Analysis of the Application of the Six Sigma Method in Quality Control of Floating Equipment Products (Case Study: Manufacturing Industry)
DOI:
https://doi.org/10.22441/ijiem.v6i3.30670Kata Kunci:
Quality Control, Floating equipment, Six Sigma, KaizenAbstrak
The company engaged in manufacturing with a focus on producing oilfield equipment used for drilling exploration wells, especially the cementing process. One of the tools produced is floating equipment. To identify and maintain the quality of floating equipment products, the Six Sigma and Kaizen 5W1H methods are used. At the define stage, it is determined that the problems that occurred during the 2023 period with a total production of 923 units and 90 units of defects, there are 5 types of defects in the form of, non-conforming cement test results, unmatch components, damaged materials, non-conforming sizes, and non-conforming thread profiles, based on CTQ and Pareto diagrams, the main priority for improvement is the type of defects in non-conforming cement test results, unmatch components, and damaged materials. At the measure stage, the DPMO (defect per million opportunity) calculation is 19,501.625 with a sigma level of 3.5642, this value shows that improvements are still needed in the production process of floating equipment products. The proposed improvements focus on training production operators and overcoming human error, maintenance and inspection of machines and other tooling, increasing inspection and supervision and paying attention to the storage and treatment of the materials used.Unduhan
Referensi
Agrina, C. R. (2023). Penerapan Metode Six
Sigma Pada Pabrik Teh Ciater PTPN VIII Bandung. Bussman Journal: Indonesian Journal of Business and Management, 3(2), 882–904.
https://doi.org/10.53363/buss.v3i2.176
Agustiandi, D., Madelan, S., & Saluy, A. B.
(2021). Quality Control Analysis using Six Sigma (DMAIC) Method to Reduce Post Pin Isolator Reject in PT XYZ in Firing Section. International Journal of Innovative Research in Engineering & Multidisciplinary Physical Sciences, 9(1), 17–29. https://doi.org/10.37082/ijirmps.2021.v09i01.003
Ahmad, F. (2019). Six Sigma Dmaic Sebagai
Metode Pengendalian Kualitas Produk Kursi Pada Ukm. Jisi Um, 6(1), 7. https://jurnal.umj.ac.id/index.php/jisi/article/view/4061
Alfadilah, H., Hadining, A. F., & Hamdani, H.
(2022). Pengendalian Kualitas Produk Cacat Piece Pivot pada PT. Trijaya Teknik Karawang Menggunakan Seven tool dan Analisis Kaizen. Jurnal Serambi Engineering, 7(1), 2814–2822. https://doi.org/10.32672/jse.v7i1.3667
Amirullah, & Dewi Masruroh, P. (2020).
Implementasi Konsep Kaizen Dalam Meningkatkan Kinerja Karyawan. Akademika, 18(1), 66–76.
Dwi, D. M., Pradiani, T., & Rachmawati, I. K.
(2021). PENGARUH KUALITAS PRODUK, HARGA, DISKON, DAN KEPUTUSAN PEMBELIAN ONLINE MAHARANI PRIMA SKIN CARE DI BLITAR. Jurnal Ekonomi Manajemen Dan Bisnis, 2(1), 8–19. https://doi.org/10.32815/jubis.v2i2.442
Faritsy, A. Z. Al, & Syaifuddin, I. (2023).
Pengendalian Kualitas Produk Plastik Jenis Polypropylene Menggunakan Metode Seven Tools Pada PT.Kusuma Mulia Plasindo Infitex. Jurnal Ilmiah Teknik Mesin, Elektro Dan Komputer, 3(1), 49–63. https://doi.org/10.51903/juritek.v3i1.1130
Gaspersz, V. (2002). Pedoman Implementasi
Program Six Sigma Terintergrasi dengan ISO:9001: 2000, MBNQA, dan HACCP. PT Gramedia Pustaka Utama.
Gaspersz, V. (2007). Lean six sigma for
manufacturing and service industries : strategi dramatik reduksi cacat /kesalahan, biaya, inventori, dan lead time dalam waktu kurang dari 6 bulan (Vol. 10, Issue 1). PT Gramedia Pustaka Utama.
Gaspersz, V. (2010). Total Quality
Management. PT Gramedia Pustaka Utama.
Indrawansyah, I., & Cahyana, B. J. (2019).
Analisa Kualitas Proses Produksi Cacat Uji Bocor Wafer dengan menggunakan Metode Six Sigma serta Kaizen sebagai Upaya. Prosiding Seminar Nasional Sains Dan Teknologi, 1–8.
Kumrotin, E. L., & Susanti, A. (2021).
Pengaruh Kualitas Produk, Harga, Dan Kualitas Pelayanan Terhadap Kepuasan Konsumen Pada Cafe Ko.We.Cok Di Solo. J-MIND (Jurnal Manajemen Indonesia), 6(1), 1. https://doi.org/10.29103/j-mind.v6i1.4870
Muttaqin, N. U. Al, & Aryanny, E. (2024).
Defect Analysis of Packaging Bottle Products Using Six Sigma and Kaizen Methods at PT. XYZ. IJIEM - Indonesian Journal of Industrial Engineering and Management, 5(1), 265. https://doi.org/10.22441/ijiem.v5i1.22420
Novia, M. A., Semmaila, B., & Imaduddin, I.
