ANALISA PERHITUNGAN BEBAN PENDINGINAN RUANG PERANGKAT INTERNET DI PT. X - SITE KEDATON
DOI:
https://doi.org/10.22441/jtm.v8i3.4581Keywords:
Cooling load, Air Conditioning, beban pendinginan, system HVACAbstract
Abstract -- The cooling process in the internet device room has an important function in maintaining room temperature so that the equipments in the room stay at the desired temperature. With optimal cooling, the equipments in the room are expected to function optimally. The author analyzes the condition of the internet device room with the research method used is by taking field data and analyzing the calculation of the data using formula formulas obtained from the literature. After calculating the data , then the average value of the Thermal load of the room is 3260 Watt, the average of room temperature is 22.95 0 C, the average enthalpy value in the room is 42.72 kJ / kg.a. Then the enthalpy value of the evaporator is 35.86 kJ / kg.a. Then the average value of the mass flow rate coming out of the evaporator is 0.48 Kg / s. From these calculations it can be concluded that the highest room temperature is at 11.00 AM, the average room thermal load value is at 1.20 PM, then the highest enthalpy value of the room occurs at 11.00 AM, then the highest value of enthalpy of the evaporator occurs at 11.00 AM, and the highest average value of mass flow rate occurs at 1.20 PM.
Downloads
References
G. P. Anugrah, A. Ismardi, M. Sc, T. A. Ajiwiguna, and M. Eng, “Rancang Bangun Pendingin Untuk Perangkat Elektronik Pada Green House,” e-Proceeding Eng., vol. 4, no. 3, pp. 3928–3935, 2017.
V. Nomor, P. Pemasangan, E. Fan, D. I. Ruang, F. Teknik, and U. Terhadap, “Keywords : Abstract :,” vol. 15, no. September, pp. 70–76, 2016.
D. Suntoro, R. D. S, and K. Ahadi, “PERHITUNGAN BEBAN PENDINGINAN PADA RUANGAN DI PERKANTORAN PT . INDONESIA POWER UPJP PESANGGARAN BALI COOLING CAPACITY CALCULATION FOR OFFICE BUILDING,” vol. 17, no. 1, pp. 19–30, 2018.
U. Sulawesi, I. Persero, S. A. Safitri, and R. Hantoro, “Desain dan Analisis Sistem Pengkondisian Udara Berbasis Computational Fluid Dynamics ( CFD ),” vol. 7, no. 1, pp. 95–100, 2018.
H. Abdurrachman, M. Sibarani, and J. V. Tuapetel, “Perancangan Air Conditioning ( AC ) Sentral pada Gedung G Institut Teknologi Indonesia,” vol. 2, no. 2, pp. 35–41, 2018.
Khoeri, A. Solichan, and S. Raharjo, “Efisiensi MusiCool-22 Dengan Proses Retrofit Pada AC Merek Daikin 3 PK Di Unit Rektorat Unimus,” Media Elektr., vol. 10, no. 1, pp. 39–45, 2017.
S. Harahap, A. Hamid, and I. Hidayat, “Perhitungan Ulang Beban Pendinginan Pada Ruang Auditorium Gedung Manggala Wanabakti Blok III Kementerian Kehutanan Jakarta,” Progr. Stud. Tek. Mesin, Fak. Tek. Univ. Mercu Buana, Jakarta, pp. 149–154, 2014.
A. Kurniawati and G. Doloksaribu, “Tower Universitas Mercu Buana Lantai 5 Dan,” pp. 246–254, 2009.
G. Penumpang and K. Api, “C~26,7,” vol. II, no. November, pp. 37–44, 2016.
P. V. Beban, W. P. Dan, T. Ruang, T. Performasi, and M. Pendingin, “Mastur , Khanif Setiyawan , Bambang Sugiantoro,” vol. 17, no. 1, pp. 43–47, 2016.
A. Aziz, U. Riau, and R. I. Mainil, “Penggunaan Thermal Energy Storage sebagai Penyejuk Udara Ruangan dan Pemanas Air pada Residential Air Conditioning Hibrida,” no. April 2016, 2015.
W. H. Piarah and F. Hamzah, “Penentuan Efisiensi Dan Koefisien Prestasi Mesin Pendingin Merk Panasonic Cu-Pc05Nkj ½ Pk,” vol. 7, pp. 978–979, 2013.
Downloads
Published
How to Cite
Issue
Section
License
The copyright to this article is transferred to Universitas Mercu Buana (UMB) if and when the article is accepted for publication. The undersigned hereby transfers any and all rights in and to the paper including without limitation all copyrights to UMB. The undersigned hereby represents and warrants that the paper is original and that he/she is the author of the paper, except for material that is clearly identified as to its original source, with permission notices from the copyright owners where required. The undersigned represents that he/she has the power and authority to make and execute this assignment.
We declare that:
1. This paper has not been published in the same form elsewhere.
2. It will not be submitted anywhere else for publication prior to acceptance/rejection by this Journal.
3. A copyright permission is obtained for materials published elsewhere and which require this permission for reproduction.
Furthermore, I/We hereby transfer the unlimited rights of publication of the above mentioned paper in whole to UMB. The copyright transfer covers the exclusive right to reproduce and distribute the article, including reprints, translations, photographic reproductions, microform, electronic form (offline, online) or any other reproductions of similar nature.
The corresponding author signs for and accepts responsibility for releasing this material on behalf of any and all co-authors. This agreement is to be signed by at least one of the authors who have obtained the assent of the co-author(s) where applicable. After submission of this agreement signed by the corresponding author, changes of authorship or in the order of the authors listed will not be accepted.
Retained Rights/Terms and Conditions
1. Authors retain all proprietary rights in any process, procedure, or article of manufacture described in the Work.
2. Authors may reproduce or authorize others to reproduce the Work or derivative works for the authors personal use or for company use, provided that the source and the UMB copyright notice are indicated, the copies are not used in any way that implies UMB endorsement of a product or service of any employer, and the copies themselves are not offered for sale.
3. Although authors are permitted to re-use all or portions of the Work in other works, this does not include granting third-party requests for reprinting, republishing, or other types of re-use.
This work is also licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
