DESIGN OF FRAME FOR THE PUMP PERFORMANCE TEST EQUIPMENT USING VDI 2221 METHOD

Penulis

  • Muhamad Fitri Universitas Mercu Buana
  • Frelly Rizqiansyah Universitas Mercu Buana

DOI:

https://doi.org/10.22441/ijimeam.v4i1.15374

Kata Kunci:

PPTE, Frame, VDDI 2221

Abstrak

Pumps in modern human life have become a major need, and their use is very wide, therefore pump learning is indispensable for mechanical engineering students. For pump performance learning media, Pump Performance Test Equipment (PPTE) is needed. The test equipment requires a strong frame and meets the requirements to be able to withstand the load, not only the equipment load but also the water weight used as the working fluid on the performance test equipment which is very large. This study aims to design a frame that can withstand the entire load of the PPTE. The design is done by calculating the load experienced by the frame when the test equipment is operated. The design of this pump performance test framework uses the VDI 2221 method, which includes several stages: task clarification, design concepts, concept embodiment, and design details. The results obtained from the use of the VDI 2221 method are variation 1, with a frame of 1000mm length, 1200mm width, and 1140mm height. The frame specifications using 4x4 hollow steel size with a thickness of 2mm and 4x6 size with a thickness of 3mm, and using a wheel type with a lock that can withstand the load. maximum up to 600kg.

Unduhan

Data unduhan belum tersedia.

Referensi

A. Supendi and M. Fitri, “Pemilihan Spesifikasi Komponen Alat Uji Prestasi Pompa Menggunakan Metode Analisis Persamaan Bernoulli” Jurnal Teknik Mesin, vol. 11, no. 1, p. 42, 2022.

A. Basri and M. Fitri, “Perancangan Alat Uji Prestasi Pompa Menggunakan Metode VDI 2221” Jurnal Teknik Mesin, vol. 10, no. 3, p. 126, 2021.

Z. Pratama, “Desain Komponen Utama Alat Uji Konstanta Pegas Untuk Kapasitas 50 N/Mm,” J. Tek. Mesin, vol. 10, no. 1, p. 15, 2021.

H. Pranoto, M. Fitri, and A. F. Sudarma, “Analisis Statik Pelat Penyambung pada Ladder Frame Chassis Untuk Kendaraan Pedesaan Dengan Menggunakan Metode Elemen Hingga,” Rotasi, vol. 23, no. 1, pp. 18–23, 2021.

A. Pratama and M. Fitri, “Rancang Bangun Alat Uji Konstanta Pegas Untuk Kapasitas 50 N/Mm Menggunakan Metode VDI 2221,” AME (Aplikasi Mek. dan Energi) J. Ilm. Tek. Mesin, vol. 6, no. 2, p. 41, 2020.

A. Digdoyo and D. Djamruddin, “Performa Alat Uji Pompa Sentrifugal Pada Putaran 1200 RPM dan 800 RPM,” pp. 1–7, 2020.

M. Munasir, “Studi Pengaruh Orientasi Serat Fiber Glass Searah dan Dua Arah Single Layer terhadap Kekuatan Tarik Bahan Komposit Polypropylene,” J. Penelit. Fis. dan Apl., vol. 1, no. 1, p. 33, 2011.

R. Harfi and U. M. Sugeng, “Analisa Biaya Dan Perancangan Alat Pemasang Bushing Pada Attachment Pc 400 Dengan Metode VDI,” vol. 2, no. 2, pp. 47–54, 2015.

U. Panjaitan, “Perancangan Mesin Pencacah Rumput Multifungsi Dengan Metode VDI 2221,” Presisi, vol. 22, no. 1, pp. 65–78, 2020.

J. Jänsch and H. Birkhofer, “The development of the guideline VDI 2221 - The change of direction,” 9th Int. Des. Conf. Des. 2006, pp. 45–52, 2006.

Unduhan

File Tambahan

Diterbitkan

2022-08-12

Cara Mengutip

1.
Fitri M, Rizqiansyah F. DESIGN OF FRAME FOR THE PUMP PERFORMANCE TEST EQUIPMENT USING VDI 2221 METHOD. Int. J. Innov. Mech. Eng. Adv. Mater [Internet]. 12 Agustus 2022 [dikutip 29 Mei 2026];4(1):17-22. Tersedia pada: https://training-ojs3-publikasi.mercubuana.ac.id/index.php/ijimeam/article/view/15374

Terbitan

Vol 4 No 1 (2022)

Bagian

Articles

Lisensi

Authors who publish in IJIMEAM retain the following rights:
  • Author retains the copyright and grants the journal the right of first publication of the work simultaneously licensed under the Creative Commons Attribution-ShareAlike 4.0 License that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal.
  • Author is able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book) with the acknowledgment of its initial publication in this journal.
  • Author is permitted and encouraged to post his/her work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of the published work (See What is Open Access).

Read more about the Creative Commons Attribution-ShareAlike 4.0 Licence here: https://creativecommons.org/licenses/by-sa/4.0/.
Crossref
Scopus
Google Scholar
Europe PMC

Artikel paling banyak dibaca berdasarkan penulis yang sama