(2024). Pengaruh kualitas Layanan Dan Kualitas Produk Terhadap Kepuasan Pelanggan. Tata Kelola, 11(2), 111–122. https://doi.org/10.52103/jtk.v11i2.174
Okstevia, A. S., & Sumiati. (2024). Analysis of
Patient Bed Product Quality Control with Six Sigma Method and Failure Mode and Effects Analysis (FMEA) (Case Study of PT . Karya Indah Medika). IJIEM (Indonesian Journal of Industrial Engineering & Management), 5(1), 121–136. https://doi.org/10.22441/ijiem.v5i1.21770
Oktavia, A., & Herwanto, D. (2021). Analisis
Pengendalian Kualitas Produk Menggunakan Pendekatan Statistical Quality Control (SQC) di PT. Samcon. Industri Inovatif : Jurnal Teknik Industri, 11(2), 106–113. https://doi.org/10.36040/industri.v11i2.3666
Paisal, A., & Cahyana, J. (2020). Analisis
Penyebab Cacat Menggunakan Metode Failure Mode Effect and Analysis (FMEA) Pada Produk Dark Compound Dengan Pendekatan Metode Kaizen Untuk Memperbaiki Sistem Produksi Studi Kasus PT. XYZ. SNIT-Politeknik Negeri Balikpapan, 4, 328–336.
Pande, P. S., Neuman, R. P., & Cavanagh, R. R.
(2002). The six sigma way, Bagaimana GE, Motorola, dan Perusahaan Terkenal Lainnya Mengasah Kinerja Mereka. Penerbit Andi Yogyakarta. https://link.springer.com/chapter/10.1007/978-3-8349-9320-5_24%0Ahttp://dspace.vnbrims.org:13000/jspui/bitstream/123456789/4759/1/The six sigma way.pdf
Priambodo, A., Julianto, C., Nugroho, M. R., &
Tulloh, H. (2020). Studi Perencanaan dan Pelaksanaan Squeeze Cementing Metode Bradenhead Squeeze untuk Water Shut Off pada Sumur Minyak dengan Water Cut Tinggi. Prosiding Seminar Nasional Sains Dan Teknologi Terapan, 1(1), 403–410. https://www.researchgate.net/publication/347507705
Tajuddin, T., & Junaedi, A. (2021). Usulan
Pengendalian Kualitas Pelayanan Pada Pt. Pegunungan Cartenz Papua Menggunakan Metode Statistical Processing Control. Metode : Jurnal Teknik Industri, 7(1), 1–17. https://doi.org/10.33506/mt.v7i1.1646
Terang, A. E., Anggraini, N., & Noermaning, P.
(2023). Analisis Perlakuan Akuntansi Produk Rusak Dan Produk Cacat Dalam Perhitungan Harga Pokok Produksi Untuk Mengoptimalkan Laba Produk (Studi Kasus Pada CV. Memory Nganjuk). JCA (Jurnal Cendekia Akuntansi), 4(1), 25. https://doi.org/10.32503/akuntansi.v4i1.3548
Walujo, D. A., Koesdijati, T., & Utomo, Y.
(2020). Pengendalian kualitas. Scopindo Media Pustaka.
Yuliarty, P., Soedidyo, A., & Afrizal, R. (2024).
Kaizen Implementation in the Motorcycle Tire Testing Stage with the PDCA Cycle. IJIEM (Indonesian Journal of Industrial Engineering & Management), 5(1), 51–57. https://doi.org/10.22441/ijiem.v5i1.22296
Yusuf, M., & Supriyadi, E. (2020). MINIMASI
PENURUNAN DEFECT PADA PRODUK MEBLE BERBASIS PROLYPROPYLENE UNTUK MENINGKATKAN KUALITAS Study Kasus : PT. Polymindo Permata. Jurnal Ekobisman, 4(3), 244–255.
Unduhan
Diterbitkan
Cara Mengutip
Terbitan
Bagian
Lisensi
The copyright to this article is transferred to Universitas Mercu Buana (UMB) if and when the article is accepted for publication. The undersigned hereby transfers any and all rights in and to the paper including without limitation all copyrights to UMB. The undersigned hereby represents and warrants that the paper is original and that he/she is the author of the paper, except for material that is clearly identified as to its original source, with permission notices from the copyright owners where required. The undersigned represents that he/she has the power and authority to make and execute this assignment.
We declare that:
1. This paper has not been published in the same form elsewhere.
2. It will not be submitted anywhere else for publication prior to acceptance/rejection by this Journal.
3. A copyright permission is obtained for materials published elsewhere and which require this permission for reproduction.
Furthermore, I/We hereby transfer the unlimited rights of publication of the above mentioned paper in whole to UMB. The copyright transfer covers the exclusive right to reproduce and distribute the article, including reprints, translations, photographic reproductions, microform, electronic form (offline, online) or any other reproductions of similar nature.
The corresponding author signs for and accepts responsibility for releasing this material on behalf of any and all co-authors. This agreement is to be signed by at least one of the authors who have obtained the assent of the co-author(s) where applicable. After submission of this agreement signed by the corresponding author, changes of authorship or in the order of the authors listed will not be accepted.
Retained Rights/Terms and Conditions
1. Authors retain all proprietary rights in any process, procedure, or article of manufacture described in the Work.
2. Authors may reproduce or authorize others to reproduce the Work or derivative works for the authors personal use or for company use, provided that the source and the UMB copyright notice are indicated, the copies are not used in any way that implies UMB endorsement of a product or service of any employer, and the copies themselves are not offered for sale.
3. Although authors are permitted to re-use all or portions of the Work in other works, this does not include granting third-party requests for reprinting, republishing, or other types of re-use.
