Perancangan Prototipe Indikator Kapasitas Penyimpanan Level Tangki Minyak Dengan Sensor Ultra Sonic, DHT11, dan MQ-2 Secara Digital Berbasis Arduino Uno R3
DOI:
https://doi.org/10.22441/jte.2020.v11i2.006Keywords:
Sensor Ultra Sonic, Sensor DHT11, Sensor MQ-2, Arduino UNO R3Abstract
Pada rangkaian perancangan prototype kapasitas penyimpanan level tangki minyak dengan sensor Ultra Sonic, DHT11, dan MQ-2 secara digital berbasis Arduino yang kami buat ini menggunakan bak air sebagai pengganti tangki minyak dan tiga sensor dengan sistem prototype indikator penyimpanan pada tangki minyak ini berkerja berdasarkan kondisi tangki yang digunankan di karenakan tiga sensor tersebut harus dikalibrasi dahulu sebelum digunakan untuk mendapatkan hasil indikator yang maksimal dan hasil pengukurannya akan di tampilkan pada layar indikator, yaitu Sensor Ultra Sonic untuk mengetahui indikator level penyimpanan pada dalam tangki minyak, Sensor DHT11 yang berfungsi untuk menampilkan indikator suhu dan kelembapan di dalam tangki penyimpanan, dan Sensor MQ-2 yang berfungsi untuk mengetahui adanya kebocoran gas yang di letakkan diluar dekat tempat masuknya minyak kedalam tangki penyimpanan. Tiga buah sensor tersebut dikendalikan dengan mikrokontroler jenis Arduino UNO R3 yang berfungsi untuk memproses data sensor yang kemudian akan di teampilkan dalam layar LCD berukuran 2x16 sebagai penampil seluruh data yang diproses sebelumnya.
Downloads
References
Sumardi S, Ilham Syah P. Rancang Bangun Monitoring Ketinggian Air Dan Sistem Kontrol Pada Pintu Air Berbasis Arduino Dan Sms Gateway. Tangerang: Universitas Muhammadiyah Tanggerang. 2018.
Ulfah Mediaty A. Pengujian Sensor Ultrasonik PING untuk Pengukuran Level Ketinggian dan Volume Air. Semarang: Jurnal Ilmiah “Elektrikal Enjiniring” UNHAS. 2011.
Nur Roin Z. Prototype Sistem Pengaturan Level Air Menggunakan Sensor Ultrasonik pada Industri Minuman. Jember: Digital Repository Universitas Jember. 2015.
Ilfan A. Automatic Water Level Control Berbasis Mikrocontroller Dengan Sensor Ultrasonik. Semarang: UNNES. 2015.
Amelia A , Adnan Rafi A. Sistem Kendali dan Pemantauan Ketinggian Air pada Tangki Berbasis Sensor Ultrasonik. KOPERTIP: Jurnal Ilmiah Manajemen Informatika dan Komputer. 2017.
Bakhtiyar A , Bambang S. Aplikasi Sensor Ultrasonik Untuk Deteksi Posisi Jarak Pada Ruang Menggunakan Arduino Uno. Surabaya: Universitas Negri Surabaya. 2017.
Riki Ruli A. Siregar, Rifky R. Model Sistem Monitoring Tangki Bahan Bakar Minyak Spbu Dengan Menggunakan Web Aplikasi Dan Sms Gateway. Jakarta Barat: JETri. 2015.
Dwi H, Dasril, Aryanto H. Perancangan Prototype Indikator Bahan Bakar Digital Berbasis Arduino Uno Pada Sepeda Motor. Tanjungpura: Universitas Tanjungpura. 2017
Muhammad Dio K, Endro A, Sidik P. Perancangan Dan Implementasi Pengaktifan Water Heater Dan Pemantauan Suhu Dan Ketinggian Air Pada Bak Mandi Dengan Sensor Ultrasonik Dan Sensor Suhu Menggunakan Arduino Berbasis Android. Bandung: e-Proceeding of Engineering. 2016.
Yusuf I, Rizky H. Sistem Kontrol Level Ketinggian Air pada Tandon Menggunakan SMS Berbasis Smart Relay. Prosiding SENTIA. 2009.
Downloads
Published
How to Cite
Issue
Section
License
The copyright to this article is transferred to Universitas Mercu Buana (UMB) if and when the article is accepted for publication. The undersigned hereby transfers any and all rights in and to the paper including without limitation all copyrights to UMB. The undersigned hereby represents and warrants that the paper is original and that he/she is the author of the paper, except for material that is clearly identified as to its original source, with permission notices from the copyright owners where required. The undersigned represents that he/she has the power and authority to make and execute this assignment.
We declare that:
1. This paper has not been published in the same form elsewhere.
2. It will not be submitted anywhere else for publication prior to acceptance/rejection by this Journal.
3. A copyright permission is obtained for materials published elsewhere and which require this permission for reproduction.
Furthermore, I/We hereby transfer the unlimited rights of publication of the above mentioned paper in whole to UMB. The copyright transfer covers the exclusive right to reproduce and distribute the article, including reprints, translations, photographic reproductions, microform, electronic form (offline, online) or any other reproductions of similar nature.
The corresponding author signs for and accepts responsibility for releasing this material on behalf of any and all co-authors. This agreement is to be signed by at least one of the authors who have obtained the assent of the co-author(s) where applicable. After submission of this agreement signed by the corresponding author, changes of authorship or in the order of the authors listed will not be accepted.
Retained Rights/Terms and Conditions
1. Authors retain all proprietary rights in any process, procedure, or article of manufacture described in the Work.
2. Authors may reproduce or authorize others to reproduce the Work or derivative works for the authors personal use or for company use, provided that the source and the UMB copyright notice are indicated, the copies are not used in any way that implies UMB endorsement of a product or service of any employer, and the copies themselves are not offered for sale.
3. Although authors are permitted to re-use all or portions of the Work in other works, this does not include granting third-party requests for reprinting, republishing, or other types of re-use.
