RANCANG BANGUN MINI LAB FLUIDA SEBAGAI OBJEK PENGAMBILAN DATA UNTUK KEPERLUAN PENELITIAN DI UNIVERSITAS MERCUBUANA KERANGGAN
DOI:
https://doi.org/10.22441/jtm.v8i2.4535Keywords:
Lab fluida, perpipaan, pengujianAbstract
Abstrak Lab fluida difungsikan sebagai tempat pengambilan data untuk proses pembelajaran maupun penelitian tentang fluida. Kondisi saat ini belum adanya lab fluida di universitas mercubuana keranggan yang digunakan sebagai objek pengambilan data untuk penelitian. Rancang bangun mini lab fluida dibutuhkan untuk menunjang kegiatan pengambilan data. Studi literatur untuk perancangan menggunakan buku, jurnal, dan internet. Diskusi dilakukan dengan dosen pembimbing dan mahasiswa yang akan melakukan penelitian pada mini lab fluida.Berdasarkan perhitungan beban, meja menggunakan besi hollow 60x40x4. Pompa yang digunakan adalah pompa sentrifugal dengan debit 9 m3/h dan total head 5 m. Pipa yang digunakan adalah pipa galvanis 1 1/2 inch. Valve dengan type ball valve, dan tangki dengan kapasitas 300 L. Pengaturan speed pompa menggunakan VSD (Variabel Speed Drive) dan untuk mengatur voltage menggunakan AVR (Analog Voltage Regulator). Kata kunci : Lab fluida, perpipaan, pengujian Abstract The fluid lab is functioned as a place for retrieving data in order to learn the process and leading research of fluid. At this time, the fluid lab is not yet available in Mercubuana University Kranggan, which is necessary utilized for research. Design and development of mini lab of fluid is necessary accomplished to support activity of collecting data. The references are used in the study of literature for design this research object, such as book, journal and other internet sources. In the process, there are some discussion between preceptor lecturer and the student whose charge in research of mini fluid lab. Based on the calculation of weight forces, the table uses hollow iron in dimension 60x40x4. By using the sentrifugal pump, which has flow capacity of 9 m3/h and total head of 5 m. Also, the galvanic pipe with dimension 1 ½ inch. In addition, other specifications are valve with ball type and the tank in capacity of 300 L. For setting the flow speed of pump is by using VSD (Variable Speed Drive) and AVR (Analog Voltage Regulator) as component for voltage adjusment.Downloads
References
B. Oktama, “Desain Dan Perhitungan Teoritis Pompa Sentrifugal,” no. 2, pp. 149–153, 2014.
Henry Liu, Pipeline Engineering. 2003.
M. IR. SULARSO and P. D. H. TAHARA, “Pompa Dan Kompresor,” p. 290, 2000.
L. Zhu, A. H. Bouzid, and J. Hong, “Analytical evaluation of elastic interaction in bolted flange joints,” Int. J. Press. Vessel. Pip., vol. 165, pp. 176–184, 2018.
Z. Zeitschriftenbericht and A. Hillgruber-Marburg, “Allgemeines,” Hist. Z., vol. 206, no. JG, pp. 176–264, 1968.
R. Saidur, S. Mekhilef, M. B. Ali, A. Safari, and H. A. Mohammed, “Applications of variable speed drive (VSD) in electrical motors energy savings,” Renew. Sustain. Energy Rev., vol. 16, no. 1, pp. 543–550, 2012.
K. Sagar and K. Sanchit, “I j e s m,” vol. 7, no. March, pp. 318–322, 2017.
N. S. Vanjari, M. Sawant, P. S. Sisodiya, and S. B. Patil, “Design of Circular Overhead Water Tank,” vol. 2, no. 7, pp. 69–81, 2017.
Downloads
Additional Files
Published
How to Cite
Issue
Section
License
The copyright to this article is transferred to Universitas Mercu Buana (UMB) if and when the article is accepted for publication. The undersigned hereby transfers any and all rights in and to the paper including without limitation all copyrights to UMB. The undersigned hereby represents and warrants that the paper is original and that he/she is the author of the paper, except for material that is clearly identified as to its original source, with permission notices from the copyright owners where required. The undersigned represents that he/she has the power and authority to make and execute this assignment.
We declare that:
1. This paper has not been published in the same form elsewhere.
2. It will not be submitted anywhere else for publication prior to acceptance/rejection by this Journal.
3. A copyright permission is obtained for materials published elsewhere and which require this permission for reproduction.
Furthermore, I/We hereby transfer the unlimited rights of publication of the above mentioned paper in whole to UMB. The copyright transfer covers the exclusive right to reproduce and distribute the article, including reprints, translations, photographic reproductions, microform, electronic form (offline, online) or any other reproductions of similar nature.
The corresponding author signs for and accepts responsibility for releasing this material on behalf of any and all co-authors. This agreement is to be signed by at least one of the authors who have obtained the assent of the co-author(s) where applicable. After submission of this agreement signed by the corresponding author, changes of authorship or in the order of the authors listed will not be accepted.
Retained Rights/Terms and Conditions
1. Authors retain all proprietary rights in any process, procedure, or article of manufacture described in the Work.
2. Authors may reproduce or authorize others to reproduce the Work or derivative works for the authors personal use or for company use, provided that the source and the UMB copyright notice are indicated, the copies are not used in any way that implies UMB endorsement of a product or service of any employer, and the copies themselves are not offered for sale.
3. Although authors are permitted to re-use all or portions of the Work in other works, this does not include granting third-party requests for reprinting, republishing, or other types of re-use.
This work is also licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
