Prototype Automasi Greenhouse Dengan Monitoring Menggunakan Smartphone Dan Esp32 Berbasis Internet of Things
DOI:
https://doi.org/10.22441/jte.2022.v13i3.010Keywords:
Internet Of Things, Sensor, Otomasi Greenhouse, SmartphoneAbstract
Greenhouse merupakan salah satu media budidaya tanaman dengan memanfaatkan ruang tertutup yang setiap dindingnya ditutupi menggunakan bahan transparan atau tembus cahaya. Banyaknya faktor yang dapat memengaruhi produktivitas tanaman dalam greenhouse, salah satunya yaitu faktor mikroklimat yang mempengaruhi produktivitas tanaman dalam proses panennya. Sehingga terdapat teknologi yang mengoptimalkan faktor-faktor pendukung tersebut, yang disebut sebagai teknologi Otomasi greenhouse. Pada tugas akhir ini, pemanfaatan Otomasi greenhouse digunakan untuk memantau faktor-faktor yang mempengaruhi pertumbuhan dan produktivitas dari tanaman, seperti intensitas cahaya, kelembapan udara, kelembapan tanah, dan suhu udara yang terpantau secara realtime melalui Smartphone dan sensor-sensor yang terintegrasi, dengan memanfaatkan ESP32 sebagai mikrokontrolernya. Penyiraman secara terjadwal dan otomatis juga dapat diatur untuk mempermudah dalam melakukan perlakuan intensitas penyiraman terhadap tanaman yang berbeda.
Downloads
References
H. S. Nida, M. Faiqurahman, and Z. Sari, “Prototype Sistem Multi-Telemetri Wireless Untuk Mengukur Suhu Udara Berbasis Mikrokontroler ESP8266 Pada Greenhouse - UMM Institutional Repository,” Umm.ac.id, Aug. 2017, doi: https://eprints.umm.ac.id/37428/19/Peer%20Review%20-%20Faiqurahman%20-%20Telemetri%20Wireless%20ESP8266%20DHT11%20Greenhouse.pdf.
Saw and Win Sandar Aung, “Monitoring and Controlling Device for Smart Greenhouse by using Thinger.io IoT Server,” International Journal of Trend in Scientific Research and Development, vol. Volume-3, no. Issue-4, Jun. 2019.
S. N. S. Al-Humairi, P. Manimaran, M. I. Abdullah and J. Daud, "A Smart Automated Greenhouse: Soil Moisture, Temperature Monitoring and Automatic Water Supply System (Peaty, Loam and Silty)," 2019 IEEE Conference on Sustainable Utilization and Development in Engineering and Technologies (CSUDET), 2019, pp. 111-115, doi: 10.1109/CSUDET47057.2019.9214661.
H. Andrianto, Suhardi and A. Faizal, "Development of Smart Greenhouse System for Hydroponic Agriculture," 2020 International Conference on Information Technology Systems and Innovation (ICITSI), 2020, pp. 335-340, doi: 10.1109/ICITSI50517.2020.9264917.
Y. Hirsch, L. Rinehart and Y. Goldenberg, "Applications of digital PWM integrated circuits," 1986 IEEE Applied Power Electronics Conference and Exposition, 1986, pp. 171-177, doi: 10.1109/APEC.1986.7073333.
M. T. Ismail, M. N. Ismail, S. S. Sameon, Z. M. Zin and N. Mohd, "Wireless Sensor Network: Smart greenhouse prototype with smart design," 2016 2nd International Symposium on Agent, Multi-Agent Systems and Robotics (ISAMSR), 2016, pp. 57-62, doi: 10.1109/ISAMSR.2016.7810003.
G. M. Kurian, P. A. Jeyanthy, D. Devaraj and P. G. Anilkumar, "RTC Based Solar Power Multi-Level Inverter," 2018 International Conference on Advances in Computing, Communications and Informatics (ICACCI), 2018, pp. 1875-1880, doi: 10.1109/ICACCI.2018.8554496.
