PENGATURAN KECEPATAN PUTARAN MOTOR INDUKSI 3 PHASA DENGAN LABVIEW BERBASIS ETHERNET PLC OMRON
DOI:
https://doi.org/10.22441/jte.v9i2.4069Abstract
Semakin berkembangnya teknik elektro daya dalam industri, sehingga motor induksi lebih banyak digunakan. Salah satunya dengan dikembangkan inverter, motor induksi lebih mudah pengaturan kecepatan putaran motor. Pada penelitian ini pengaturan kecepatan putaran motor dengan menentukan perubahan frekuensi dari inverter, dimana perubahan frekuensi akan dikontrol dengan mengunakan PLC Omron CJ1M berdasarkan perubahan tegangan dari keluaran DAC MAD 42. Pengaturan dan Monitoring akan dikendalikan melalui Human Machine Interface dengan menggunakan Aplikasi Labview berbasis Ethernet dengan memanfaatkan acces point TP Link atau berbasis wifi. Dari hasil percobaan yang dilakukan sistem berjalan sesuai dengan rencana, labview dan PLC Omron dapat dengan mudah dikoneksikan tanpa mengalami hambatan. Data yang diperoleh dari hasil percobaan didapat Pengujian putaran motor memiliki penyimpangan rata-rata sebesar 4,57 rpm. Pengujian frekuensi motor memiliki penyimpangan rata-rata sebesar 0,204 Hz. Pengujian tegangan keluaran DAC memiliki penyimpangan rata-rata sebesar 0,0023 Vdc.
Kata Kunci : Inverter, Human Machine Interface, Inverter, Labview, Motor Induks, PLC.
Downloads
Downloads
Published
How to Cite
Issue
Section
License
The copyright to this article is transferred to Universitas Mercu Buana (UMB) if and when the article is accepted for publication. The undersigned hereby transfers any and all rights in and to the paper including without limitation all copyrights to UMB. The undersigned hereby represents and warrants that the paper is original and that he/she is the author of the paper, except for material that is clearly identified as to its original source, with permission notices from the copyright owners where required. The undersigned represents that he/she has the power and authority to make and execute this assignment.
We declare that:
1. This paper has not been published in the same form elsewhere.
2. It will not be submitted anywhere else for publication prior to acceptance/rejection by this Journal.
3. A copyright permission is obtained for materials published elsewhere and which require this permission for reproduction.
Furthermore, I/We hereby transfer the unlimited rights of publication of the above mentioned paper in whole to UMB. The copyright transfer covers the exclusive right to reproduce and distribute the article, including reprints, translations, photographic reproductions, microform, electronic form (offline, online) or any other reproductions of similar nature.
The corresponding author signs for and accepts responsibility for releasing this material on behalf of any and all co-authors. This agreement is to be signed by at least one of the authors who have obtained the assent of the co-author(s) where applicable. After submission of this agreement signed by the corresponding author, changes of authorship or in the order of the authors listed will not be accepted.
Retained Rights/Terms and Conditions
1. Authors retain all proprietary rights in any process, procedure, or article of manufacture described in the Work.
2. Authors may reproduce or authorize others to reproduce the Work or derivative works for the authors personal use or for company use, provided that the source and the UMB copyright notice are indicated, the copies are not used in any way that implies UMB endorsement of a product or service of any employer, and the copies themselves are not offered for sale.
3. Although authors are permitted to re-use all or portions of the Work in other works, this does not include granting third-party requests for reprinting, republishing, or other types of re-use.
