Pengembangan elektroda referensi Cu/CuSO4 padatan berbasiskan membran fotopolimer pHEMA
DOI:
https://doi.org/10.22441/jonem.v1i1.14571Abstract
The reference electrode plays a role in the electrochemical measurement process as a comparison electrode. In this study, 3 variations of Cu/CuSO4 solid-state reference electrode were prepared using poly (Hydroxyethyl) Methacrylate (pHEMA) as a membrane with photopolymer technique. The three electrodes were tested for DmV with a solution of pH 4, pH 7, and pH 10, whereas in Cu/CuSO4 III electrode was the best Cu/CuSO4reference electrode with an mV value of 11,4 mV. The Cu/CuSO4 reference electrode III is further tested, namely cyclic voltammetry testing, pH sensor Vs testing, and drift testing. In this test, the Cu/CuSO4reference electrode III produced the same cyclic voltammogram chart pattern as the Ag/AgCl reference electrode. In the Vs sensor test, the slope value of the Cu/CuSO4reference electrode III was 50,933 mV/decade, and the slope value in the Ag/AgCl reference electrode was 45,55 mV/decade. The results showed that the Cu/CuSO4 reference electrode III showed fairly good stability with a drift value of 0.5 mV/minute from the drift test results.Downloads
References
Maryanto, A., & Kurniawan, F. (2016). Fabrikasi elektroda pembanding Ag/AgCl menggunakan membran Poliisoprena dan LDPE. Jurnal Sains Dan Seni ITS, 5(2), 2–5.
Alva, S., Widinugroho, A., Adrian, M., Khaerudini, D. S., Pratiwi, S. E., & Aziz, A. S. A. (2019). The New Lead (II) Ion Selective Electrode Based On Free Plasticizer Film of pTHFA Photopolymer. Journal of The Electrochemical Society, 166(15), B1513–B1519. https://doi.org/10.1149/2.0601915jes
Alva, S., Suherman, R., Friliandita, V., Khaerudini, D. S., Majlan, E. H., & Aziz, A. S. A. (2020). Preliminary study of poly(Tetrahydrofurfuryl acrylate) thin film as a potential material of ion selective electrodes: The case of nitrate ion-selective electrode. Indonesian Journal of Chemistry, 20(3), 645–654. https://doi.org/10.22146/ijc.44478
Sudarvizhi, A., Pandian, K., Oluwafemi, O. S., & Gopinath, S. C. B. (2018). Amperometry detection of nitrite in food samples using tetrasulfonated copper phthalocyanine modified glassy carbon electrode. Sensors and Actuators, B: Chemical, 272, 151–159. https://doi.org/10.1016/j.snb.2018.05.147
Izadyar, A., Al-Amoody, F., & Arachchige, D. R. (2016). Ion transfer stripping voltammetry to detect nanomolar concentrations of Cr (VI) in drinking water. Journal of Electroanalytical Chemistry, 782, 43–49. https://doi.org/10.1016/j.jelechem.2016.10.002
Maruthapandian, V., Saraswathy, V., & Muralidharan, S. (2016). Development of solid state embeddable reference electrode for corrosion monitoring of steel in reinforced concrete structures. Cement and Concrete Composites, 74, 100–108. https://doi.org/10.1016/j.cemconcomp.2016.09.001
Liang, S., & Zeng, C. C. (2020). Organic electrochemistry: Anodic construction of heterocyclic structures. Current Opinion in Electrochemistry, 24, 31–43. https://doi.org/10.1016/j.coelec.2020.06.005
Huang, P., & Zhang, Y. (2018). Electrodeposition of nickel coating in choline chloride-urea deep eutectic solvent. International Journal of Electrochemical Science, 13(11), 10798–10808. https://doi.org/10.20964/2018.11.65
Wright, R. F., Lu, P., Devkota, J., Lu, F., Ziomek-Moroz, M., & Ohodnicki, P. R. (2019). Corrosion sensors for structural health monitoring of oil and natural gas infrastructure: A review. Sensors (Switzerland), 19(18). https://doi.org/10.3390/s19183964
Alva, S., Ardiyansyah, D., Khaerudini, D. S., & Suherman, R. (2019). Solid-State Reference Electrode Based on Thin-Films of Tetrahydrofurfuryl Acrylate (pTHFA) Photopolymer. Journal of The Electrochemical Society, 166(8), B598–B603. https://doi.org/10.1149/2.1331906jes
Alva, S., Aziz, A., Syono, M. I., & Sebayang, D. (2017). Development of solid-state reference electrode based on sodium polyanethol sulfonate immobilised on cellulose acetate. Journal of Physical Science, 28(2), 161–179. https://doi.org/10.21315/jps2017.28.2.11
Dewi, M. S. (2020). Pengembangan Dan Karakterisasi Elektroda Referensi Cu/Cuso4 Padatan. Laporan Tugas Minor. Universitas Mercu Buana, Jakarta
