Analisis Penggunaan Bekisting Konvensional, Baja dan Sistim Peri dari Segi Biaya pada Struktur Pier Konstruksi Ramp On/Off Jalan Tol
DOI:
https://doi.org/10.22441/jrs.2023.v12.i1.05Abstract
Formwork is a concrete mold reference or temporary structural element in the work of construction that also contributes to the cost of project implementation, several types of formworks are using in the construction works are conventional, steel, aluminum, peri-system, fiberglass, that’s will make their contribution in the implementation of concrete construction structures. the selection for use of the formwork method are important role in achieving the success of the structural work, especially in the terms of costing because it is necessary to do a thorough analysis related to the formwork material used and the method of implementation. This study aims to compare the costs of using polymer system peri formwork, conventional formwork, and steel plate formwork in pier structure construction work.
This research was conducted using descriptive analysis method, the data obtained from various sources were then analyzed and used for the research process in comparing costs. The construction structure reviewed in this study is specifically the pier structure construction consisting of pilecap, column and pierhead.
After analyzing the use of bakesting by reviewing of cost performance, the use of polymer system peri formwork materials required costs IDR 773,879,700,- and with conventional formwork materials required costs IDR 1,391,152,241,- and using steel formwork requires IDR 1,091,953,197,- thus the comparative price index the three formwork materials are 1: 1.8: 1.4.
Downloads
References
Deviana Cahyani, Anjas Handayani, (2021), Analysis Comparison of Plate and Beam Formwork Using Semi Conventional Formwork with Aluminium Formwork System in Terms of Cost and Duration on Vasanta Innopark Project, Journal of Words Comference, 3 (1), 32-39
F. W. Helyar, McGraw Hill, (1978), Construction Estimating and Costing. Toronto, Canada.
Hario Surya Pratama, Rosaria Kristy Anggraeni, Arif Hidayat, Riqi Radian Khasani (2017) Analisa perbandingan penggunaan bekisting konvensional, semi sistem, dan sistem (peri) pada kolom gedung bertingkat, Jurnal Karya Teknik Sipil, 6(1), 303-313
Ihsan, R.I. (2020) Analisis
Perbandingan Waktu Dan Biaya
Bekisting Metode Konvensional Dengan Metode Aluminium Formwork Pada Proyek Bess Mansion Surabaya.
I Made Pandu Weda Wiguna, I Gusti Agung Adnyana Putera, G.A.P Candra Dharmayanti (2018) Analisis Penghematan Biaya Penggunaan Bekisting Pelat Lantai Konvensional Model Panel Pada Bangunan Tipikal (Studi Kasus Pada Proyek Amartha Residence), Jurnal Spektran, 6(1), (59-64).
Ms. Aakanksha Dilip Chaudhary, (2017) Study of Tunnel Formwork System & Comparative Analysis with Conventional Formwork
https://www.ijser.org/online International Journal of Scientific & Engineering Research Volume 8 (5).
M Rizal Wahyudi, Astuti Boer (2019), Tingkat Efisiensi Biaya Pekerjaan Bekisting Struktur Core Wall Menggunakan Metode Semi Sistem dan Climbing System, Jurnal Saintis, 19(2), (51-59)
Muhamad, A. (2005). Model Penilaian Kewajaran Harga Penawaran Kontraktor dengan Sistem Evaluasi Nilai. Jurnal Teknik Sipil, 12(3), 185–200.
Peraturan Menteri Pekerjaan Umum dan Perumahan Rakyat Nomor 1 tahun 2022, tentang pedomana penyusunan perkiraan biaya pekerjaan konstruksi bidang pekerjaan umum dan perumahan rakyat.
Steven, Jane Sekarsari Tamtana (2020)., Penerapan Value Engineering dalam pemilihan jenis bekisting kolom beton pada konstruksi gedung bertingkat Jurnal Mitra Teknik Sipil, Volume 3(2), (267-268).
Susanti, I. I. (2019). Analisa Perbandingan Metode Konvensional, Desklab dan Bondek pada Pekerjaan Bekisting Jembatan Girder Tipe I Pada Proyek Jalan Tol Bogor–Ciawi–Sukabumi. Rekayasa Sipil, 8(2), (50-57).
SNI 7973: 2013, Spesifikasi Desain untuk Konstruksi Kayu.
Downloads
Additional Files
Published
How to Cite
Issue
Section
License
The copyright to this article is transferred to Universitas Mercu Buana (UMB) if and when the article is accepted for publication. The undersigned hereby transfers any and all rights in and to the paper including without limitation all copyrights to UMB. The undersigned hereby represents and warrants that the paper is original and that he/she is the author of the paper, except for material that is clearly identified as to its original source, with permission notices from the copyright owners where required. The undersigned represents that he/she has the power and authority to make and execute this assignment.
We declare that:
1. This paper has not been published in the same form elsewhere.
2. It will not be submitted anywhere else for publication prior to acceptance/rejection by this Journal.
3. A copyright permission is obtained for materials published elsewhere and which require this permission for reproduction.
Furthermore, I/We hereby transfer the unlimited rights of publication of the above mentioned paper in whole to UMB. The copyright transfer covers the exclusive right to reproduce and distribute the article, including reprints, translations, photographic reproductions, microform, electronic form (offline, online) or any other reproductions of similar nature.
The corresponding author signs for and accepts responsibility for releasing this material on behalf of any and all co-authors. This agreement is to be signed by at least one of the authors who have obtained the assent of the co-author(s) where applicable. After submission of this agreement signed by the corresponding author, changes of authorship or in the order of the authors listed will not be accepted.
Retained Rights/Terms and Conditions
1. Authors retain all proprietary rights in any process, procedure, or article of manufacture described in the Work.
2. Authors may reproduce or authorize others to reproduce the Work or derivative works for the authors personal use or for company use, provided that the source and the UMB copyright notice are indicated, the copies are not used in any way that implies UMB endorsement of a product or service of any employer, and the copies themselves are not offered for sale.
3. Although authors are permitted to re-use all or portions of the Work in other works, this does not include granting third-party requests for reprinting, republishing, or other types of re-use.
This work is also licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