S. Muryani, and S. Sumariyah, "Aplikasi Modul Sensor Cahaya Gy-302 BH1750 Dan Sensor Jarak Ultrasonik Hc-Sr04 Pada Eksperimen Fotometer Berbasis Mikrokontroler Arduino Uno," BERKALA FISIKA, vol. 23, no. 4, pp. 142-150, Nov. 2020.
S. Pandey and A. Pandey, “Greenhouse Technology”, Int. J. Res. Granthaalayah, vol. 3, no. 9SE, pp. 1–3, Sep. 2015.
H. S. Nida, M. Faiqurahman, and Z. Sari, “Prototype Sistem Multi-Telemetri Wireless Untuk Mengukur Suhu Udara Berbasis Mikrokontroler ESP8266 Pada Greenhouse”, KINETIK, vol. 2, no. 3, pp. 217-226, Jul. 2017.
S. M. Rezvani et al., “IoT-Based Sensor Data Fusion for Determining Optimality Degrees of Microclimate Parameters in Commercial Greenhouse Production of Tomato,” Sensors, vol. 20, no. 22, p. 6474, Nov. 2020, doi: 10.3390/s20226474.
A. Sofwan, S. Sumardi, A. I. Ahmada, I. Ibrahim, K. Budiraharjo and K. Karno, "Smart Greetthings: Smart Greenhouse Based on Internet of Things for Environmental Engineering," 2020 International Conference on Smart Technology and Applications (ICoSTA), 2020, pp. 1-5, doi: 10.1109/ICoSTA48221.2020.1570614124.
A. Zarnescu, R. Ungurelu and G. Varzaru, "Controlling the Temperature and Humidity in a Greenhouse," 2019 IEEE 25th International Symposium for Design and Technology in Electronic Packaging (SIITME), 2019, pp. 168-171, doi: 10.1109/SIITME47687.2019.8990886.
J. Andika, E. Permana, and S. Attamimi, “Perancangan Sistem Otomatisasi dan Monitoring Perangkat Perawatan Tanaman Hias Berbasis Internet of Things,” Jurnal Teknologi Elektro, vol. 13, no. 2, pp. 100–107, 2022, doi: 10.22441/jte.2022.v13i2.007.
Downloads
Published
How to Cite
Issue
Section
License
The copyright to this article is transferred to Universitas Mercu Buana (UMB) if and when the article is accepted for publication. The undersigned hereby transfers any and all rights in and to the paper including without limitation all copyrights to UMB. The undersigned hereby represents and warrants that the paper is original and that he/she is the author of the paper, except for material that is clearly identified as to its original source, with permission notices from the copyright owners where required. The undersigned represents that he/she has the power and authority to make and execute this assignment.
We declare that:
1. This paper has not been published in the same form elsewhere.
2. It will not be submitted anywhere else for publication prior to acceptance/rejection by this Journal.
3. A copyright permission is obtained for materials published elsewhere and which require this permission for reproduction.
Furthermore, I/We hereby transfer the unlimited rights of publication of the above mentioned paper in whole to UMB. The copyright transfer covers the exclusive right to reproduce and distribute the article, including reprints, translations, photographic reproductions, microform, electronic form (offline, online) or any other reproductions of similar nature.
The corresponding author signs for and accepts responsibility for releasing this material on behalf of any and all co-authors. This agreement is to be signed by at least one of the authors who have obtained the assent of the co-author(s) where applicable. After submission of this agreement signed by the corresponding author, changes of authorship or in the order of the authors listed will not be accepted.
Retained Rights/Terms and Conditions
1. Authors retain all proprietary rights in any process, procedure, or article of manufacture described in the Work.
2. Authors may reproduce or authorize others to reproduce the Work or derivative works for the authors personal use or for company use, provided that the source and the UMB copyright notice are indicated, the copies are not used in any way that implies UMB endorsement of a product or service of any employer, and the copies themselves are not offered for sale.
3. Although authors are permitted to re-use all or portions of the Work in other works, this does not include granting third-party requests for reprinting, republishing, or other types of re-use.