Hall, D. M., Beck, J. R., Brand, E., Ziomek-Moroz, M., & Lvov, S. N. (2016). Copper-Copper Sulfate Reference Electrode for Operating in High Temperature and High Pressure Aqueous Environments. Electrochimica Acta, 221, 96–106. https://doi.org/10.1016/j.electacta.2016.10.143
Alva, S. (2010). Durable Planar Reference Electrode. International Publication, WIPO Patent WO 2010/021536 A2
Nnamchi, P. S., & Obayi, C. S. (2018). Electrochemical characterization of nanomaterials. In Characterization of Nanomaterials: Advances and Key Technologies. Elsevier Ltd. https://doi.org/10.1016/B978-0-08-101973-3.00004-3
Alva, S., Binti Abdul Aziz, A. S., Bin Syono, M. I., & Bin Wan Jamil, W. A. (2018). Ag/AgCl reference electrode based on thin film of arabic gum membrane. Indonesian Journal of Chemistry, 18(3), 479–485. https://doi.org/10.22146/ijc.28859
Ying, K. S., Heng, L. Y., Hassan, N. I., & Hasbullah, S. A. (2020). A New and All-Solid-State Potentiometric Aluminium Ion Sensor for Water Analysis. Sensors, 20(23), 6898. doi:10.3390/s20236898
Alva, S., Hindasah, E., Jamil,W.A.W., Prasetyorini,T., (2019). Development of Integrated Planar Chloride Ion-Selective Electrode and Ag/AgCl Reference Electrode based on Chitosan/Cellulose Acetate Membrane for Blood Serum Analysis. Bioanal. Electrochem., 11(12), 1669–1686.
Manurung, A. D. an R. V. (2011). Mikrofabrikasi Elektroda untuk Aplikasi Deteksi Konsentrasi [H+] dengan Teknologi Lapisan Tebal. Jurnal Ilmiah Elite Elektro, 2(1), 7–12.
Park, H. J., Yoon, J. H., Lee, K. G., & Choi, B. G. (2019). Potentiometric performance of flexible pH sensor based on polyaniline nanofiber arrays. Nano Convergence, 6(1). https://doi.org/10.1186/s40580-019-0179-0
Downloads
Published
How to Cite
Issue
Section
License
The copyright to this article is transferred to Universitas Mercu Buana (UMB) if and when the article is accepted for publication. The undersigned hereby transfers any and all rights in and to the paper including without limitation all copyrights to UMB. The undersigned hereby represents and warrants that the paper is original and that he/she is the author of the paper, except for material that is clearly identified as to its original source, with permission notices from the copyright owners where required. The undersigned represents that he/she has the power and authority to make and execute this assignment. The Copyright Transfer Agreement (CTA) Form is able to download in CTA Form
We declare that:
1. This paper has not been published in the same form elsewhere.
2. It will not be submitted anywhere else for publication prior to acceptance/rejection by this Journal.
3. Copyright permission is obtained for materials published elsewhere and which require this permission for reproduction.
Furthermore, I/We hereby transfer the unlimited rights of publication of the above-mentioned paper in whole to UMB. The copyright transfer covers the exclusive right to reproduce and distribute the article, including reprints, translations, photographic reproductions, microform, electronic form (offline, online) or any other reproductions of similar nature.
The corresponding author signs for and accepts responsibility for releasing this material on behalf of any and all co-authors. This agreement is to be signed by at least one of the authors who have obtained the assent of the co-author(s) where applicable. After submission of this agreement signed by the corresponding author, changes of authorship or in the order of the authors listed will not be accepted.
Retained Rights/Terms and Conditions
1. Authors retain all proprietary rights in any process, procedure, or article of manufacture described in the Work.
2. Authors may reproduce or authorize others to reproduce the Work or derivative works for the author's personal use or for company use, provided that the source and the UMB copyright notice are indicated, the copies are not used in any way that implies UMB endorsement of a product or service of any employer, and the copies themselves are not offered for sale.
3. Although authors are permitted to re-use all or portions of the Work in other works, this does not include granting third-party requests for reprinting, republishing, or other types of re-use.
