTECH Teknik Industri Universitas Serang Raya, 7(1), 7–14. https://doi.org/10.30656/intech.v7i1.2664
Bintang Ardiyansyah, Ardhy Lazuardy, & Arief Nurdini. (2024). Pengunaan Metode Hirarc Dalam Menganalisis Risiko K3 Pada Bagian Pengemasan. Jurnal Teknik Dan Science, 3(2), 94–106. https://doi.org/10.56127/jts.v3i2.1549
Fadhilah, U. (2020). Penilaian Risiko Keselamatan dan Kesehatan Kerja pada Pembuatan Gamelan di UD. Supoyo Menggunakan Metode HIRARC. Skripsi: Universitas Negeri Semarang.
Faridah, R., Fatoni, R., & Wicaksono, I. (2020). Analisis Aspek K3 serta Perancangan Ulang Tata Letak Industri Tahu di Kabupaten Sragen. Proceeding of The URECOL, 106–116.
Gerhan, A., & Gazalba, Z. (2020). Perencanaan Keselamatan Dan Kesehatan Kerja (K3) Pada Proyek Konstruksi Dengan Tingkat Resiko Tinggi (Studi Pada Proyek Royal Avilla Malimbu). Spektrum Sipil, 6(1), 45–55. https://doi.org/10.29303/spektrum.v6i1.156
Halim, G., Gozali, L., Kristina, H. J., & Robin, C. (2024). Perancangan Tata Letak Relokasi Lantai Produksi Dengan Metode Systematic Layout Planning, Blocplan, Dan Flap. Jurnal Ilmiah Teknik Industri, 12(1), 57–68. https://doi.org/10.24912/jitiuntar.v12i1.29641
Hidayanti, H. (2023). Kajian Penerapan K3 dan APD Pada Bengkel Diesel Bosch Pump Skala Rumah Tangga. Cakrawala, 17(1), 63–75. https://doi.org/10.32781/cakrawala.v17i1.498
Khotimah, I. anggraeni K., & Allo, A. L. (2022). Analisis Risiko K3 pada Area Produksi Shuttlecock menggunakan Metode HIRARC di UKM Prospek Badminton Shuttlecock. Journal of Industrial View, 4(1), 9–18. https://doi.org/10.26905/jiv.v4i1.7659
Kurniawan, O. O., Yuamita, F., & Yuamita, F. (2024). Analisis K3 Di Pabrik Soun Acdc Kroya Menggunakan Metode Hira Dan Pengendalian Aktivitas Tinggi. Jurnal Ilmiah Research and Development Student, 2(2), 180–193. https://doi.org/10.59024/jis.v2i2.775
Markus, M., Jafriati, & Tungga Dewi, S. (2023). Analisis HIRARC pada Proses Bongkar Muat Petikemas di PT. Pelabuhan Indonesia (Persero) Regional 4 Cabang Kendari Tahun 2022. Jurnal Kesehatan dan Keselamatan Kerja Universitas Halu Oleo, 4(1), 10–19. http://dx.doi.org/10.37887/jk3-uho
Muharni, Y. (2022). Perancangan Tata Letak Fasilitas Gudang Hot Strip Mill Menggunakan Metode Activity Relationship Chart dan Blocplan. Jurnal Teknik Industri: Jurnal Hasil Penelitian Dan Karya Ilmiah Dalam Bidang Teknik Industri, 8(1), 44. https://doi.org/10.24014/jti.v7i2.11526
Naim, M. A., Rimawan, E., . M., & Putri, A. (2020). Relayout Production Facility of PC. Spun Pile Using Systematic Layout Planning in ABC Factory. International Journal of Innovative Science and Research Technology, 5(8), 1620–1629. https://doi.org/10.38124/ijisrt20aug614
Noer, M. F., Perdana, S., & Rahman, A. (2024). Perancangan Ulang Tata Letak Fasilitas Produksi Stainless Steel Menggunakan Metode SLP dan CRAFT. STRING (Satuan Tulisan Riset dan Inovasi Teknologi), 9(1), 124. https://doi.org/10.30998/string.v9i1.24477
Nur Shafirah Ramdhani, A. A., Inca Liperda, R., & Ruswandi, N. (2023). Analisis Risiko K3 Pada Jasa Kepelabuhan Dengan Metode HIRARC (Hazard Identification Risk Assesment and Risk Control) Studi Kasus: PT Pelabuhan Indonesia (Persero) Regional 4 Makassar. INFOTECH Journal, 9(1), 104–114. https://doi.org/10.31949/infotech.v9i1.5064
Nurwahidah, A., Basri, M., Mulyadi, dan, Industri Agro, T., & ATI Makassar, P. (2022). Perancangan Ulang Tata Letak Pabrik dan Identifikasi Risiko K3 pada IKM Mie ABC, Makassar. Prosiding Seminar Nasional Teknologi Industri IX, 2022, 119–125.
