Spindle Speed and Feeding Rate Analysis of AC2B Aluminum Surface Roughness on Special Purpose Machine
DOI:
https://doi.org/10.22441/jonem.v1i3.17541Keywords:
Surface roughness, BTA Tongtai special purpose machine, Spindle speed, Feed rate Alumunium AC2BAbstract
Many industries use conventional machines to create surface roughness during the machining process, but as technology and market demand evolve, many processes are no longer feasible. This is due to the limitations of traditional machines. In this case, the industry employs Special Purpose Machines to carry out processes that conventional machines cannot, such as in the shock breaker manufacturing industry. However, the cutting process parameters, namely spindle speed and feed rate, must be considered during the process. This will have an effect on the value of the surface roughness generated. Surface roughness is very important in the shock breaker. Aside from that, cutting time is an important consideration in manufacturing.
The effect of spindle speed and feed rate on the surface roughness produced by the BTA Tongtai Special Purpose Machine with AC2B aluminum material with a specimen size of 25 x 241 mm will be tested in this study. The experimental method is employed.
The spindle speed and feed rate on the BTA Tongtai special purpose machine can affect the AC2B aluminum roughness results, according to the findings of this study. The results of surface roughness, spindle speed and feed rate on the BTA Tongtai special purpose machine can affect the AC2B aluminum roughness results, according to the findings of this study. The results of surface roughness produced with variations of spindle speeds of 1200, 2450, and 3600 rpm that were tested using a surface tester revealed that spindle speed parameters of 1200 and 3600 rpm were used to produce a small surface roughness.
Downloads
References
Isya Prakoso, “Analisa Pengaruh Kecepatan Feeding Terhadap Kekasaran Permukaan Draw Bar Mesin Milling Aciera Dengan Proses CNC Turning,” 2014. Accessed: Oct. 25, 2022. [Online]. Available: https://publikasi.mercubuana.ac.id/index.php/jonem
Dhanu Widhiantoro, “Pengaruh Spindle Speed dan Feed Rate Terhadap Kekasaran Permukaan AL 6061 Melalui Proses CNC Milling Sinumeric Type 802S,” 2017.
Dika Kurnia Al-Fiansyah, “Pengaruh Kedalaman dan Kecepatan Pemakanan Terhadap Tingkat Kekasaran Permukaan Baja ST 60 Menggunakan Pahat Insert,” 2017.
D. Rahdiyanta, J. Pendidikan, and T. Mesin, “Buku 3 Proses Frais (Milling),” 2010.
A. D. Ramadan, I. G. N. K. Yudhyadi, and T. Rachmanto, “Optimize of machining parameters toward the process time of programming CNC milling based with CAD/CAM.”
L. Sumitomo Electric Industries, Performance Cutting Tools. Koyakita, 2021.
Roni Mustafik, “Pengaruh Kecepatan Pemakanan dan Kecepatan Potong Terhadap Tingkat Kekasaran Permukaan Baja VCN 150 Proses CNC Turning,” 2020.
D. Jenderal Manajemen Pendidikan Dasar dan Menengah, Teknik Permesinan Jilid 1 SMK Direktorat Pembinaan Sekolah Menengah Kejuruan. 2008.
B. Atedi and D. Agustono, “Standar Kekasaran Permukaan Bidang Pada Yoke Flange Menurut ISO R.1302 dan DIN 4768 Dengan Memperhatikan Nilai Ketidakpastiannya,” vol. 6, no. 2, 2005, Accessed: Oct. 24, 2022. [Online]. Available: https://journals.ums.ac.id
Sudji Munadi, Panduan pengajar buku dasar-dasar metrologi industri. Jakarta: Departemen Pendidikan dan Kebudayaan, Direktorat Jenderal Pendidikan Tinggi, Proyek Pengembangan Lembaga Pendidikan Tenaga Kependidikan, 1988.
Budiarto Djono Siswanto and Hernowo Widodo, “Analisis Pengaruh Penambahan Strontium Terhadap Sifat Mekanik dan Strukturmikro Pada Paduan Al90,28Si6,42Cu2,66Fe0,67,” 2019.
Downloads
Published
How to Cite
Issue
Section
License
The copyright to this article is transferred to Universitas Mercu Buana (UMB) if and when the article is accepted for publication. The undersigned hereby transfers any and all rights in and to the paper including without limitation all copyrights to UMB. The undersigned hereby represents and warrants that the paper is original and that he/she is the author of the paper, except for material that is clearly identified as to its original source, with permission notices from the copyright owners where required. The undersigned represents that he/she has the power and authority to make and execute this assignment. The Copyright Transfer Agreement (CTA) Form is able to download in CTA Form
We declare that:
1. This paper has not been published in the same form elsewhere.
2. It will not be submitted anywhere else for publication prior to acceptance/rejection by this Journal.
3. Copyright permission is obtained for materials published elsewhere and which require this permission for reproduction.
Furthermore, I/We hereby transfer the unlimited rights of publication of the above-mentioned paper in whole to UMB. The copyright transfer covers the exclusive right to reproduce and distribute the article, including reprints, translations, photographic reproductions, microform, electronic form (offline, online) or any other reproductions of similar nature.
The corresponding author signs for and accepts responsibility for releasing this material on behalf of any and all co-authors. This agreement is to be signed by at least one of the authors who have obtained the assent of the co-author(s) where applicable. After submission of this agreement signed by the corresponding author, changes of authorship or in the order of the authors listed will not be accepted.
Retained Rights/Terms and Conditions
1. Authors retain all proprietary rights in any process, procedure, or article of manufacture described in the Work.
2. Authors may reproduce or authorize others to reproduce the Work or derivative works for the author's personal use or for company use, provided that the source and the UMB copyright notice are indicated, the copies are not used in any way that implies UMB endorsement of a product or service of any employer, and the copies themselves are not offered for sale.
3. Although authors are permitted to re-use all or portions of the Work in other works, this does not include granting third-party requests for reprinting, republishing, or other types of re-use.
