Design and Construction of a Pineapple Skin Cutting Machine with a Pneumatic Actuator Drive Powered by a Solar Module with a Capacity of 200 WP
DOI:
https://doi.org/10.22441/jtm.v14i1.25515Keywords:
Actuator Pneumatic, Pineapple Cutting Machine, Solar Module, Compressed airAbstract
The main objective of this research is to carried out the design of a pineapple cutting machine with a pneumatic actuator powered by a solar module with a capacity of 200 WP. The research methods used are literature study and experimental laboratory. The laboratory experimental method is very suitable to be applied to post-harvest agricultural machines with a small capacity where the research is only focused on the success of the actuator system in carrying out pineapple cutting movements automatically by utilizing pressurized air coming from the compressor. The variation in air pressure for the pneumatic actuator is set at the air pressure, namely 3, 4, and 5 Bar. The actual peeling capacity using air pressure of 3 Bar resulted in 160 pineapple cutting/per hour, 170 fruit/per hour for 4 Bar, 173 bar for 5 bar, and 173 fruit/per hour manually.Downloads
References
. R. Arizona and S. Kurniadi, “Studi Kinerja Pemanfaatan Modul Surya Pada Mesin Pemotong Nanas Berbasis Aktuator Pneumatik,” Jurnal Teknik Mesin, vol. 10, no. 3, pp. 158–167, 2021.
. I. Fahrizal, B. Ningsih, E. Parhadi, and L. D. Anjiu, “Pembuatan Alat Pengupas Nanas Sistem Press,” vol. 1, no. 1, pp. 17–21, 2023.
. A. Dzulqornaini and P. Adiwibowo, “Rancang Bangun Mesin Pengupas Kulit Nanas Semi Otomatis,” Jurnal Rekayasa Mesin (JRM), vol. 02, p. 6, 2015.
. M. Dan Nurdiana, “MEKANIK,” Jurnal Ilmiah Teknik Mesin ITM, vol. 6, no. 1, pp. 1–9.
. P. G. A. L. Siriwardhana and D. C. Wijewardane, “Machine for the Pineapple Peeling Process,” Engineering and Technology of the Open University of Sri Lanka, vol. 6, no. 1, pp. 1–15, 2018.
. Mansur and Nurdiana, “Rancang Ulang Mesin Pengupas Nanas Dengan Menggunakan Engkol Penekan Kapasitas 200 Buah / Jam,” Jurnal Ilmiah Teknik Mesin ITM, vol. 6, no. 1, pp. 1–9, 2020.
. M. U. M. Krishna Prakasha, Vinay B U Shivakumar, “Automated Pineapple Peeling and Slicing Machine,” International Journal of Current Engineering and Scientific Research (IJCESR), vol. 4, no. 4, pp. 12–15, 2017.
. R. E. Putri, D. I. Maulana, and A. Hasan, “Pengembangan Alat Pengupas Kulit Nanas (Ananas comosus) Semi Mekanis,” Jurnal Keteknikan Pertanian Tropis dan Biosistem, vol. 9, no. 2, pp. 183–193, 2021, doi: 10.21776/ub.jkptb.2021.009.02.09.
. H. Rahman and Sunarto, “Rancang Bangun Mesin Pengupas Kulit Buah Aren Menggunakan Motor Listrik Sebagai Tenaga Penggerak,” Inovtek seri mesin, vol. 3, no. 1, pp. 39–44, 2020.
. W. Yenanta and S. Khalis Utama, “Teknologi Pembangkit Listrik Tenaga Surya Untuk Penggerak Energi Listrik pada Mesin Pengupas Nanas,” Sinergi Polmed: Jurnal Ilmiah Teknik Mesin, vol. 04, no. 02, pp. 87–94, 2023.
Downloads
Additional Files
Published
How to Cite
Issue
Section
License
The copyright to this article is transferred to Universitas Mercu Buana (UMB) if and when the article is accepted for publication. The undersigned hereby transfers any and all rights in and to the paper including without limitation all copyrights to UMB. The undersigned hereby represents and warrants that the paper is original and that he/she is the author of the paper, except for material that is clearly identified as to its original source, with permission notices from the copyright owners where required. The undersigned represents that he/she has the power and authority to make and execute this assignment.
We declare that:
1. This paper has not been published in the same form elsewhere.
2. It will not be submitted anywhere else for publication prior to acceptance/rejection by this Journal.
3. A copyright permission is obtained for materials published elsewhere and which require this permission for reproduction.
Furthermore, I/We hereby transfer the unlimited rights of publication of the above mentioned paper in whole to UMB. The copyright transfer covers the exclusive right to reproduce and distribute the article, including reprints, translations, photographic reproductions, microform, electronic form (offline, online) or any other reproductions of similar nature.
The corresponding author signs for and accepts responsibility for releasing this material on behalf of any and all co-authors. This agreement is to be signed by at least one of the authors who have obtained the assent of the co-author(s) where applicable. After submission of this agreement signed by the corresponding author, changes of authorship or in the order of the authors listed will not be accepted.
Retained Rights/Terms and Conditions
1. Authors retain all proprietary rights in any process, procedure, or article of manufacture described in the Work.
2. Authors may reproduce or authorize others to reproduce the Work or derivative works for the authors personal use or for company use, provided that the source and the UMB copyright notice are indicated, the copies are not used in any way that implies UMB endorsement of a product or service of any employer, and the copies themselves are not offered for sale.
3. Although authors are permitted to re-use all or portions of the Work in other works, this does not include granting third-party requests for reprinting, republishing, or other types of re-use.
This work is also licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
