Proposed Maintenance Planning for Screw Press Machines Using the Reliability Centered Maintenance (RCM) Method at PT. SIR
DOI:
https://doi.org/10.22441/ijiem.v7i1.32415Keywords:
Srew press, Maintenance, Downtime, FMEA, RCMAbstract
PT. SIR is one of the manufacturing companies engaged in processing oil palm fruit into crude palm oil (CPO) and Palm Kernel (PK) with a processing capacity of 45 tons/ hour. From the results of interviews and observations, it was found that the problem that occurred in the company was frequent sudden damage to the srew press machine which resulted in the machine and the production process stopping. The method used in this research is Reliability Centered Maintenance (RCM). The purpose of this research is to identify critical components on the srew press machine, develop a proposed maintenance schedule for each critical component at the Screw Press station, and provide recommendations on the type of periodic maintenance activities for critical components at the Screw Press station. From the results of the research obtained 5 critical components of the srew press machine which are recommended improvements from namely, bearings, shaft press, worm srew, press cage, and spur gear obtained Proposed maintenance schedule for each critical component, namely, on the bearing component the average damage time is 403 hours and the proposed maintenance schedule is 320 hours. Shaft press components average damage time 649.29 and proposed maintenance schedule 470 hours. Worm Srew components average damage 365.58 hours and proposed maintenance schedule 285 hours. Press Cage components average damage 737.5 hours and proposed maintenance schedule 570 hours. Spur Gear components average damage time 671.2 hours and proposed maintenance schedule 520 hours.Downloads
References
Azid, N. A. A., Shamsudin, S. N. A., Yusoff, M. S., & Samat, H. A. (2019, June). Conceptual analysis and survey of total productive maintenance (TPM) and reliability centered maintenance (RCM) relationship. IOP Conference Series: Materials Science and Engineering (Vol. 530(1), 012050. IOP Publishing. https://doi.org/10.1088/1757899X/530/1/012050
Cahyani, O. D., & Iftadi, I. (2021). Scheduling Preventive Maintenance with the Reliability Centered Maintenance Method at the Cabinet PU Station at PT IJK. Teknoin, 27(1), 25-34. https://doi.org/10.20885/teknoin.vol27.iss1.art4
Dahlia, A., Tongsuku, L., & Gunawan, S. (2024). Quality Control Analysis to Minimize the Risk of Defective Products Using Statistical Process Control (SPC) and Failure Modes and Effect Analysis (FMEA) Methods (Case Study: PT XYZ Samarinda). IJIEM-Indonesian Journal of Industrial Engineering & Management, 5(2), 620-63. http://dx.doi.org/10.22441/ijiem.v5i2.24039
Firsya, E., Alisyahbana, T., & Safutra, N. I. (2024). Mitigation Analysis of Cement Production Machine Damage at Pt Semen Bosowa Maros with Fuzzy Failure Mode Effects Analysis (Fmea) and Logic Tree Analysis (LTA) Methods. Scientica: Scientific Journal of Science and Technology, 2(12), 932-937.
Leke, R. M. S., & Saifuddin, J. A.(2024) Proposed Total Productive Maintenance (TPM) Implementation to Increase Heading Machine Effectiveness Using Overall Equipment Effectiveness (OEE) Method on PT. XYZ. IJIEM-Indonesian Journal of Industrial Engineering & Management, 5(2) 359-369. http://dx.doi.org/10.22441/ijiem.v5i2.23832
Maruddani, D. A, Tarno, Hoyyi, A., Rahmawati, R., & Wilandari, Y. (2021). Survival Analysis. Semarang: UNDIP Press Semarang.
Martins, L., Silva, F. J., Pimentel, C., Casais, R. B., & Campilho, R. D. S. G. (2020). Improving preventive maintenance management in an energy solutions company. Procedia Manufacturing, 51, 1551-1558. https://doi.org/10.1016/j.promfg.2020.10.216
Nurjannah, D. A., Kusminah, I. L., Rachmat, A. N., & Nabella, N. (2023). Analysis of Critical Component Determination of Small Excavator Using FMEA Method and Pareto Diagram. Journal of Safety, Health, and Environmental Engineering, 1(1), 7-15. https://doi.org/10.35991/jshee.v1i1.19
Omozuhiomwen, G. E., Kure, H. I., Obi, E. R., Ebenuwa, S. H., Ijemaru, G. K., & Nwajana, A. O. (2025). Reliability–centered maintenance using reliability parameters on gas compressors. International Journal of Manufacturing, Materials, and Mechanical Engineering (IJMMME), 14(1), 1-31. https://doi.org/10.4018/IJMMME.367256
Pasaribu, M. I., Ritonga, D. A. A., & Irwan, A. (2021). Maintenance Analysis of Screw Press Machine at Palm Oil Mill with Failure Mode And Effect Analysis (FMEA) Method at PT XYZ. JiTEKH, 9(2), 104-110. https://doi.org/10.35447/jitekh.v9i2.432
Purba, A., Bukhari, B., & Savitri, A. N. (2023). Half-circle Worm Screw Leaf Cutting to Reduce Broken Nut at PT X Press Station. Engineering Vocational Journal, 1(01), 17-23.