Panjaitan, F. Y., & Azizah, F. N. (2020). Perancangan Tata Letak Fasilitas Gudang Produk Jadi menggunakan Metode Activity Relationship Diagram Pada PT. JVC Electronics Indonesia. Jurnal Ilmiah Wahana Pendidikan, 8(9), 30–38. https://doi.org/10.5281/zenodo.6629938
Purnomo, V. P., Teppo, A. N., Husin, S., & Lahay, I. H. (2024). Perancangan Ulang Tata Letak Fasilitas dengan Metode Systematic Layout Planning Pada UMKM Olahan Tuna Fresh. Jurnal Teknik Industri, 27(1), 64–75. http://univ45sby.ac.id/ejournal/index.php/industri/index
Putra, Y. (2022). Perancangan Tata Letak Fasilitas Pada Bengkel Bubut Dan Las Di Cv. Raihan Teknik. Jurnal Industri & Teknologi Samawa, 3(1), 1–10. https://doi.org/10.36761/jitsa.v3i1.1559
Putri Y. D, & Maimunah S. (2023). Relayout Tata Letak Fasilitas Produksi Pada Pt. Blang Ketumba Menggunakan Metode Systematic Layout Planning dan Software Blocplan. Jurnal Manajemen Rekayasa Dan Inovasi Bisnis, 2(2), 1–12.
Saffanah, S., Imral, R. A., & Sibarani, A. A. (2023). Dengan Metode Slp Dan Blocplan Pada Produk Cutting. Jurnal Rekayasa Sistem Industri, 8(2), 17–27.
Sahara, J. A., & Fatoni, R. (2021). Analisis Keselamatan dan Kesehatan Kerja (K3) serta Perancangan Tata Letak Pabrik Tahu dengan Metode 5S di Kabupaten Boyolali. Proceeding of The URECOL, 75–82.
Saputra, M. A., Rachmawaty, D., & Karima, H. Q. (2022). Perancangan Tata Letak Fasilitas Pada UMKM Sepatu “Prohana” menggunakan Systematic Layout Planning. MATRIK Jurnal Manajemen dan Teknik Industri-Produksi, 23(1), 85-98. https://doi.org/10.350587/Matrik
Septianto, A., & Wardhani, A. R. (2020). Penerapan Analisis Resiko Terhadap Kesehatan Dan Keselamatan Kerja (K3) Pada PT. X. Jurnal Aplikasi Dan Inovasi Ipteks Soliditas, 3(1), 6-11.
Shadiq, J., Sukwika, T., Basriman, I., Manajemen, M., Penerapan, A., & Kesehatan Kerja, K. (2023). Strategi Penerapan Keselamatan Kesehatan Kerja Pada Cabang Perusahaan Pergudangan: Menggunakan Metode Analisis SWOT dan AHP. Jambura Journal of Health Science and Research, 5(3), 899- 909. https://doi.org/10.35971/jjhsr.v5i3.20176
Sholekhah, L. N., Rahardian, A. R., Sari, D. A. P., Huda, D. Q., Qoiron, R., & Yuliawati, E. (2022). Perancangan Tata Letak Fasilitas Menggunakan Metode Blocplan “Studi Kasus Toko Oleh-Oleh Surabaya Honest.” Jurnal Ilmiah Teknik Dan Manajemen Industri, 2(2), 249–262. https://doi.org/10.46306/tgc.v2i2.43
Surya, N. L., & Ririh, K. R. (2021). Analisis Risiko Kecelakaan Kerja Menggunakan Metode HIRARC dan Diagram Fishbone pada Lantai Produksi PT DRA Component Persada. Jurnal Teknik Sistem dan Industri, 02(02), 135–152.
https://doi.org/10.35261/gijtsi.v2i2.5658
Wisnu Alfian Majid, & Andung Jati Nugroho. (2023). Analisis Tata Letak Alat Produksi Buku Tahunan Menggunakan Systematic Layout Planning (SLP) dan Blocplan (Studi Kasus: CV Renjana Offset). Jurnal Ilmiah Teknik Industri Dan Inovasi, 1(3), 32–39. https://doi.org/10.59024/jisi.v1i3.319
Unduhan
Diterbitkan
Cara Mengutip
Terbitan
Bagian
Lisensi
The copyright to this article is transferred to Universitas Mercu Buana (UMB) if and when the article is accepted for publication. The undersigned hereby transfers any and all rights in and to the paper including without limitation all copyrights to UMB. The undersigned hereby represents and warrants that the paper is original and that he/she is the author of the paper, except for material that is clearly identified as to its original source, with permission notices from the copyright owners where required. The undersigned represents that he/she has the power and authority to make and execute this assignment.
We declare that:
1. This paper has not been published in the same form elsewhere.
2. It will not be submitted anywhere else for publication prior to acceptance/rejection by this Journal.
3. A copyright permission is obtained for materials published elsewhere and which require this permission for reproduction.
Furthermore, I/We hereby transfer the unlimited rights of publication of the above mentioned paper in whole to UMB. The copyright transfer covers the exclusive right to reproduce and distribute the article, including reprints, translations, photographic reproductions, microform, electronic form (offline, online) or any other reproductions of similar nature.
The corresponding author signs for and accepts responsibility for releasing this material on behalf of any and all co-authors. This agreement is to be signed by at least one of the authors who have obtained the assent of the co-author(s) where applicable. After submission of this agreement signed by the corresponding author, changes of authorship or in the order of the authors listed will not be accepted.
Retained Rights/Terms and Conditions
1. Authors retain all proprietary rights in any process, procedure, or article of manufacture described in the Work.
2. Authors may reproduce or authorize others to reproduce the Work or derivative works for the authors personal use or for company use, provided that the source and the UMB copyright notice are indicated, the copies are not used in any way that implies UMB endorsement of a product or service of any employer, and the copies themselves are not offered for sale.
3. Although authors are permitted to re-use all or portions of the Work in other works, this does not include granting third-party requests for reprinting, republishing, or other types of re-use.
