STUDI KINERJA PEMANFAATAN MODUL SURYA PADA MESIN PEMOTONG NANAS BERBASIS AKTUATOR PNEUMATIK
DOI:
https://doi.org/10.22441/jtm.v10i3.13861Keywords:
Aktuator Pneumatik, Modul Surya, Teknologi PascapanenAbstract
Modul surya yang dikomersialisasikan saat ini sangat mampu menjadi penyuplai sumber energi listrik utama pada setiap peralatan maupun mesin yang ada. Salah satu mesin yang dapat disuplai dengan modul surya sebagai sumber energi listrik utamanya yaitu mesin pemotong nanas berbasis pneumatik. selama ini, masyarakat menggunakan beberapa peralatan untuk bisa menghasilkan daging nanas dengan alat yang terpisah, sehingga proses tersebut tidak efisien dan membutuhkan banyak tenaga manusia. Tujuan penelitian ini yaitu memanfatkan modul surya sebagai sumber energi listrik utama pada mesin pemotong nanas berbasis aktuator pneumatik dan membuat sebuah teknologi pascapanen yang aman, efisien dan hemat listrik ketika digunakan oleh masyarakat atau para pekerja dibidang pengolahan nanas. Metodologi penelitian pada penelitian ini yaitu melakukan studi literatur, persiapan alat dan bahan, pembuatan mesin pemotong nanas, pengujian kinerja modul surya pada mesin pemotong nanas, pengambilan data, pengolahan data. Kinerja modul surya tertinggi di peroleh pada pengujian ke IV dengan waktu pengujian 120 menit tahap ke 7 dengan nilai efisiensi (η) yang dihasilkan yaitu 7,95%, daya keluaran (Pout) sebesar 30,58watt, Fill Factor sebesar 0,84, daya maksimum (Pmax) sebesar 36,41 watt, arus hubung singakat (Isc) sebesar 4,9 ampere dan untuk nilai arus hubung singkat sebesar 7,43 volt.
Downloads
References
Arifin, M. and Adiwibowo, P. H. (2015) ‘Rancang Bangun Mesin Pengupas Kulit Dan Pemotong Hati Nanas Semi Otomatis’, Jrm, 2(3), pp. 10–15.
Fernando, F. (2013) ‘( Studi Kasus : UD Berkat Bersama ) Oleh : ( Studi Kasus : UD Berkat Bersama )’.
Noersalim, Y., Munir, A. P. and Rohanah, A. (2015) ‘Rancang Bangun Mesin Pengupas Kulit Nanas’, Jurnal Rekayasa Pangan dan Pertanian, 3(2), pp. 152–156.
Septiady, R. K. D. et al. (2018) ‘https://jurnal.umpp.ac.id/index.php/cahaya_bagaskara/index’, 3(1), pp. 1–5.
Tira, H. S., Natsir, A. and Putranto, T. (2020) ‘Kinerja modul surya melalui variasi solar collector dan kecepatan angin’, Dinamika Mesin, 10(1), pp. 25–32.
Downloads
Published
How to Cite
Issue
Section
License
The copyright to this article is transferred to Universitas Mercu Buana (UMB) if and when the article is accepted for publication. The undersigned hereby transfers any and all rights in and to the paper including without limitation all copyrights to UMB. The undersigned hereby represents and warrants that the paper is original and that he/she is the author of the paper, except for material that is clearly identified as to its original source, with permission notices from the copyright owners where required. The undersigned represents that he/she has the power and authority to make and execute this assignment.
We declare that:
1. This paper has not been published in the same form elsewhere.
2. It will not be submitted anywhere else for publication prior to acceptance/rejection by this Journal.
3. A copyright permission is obtained for materials published elsewhere and which require this permission for reproduction.
Furthermore, I/We hereby transfer the unlimited rights of publication of the above mentioned paper in whole to UMB. The copyright transfer covers the exclusive right to reproduce and distribute the article, including reprints, translations, photographic reproductions, microform, electronic form (offline, online) or any other reproductions of similar nature.
The corresponding author signs for and accepts responsibility for releasing this material on behalf of any and all co-authors. This agreement is to be signed by at least one of the authors who have obtained the assent of the co-author(s) where applicable. After submission of this agreement signed by the corresponding author, changes of authorship or in the order of the authors listed will not be accepted.
Retained Rights/Terms and Conditions
1. Authors retain all proprietary rights in any process, procedure, or article of manufacture described in the Work.
2. Authors may reproduce or authorize others to reproduce the Work or derivative works for the authors personal use or for company use, provided that the source and the UMB copyright notice are indicated, the copies are not used in any way that implies UMB endorsement of a product or service of any employer, and the copies themselves are not offered for sale.
3. Although authors are permitted to re-use all or portions of the Work in other works, this does not include granting third-party requests for reprinting, republishing, or other types of re-use.
This work is also licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
