Integrated Control of River Overflow Based on Microcontroller
DOI:
https://doi.org/10.22441/jte.2023.v14i1.003Kata Kunci:
floodgate, microcontroller, overflow, pump, reservoir, river, water.Abstrak
This river overflow control is carried out in stages and in an integrated manner. The river water level is detected in real time with four levels, namely normal, alert, standby, and beware. The overflow of river water at each level will flow automatically through three floodgates that work simultaneously, followed by turning on three water pumps which also work simultaneously. The water flowing from the floodgates is channeled into an irrigation area, while the pumped water is flowed into a reservoir. This river overflow control is carried out in an integrated manner between monitoring the river water level, opening and closing the floodgates, working the pump, and detecting the reservoir maximum level. When all the floodgates are fully open and all pumps are running, and the water level in the reservoir has reached the maximum limit, the alarm will sound. Such conditions are stated in a state of over flow or out of control. This control is based on a microcontroller so that it has a fast response with minimal components. The control system is designed and made in a miniature form that runs well and with a fast response time.
Unduhan
Referensi
M. Amin, N. Harun, M. Saleh, Z.B. Hasanuddin, “Using Microcontroler For The Monitoring Water Level in Jeneberang River to Control of Flooding and Water Crisis in Makasar City.” International Journal of Civil Engineering and Technology, Vol. 10, No. 6, pp. 112-120, 2019.
S. Monk, “Programming Arduino : Getting started with sketches”, New York. McGraw-Hill Education, 2016.
S. Nicholas, “Arduino Programming: Advanced Methods and Strategies to Learn Arduino Programming”. Inde pendently published, 2020.
CH. N. Soni, CH. Sarita, S. Maheshwari, B. K. Sahu, B. Jain, & G. Shrivastava, “Distance measurement using ultrasonic sensor and Arduino,” International Journal of ngineering Science and Computing, Vol. 7, No. 3, pp. 5991-5992. 2017.
F. -Puspasari, I. Fahrurrozi, T. P. Satya, G. Setyawan, M. R. Al Fauzan, and E. M. D. Admoko, “Sensor Ultrasonik HCSR04 Berbasis Arduino Due Untuk Sistem Monitoring Ketinggian,” Jurnal Fisika dan Aplikasinya, vol. 15, no. 2, p. 36, Jun. 2019, doi: 10.12962/j24604682.v15i2.4393.
S. Sunitha, “Distance measurement using ultrasonic sensor and node MCU,” International Research Journal of Engineering and Technology, Vol. 4, No. 6, pp.1794-1797. 2017.
J. Waworundeng, L. D. Irawan, and C. A. Pangalila, “Implementasi Sensor PIR sebagai Pendeteksi Gerakan untuk Sistem Keamanan Rumah menggunakan Platform IoT,” CogITo Smart Journal, vol. 3, no. 2, pp. 152–163, Dec. 2017, doi: 10.31154/cogito.v3i2.65.152-163.
M.D. Wright, “Using the NRF24L01 2.4 GHz RF Control Module with the Arduino,” Maryland. Create Space, 2017
Unduhan
Diterbitkan
Cara Mengutip
Terbitan
Bagian
Lisensi
The copyright to this article is transferred to Universitas Mercu Buana (UMB) if and when the article is accepted for publication. The undersigned hereby transfers any and all rights in and to the paper including without limitation all copyrights to UMB. The undersigned hereby represents and warrants that the paper is original and that he/she is the author of the paper, except for material that is clearly identified as to its original source, with permission notices from the copyright owners where required. The undersigned represents that he/she has the power and authority to make and execute this assignment.
We declare that:
1. This paper has not been published in the same form elsewhere.
2. It will not be submitted anywhere else for publication prior to acceptance/rejection by this Journal.
3. A copyright permission is obtained for materials published elsewhere and which require this permission for reproduction.
Furthermore, I/We hereby transfer the unlimited rights of publication of the above mentioned paper in whole to UMB. The copyright transfer covers the exclusive right to reproduce and distribute the article, including reprints, translations, photographic reproductions, microform, electronic form (offline, online) or any other reproductions of similar nature.
The corresponding author signs for and accepts responsibility for releasing this material on behalf of any and all co-authors. This agreement is to be signed by at least one of the authors who have obtained the assent of the co-author(s) where applicable. After submission of this agreement signed by the corresponding author, changes of authorship or in the order of the authors listed will not be accepted.
Retained Rights/Terms and Conditions
1. Authors retain all proprietary rights in any process, procedure, or article of manufacture described in the Work.
2. Authors may reproduce or authorize others to reproduce the Work or derivative works for the authors personal use or for company use, provided that the source and the UMB copyright notice are indicated, the copies are not used in any way that implies UMB endorsement of a product or service of any employer, and the copies themselves are not offered for sale.
3. Although authors are permitted to re-use all or portions of the Work in other works, this does not include granting third-party requests for reprinting, republishing, or other types of re-use.
