ANALYTICAL CALCULATION OF PULLEY AND V-BELT FOR RICE THRESHER POWERED BY MATARI MGX-390 GASOLINE ENGINE
DOI:
https://doi.org/10.22441/ijimeam.v4i3.19441Kata Kunci:
Matari MGX-390, Rice Threshing, V-belt, Pulley, Gasoline EngineAbstrak
In the agricultural industry today, a lot of tools with automatic transmission have become primary needs for many people. To be able to operate a rice threshing machine, one that can support the running of the tool is the pulley and V-belt on the driving machine. Therefore, this research aims to analyze the pulley and V-belt on the rice thresher with the Matari MGX-390 gasoline engine so that it meets the required criteria and applicable standards. Due to the important role of the V-belt and pulley components, this study will discuss calculations in the design of V-belt and pulley components for a rice thresher with a Matari MGX-390 gasoline engine. The method used is direct observation, to see directly the shape and specifications of the rice thresher machine as well as the Matari MGX-390 gasoline engine used, also to record the dimensions of the pulley and V-belt so that further analysis is carried out on these components, and it can be seen whether the pulley and the V-belt used can be declared safe. Then calculations are carried out to determine the type of V-belt used, V-belt length, maximum voltage, demand voltage, and service life on the V-belt used. Based on the results of the research and calculations that have been carried out, it shows that the V-belt used by the rice thresher with the Matari MGX-390 machine can be declared safe with the type of V-belt used as type A, with a length of 1,649.74 mm, a maximum tension of 138.8 N, voltage requirement 121 N, service life 14,055 working hours.
Unduhan
Referensi
Badan Pusat Statistik. (2021). Luas panen dan produksi padi di Indonesia 2021 (Angka Sementara). Berita Resmi Statistik.
Kementerian Perdagangan. (2017). Profil komoditas padi. Komoditas tanaman pangan di Indonesia. Kementrian Perdagangan Republik Indonesia.
Kuswoyo, A. (2017). Rancang bangun mesin perontok padi portabel dengan penggerak mesin sepeda motor. Elemen: Jurnal Teknik Mesin, 4(1), 35-38.
Sebayang, S., Pardede, S., Hutasoit, L. E. P., & Laia, W. B. A. (2022). Rancang bangun mesin pengupas kulit kacang tanah dengan penggerak motor bensin. Jurnal Teknologi Mesin UDA, 3(1), 47-89.
Mahmudi, H. (2021). Analisa perhitungan pulley dan V-belt pada sistem transmisi mesin pencacah. Jurnal Mesin Nusantara, 4(1), 40-46.
Nugraha, M. W., Santoso, D. T., & Naubnome, V. (2022). Analisa dan perhitungan belt pada mesin huller kopi. Media Bina Ilmiah, 17(1), 175-184.
Tampubolon, D. H., Anjani, R. D., & Santoso, D. T. (2022). Perancangan timing belt pada Toyota Fortuner 2014. Jurnal Ilmiah Wahana Pendidikan, 8(19), 443-450.
Putra, A. S. (2022). Perhitungan pulley dan v-belt pada perancangan sistem transmisi mesin pencacah eceng gondok untuk alternatif pakan ternak. Gorontalo Journal of Infrastructure and Science Engineering, 5(1), 14-20.
Zakaria. (2019). Evaluasi ketegangan V belt terhadap lifetime V belt pada pumping unit sumur X, Y, Z Lapangan Langgak [Thesis, Universitas Islam Riau]. Repository Universitas Islam Riau.
Budynas, R. G., & Nisbett, J. K. (2011). Shigley's mechanical engineering design. McGraw-Hill.
Choerullah, A. I., Anjani, R. D., & Suci, F. C. (2022). Analisis perhitungan poros, pulley dan V-belt pada sepeda motor Honda Vario 125CC 2018. Jurnal Ilmiah Wahana Pendidikan, 8(8), 1-13.
Aslam, M. N., Munir, M. M., & Indrawan, R. (2018, December). Rancang bangun mesin crusher plastik. In Proceedings Conference on Design Manufacture Engineering and its Application (Vol. 2, No. 1, pp. 101-104).
Unduhan
Diterbitkan
Cara Mengutip
Terbitan
Bagian
Lisensi
Authors who publish in IJIMEAM retain the following rights:- Author retains the copyright and grants the journal the right of first publication of the work simultaneously licensed under the Creative Commons Attribution-ShareAlike 4.0 License that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal.
- Author is able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book) with the acknowledgment of its initial publication in this journal.
- Author is permitted and encouraged to post his/her work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of the published work (See What is Open Access).
Read more about the Creative Commons Attribution-ShareAlike 4.0 Licence here: https://creativecommons.org/licenses/by-sa/4.0/.
