Soil Energy Harvester for Batteryless Wireless Sensor Network Node using Redox Method
DOI:
https://doi.org/10.22441/jte.2023.v14i1.009Kata Kunci:
Wireless Sensor Network, Battery less, Redox, soil energy harvester.Abstrak
The Wireless Sensor Network technologies has great advantage that provide us with cheap solution to deal with telecommunication infrastructure problem that don’t exist in extreme and isolated area. However, the biggest problem exist within wireless sensor network was WSN node limited power. In this paper we try to provide battery less power sources for Wireless Sensor Network Node using Redox method. Using 9 combinations of electrodes circuits, it can provide 6.53 volt and turn on Arduino Mini Pro microcontroller. However, the second it turns on Arduino Mini Pro the voltage drops to 1.73 Volts. Hence this energy harvester can provide power to the Arduino Mini Pro microcontroller with unstable power supply.Unduhan
Referensi
ITU-T, “Recommendation ITU-T Y.2221: Requirements for Support of Ubiquitous Sensor Network (USN) Applications and Services in the NGN Environment.” p. 32, 2010.
A. M. Baharudin and W. Yan, “Long-range wireless sensor networks for geo-location tracking: Design and evaluation,” Proc. - 2016 Int. Electron. Symp. IES 2016, 2017, doi: 10.1109/ELECSYM.2016.7860979.
F. Arslan, “On the Wireless Sensor Network for Medical Instruments Monitoring System,” Int. J. Sci. Eng. Res., vol. 9, no. 8, pp. 88–96, 2018.
C. Del-Valle-Soto, C. Mex-Perera, J. A. Nolazco-Flores, R. Velázquez, and A. Rossa-Sierra, “Wireless sensor network energy model and its use in the optimization of routing protocols,” Energies, vol. 13, no. 3, pp. 1–33, 2020, doi: 10.3390/en13030728.
K. Dorling, G. G. Messier, S. Valentin, and S. Magierowski, “Minimizing the Net Present Cost of Deploying and Operating Wireless Sensor Networks,” IEEE Trans. Netw. Serv. Manag., 2015, doi: 10.1109/TNSM.2015.2464071.
J. Prasad and R. K. Tripathi, “Energy harvesting from sediment microbial fuel cell to supply uninterruptible regulated power for small devices,” Int. J. Energy Res., 2019, doi: 10.1002/er.4370.
Mulyadi and R. W. Arsianti, “Low Power Electrical Generator from Soil Microbial Fuel Cell,” 2018 Electr. Power, Electron. Commun. Control. Informatics Semin. EECCIS 2018, 2018, doi: 10.1109/EECCIS.2018.8692948.
Y. Huang, D. Xu, J. Kan, and W. Li, “Study on field experiments of forest soil thermoelectric power generation devices,” PLoS One, 2019, doi: 10.1371/journal.pone.0221019.
C. Y. Ying and J. Dayou, “Modelling of the electricity generation from living plants,” J. Teknol., 2016, doi: 10.11113/jt.v78.3704.
E. Popek, “Practical Approach to Sampling,” in Sampling and Analysis of Environmental Chemical Pollutants, 2018, pp. 145–225.
Garba Shehu, “Two Ideas of Redox Reaction: Misconceptions and Their Challeges in Chemistry Educationn,” IOSR J. Res. Method Educ., vol. 5, no. 1, pp. 15–20, 2015, doi: 10.9790/7388-05111520.
M. Ghufron, I. Soepriyanto, C. A. Perwita, and K. Pranata, “Analisis Efisiensi Energi Flow Baterai Lead Acid Keadaan Statis Dan Dinamis,” ROTOR, vol. 10, no. 2, doi: 10.19184/rotor.v10i2.5912.
Atmel, “ATmega328P,” AVR Microcontrollers. 2016.
B. Thoen, G. Callebaut, G. Leenders, and S. Wielandt, “A deployable LPWAN platform for low-cost and energy-constrained iot applications,” Sensors (Switzerland), vol. 19, no. 3, Feb. 2019, doi: 10.3390/S19030585.
B. Delinchant, H. A. Dang, H. T. T. Vu, and D. Q. Nguyen, “Massive arrival of low-cost and low-consuming sensors in buildings: Towards new building energy services,” in IOP Conference Series: Earth and Environmental Science, 2019, doi: 10.1088/1755-1315/307/1/012006.
Unduhan
Diterbitkan
Cara Mengutip
Terbitan
Bagian
Lisensi
The copyright to this article is transferred to Universitas Mercu Buana (UMB) if and when the article is accepted for publication. The undersigned hereby transfers any and all rights in and to the paper including without limitation all copyrights to UMB. The undersigned hereby represents and warrants that the paper is original and that he/she is the author of the paper, except for material that is clearly identified as to its original source, with permission notices from the copyright owners where required. The undersigned represents that he/she has the power and authority to make and execute this assignment.
We declare that:
1. This paper has not been published in the same form elsewhere.
2. It will not be submitted anywhere else for publication prior to acceptance/rejection by this Journal.
3. A copyright permission is obtained for materials published elsewhere and which require this permission for reproduction.
Furthermore, I/We hereby transfer the unlimited rights of publication of the above mentioned paper in whole to UMB. The copyright transfer covers the exclusive right to reproduce and distribute the article, including reprints, translations, photographic reproductions, microform, electronic form (offline, online) or any other reproductions of similar nature.
The corresponding author signs for and accepts responsibility for releasing this material on behalf of any and all co-authors. This agreement is to be signed by at least one of the authors who have obtained the assent of the co-author(s) where applicable. After submission of this agreement signed by the corresponding author, changes of authorship or in the order of the authors listed will not be accepted.
Retained Rights/Terms and Conditions
1. Authors retain all proprietary rights in any process, procedure, or article of manufacture described in the Work.
2. Authors may reproduce or authorize others to reproduce the Work or derivative works for the authors personal use or for company use, provided that the source and the UMB copyright notice are indicated, the copies are not used in any way that implies UMB endorsement of a product or service of any employer, and the copies themselves are not offered for sale.
3. Although authors are permitted to re-use all or portions of the Work in other works, this does not include granting third-party requests for reprinting, republishing, or other types of re-use.