Raharja, I. P., & Suardika, I. B. (2021). Analysis of Lathe Machine Maintenance System Using RCM (Reliability Centered Maintenance) Method at CV. Jaya Perkasa Teknik. Innovative Industry: Journal of Industrial Engineering, 11(1), 39-48. https://doi.org/10.36040/industri.v11i1.3414
Simanungkalit, R. M., Suliawati, S., & Hernawati, T. (2023). Analysis of Maintenance System Implementation Using Reliability Centered Maintenance (RCM) Method on Cement Mill Type Tube Mill at PT Cemindo Gemilang Medan. Blend Science Engineering Journal, 2(1), 72-83. https://doi.org/10.56211/blendsains.v2i1.199
Sinaga, Z., Solihin, S., & Ardan, M. (2021). Maintenance Planning for Welding Mig Machines in Sub Frame Production at PT XYZ with Reliability Centered Maintenance (RCM) Method. Journal of Mechanical Engineering Studies, 6(1), 26-38. https://doi.org/10.52447/jktm.v6i1.4328
Suwandy, R. (2019). Analysis of Digester Machine Maintenance with Reliability Centered Maintenance (RCM) Method at PTPN II Pagar Merbau. University of Medan Area. Medan. https://doi.org/10.31289/jime.v3i2.2948
Syaripudin, M., Budiharjo, B., & Rostikawati, D. A. (2022). Proposed Maintenance of Bending Machine 90 with Preventive Maintenance Approach Based on Reliability Method and FMEA at PT. Rinnai Indonesia-Cikupa. Scientific Journal of Industrial Engineering and Management, 2(2), 175-184. https://doi.org/10.46306/tgc.v2i2.36
Sajaradj, Z., Huda, L, N., & Sinulingga, S. (2019). The Application of Reliability Centered Maintenance (RCM) Methods to Design Maintenance System in Manufacturing (Journal Review). 1st International Conference on Industrial and Manufacturing Engineering, 505. https://doi.org/10.1088/1757-899X/505/1/012058
Tamba, I. A., Margana, A. S., & Prasetyo, B. Y. (2023, August). Maintenance Management Analysis Using Weibull Distribution Calculation and Fmea Method on Ac Package in PT KCI Juanda Carriages. Proceedings of Industrial Research Workshop and National Seminar, 14(1), 235-241). https://doi.org/10.35313/irwns.v14i1.5392
Wibo Wo, T. J., Hidayatullah, T. S., & Nalhadi, A. (2021). Maintenance Analysis on Lathe Machine with Reliability Centered Maintenance (RCM) Approach. Journal of Industrial Engineering (JRI), 3(2), 110-120. https://doi.org/10.37631/jri.v3i2.485
Wicaksono, P. A., Saptadi, S., Nurkertamanda, D., & Rozaq, R. (2021, March). Production Machine Maintenance System Design Using Reliability Centered Maintenance. IOP Conference Series: Materials Science and Engineering, 1096(1), 012018).
Downloads
Additional Files
Published
How to Cite
Issue
Section
License
The copyright to this article is transferred to Universitas Mercu Buana (UMB) if and when the article is accepted for publication. The undersigned hereby transfers any and all rights in and to the paper including without limitation all copyrights to UMB. The undersigned hereby represents and warrants that the paper is original and that he/she is the author of the paper, except for material that is clearly identified as to its original source, with permission notices from the copyright owners where required. The undersigned represents that he/she has the power and authority to make and execute this assignment.
We declare that:
1. This paper has not been published in the same form elsewhere.
2. It will not be submitted anywhere else for publication prior to acceptance/rejection by this Journal.
3. A copyright permission is obtained for materials published elsewhere and which require this permission for reproduction.
Furthermore, I/We hereby transfer the unlimited rights of publication of the above mentioned paper in whole to UMB. The copyright transfer covers the exclusive right to reproduce and distribute the article, including reprints, translations, photographic reproductions, microform, electronic form (offline, online) or any other reproductions of similar nature.
The corresponding author signs for and accepts responsibility for releasing this material on behalf of any and all co-authors. This agreement is to be signed by at least one of the authors who have obtained the assent of the co-author(s) where applicable. After submission of this agreement signed by the corresponding author, changes of authorship or in the order of the authors listed will not be accepted.
Retained Rights/Terms and Conditions
1. Authors retain all proprietary rights in any process, procedure, or article of manufacture described in the Work.
2. Authors may reproduce or authorize others to reproduce the Work or derivative works for the authors personal use or for company use, provided that the source and the UMB copyright notice are indicated, the copies are not used in any way that implies UMB endorsement of a product or service of any employer, and the copies themselves are not offered for sale.
3. Although authors are permitted to re-use all or portions of the Work in other works, this does not include granting third-party requests for reprinting, republishing, or other types of re-use.
